You may also like:
New Video Review - Click on the Video Tab Above
Clean and Quiet for Source Components with C7 Power Cables
The C7 version of Pangea Audio’s AC-14 power cord will enhance the performance of CD players, DVD players, satellite receivers, cable boxes, and other components with a C7 power connection.
Pangea Audio's AC-14 power cable is specifically designed for source components, which do not require the same large amounts of current as receivers and amps. The AC-14 provides more than enough current while offering multiple shielding and other features that facilitate extremely clean and noise-free power.
Pangea designed the AC-14 specifically for wide-band delivery of power to line-level AV components. It will enhance the performance of preamps, CD players, DVD players, DACs, and other line-level components.
The AC-14's 99.99% purity OFC conductors provide maximum conductivity, while the 14-awg construction is for optimized line-level current delivery. The two-way multi-gauge geometry with isolated bass conductors enhances audio performance. Counter-spiraled conductors offer superior noise rejection, while the triple shielding provides RF- and EM-interference rejection while optimizing the isolation of sensitive source components.
Superior flexibility means easier installation, and the lightweight design doesn't impede the effectiveness of isolation devices. The AC-14's 24k gold-plated contacts offer superior electrical contact. Special two-shot molded connector bodies protect vital AC connections for maximum current delivery and long life.
Pangea Audio Power Cables
Pangea Audio power cables offer the perfect balance of power, shielding, and flexibility for audiophile components. These cables have been designed, not from the AC wall outlet to the component, but the other way around – from the component to the wall outlet. The result is a cable that not only fully satisfies the 'real power requirements' of audiophile components, but which also delivers improved performance for both power and component isolation.
Pangea's 'component to the wall outlet' design results in a better cable that's designed just for the component you want to power. The cable gives you precisely what you need - no more and definitely no less.
More Isn't Always Better
Until now, all upgrade power cables have been designed according to a 'more is better' philosophy, leading manufacturers to increase the diameter of the conductor and the thickness of the insulation in an attempt to improve performance, but at the expense of flexibility. The resulting thick, noncompliant cables put a severe strain on the chassis of connected components.
Heavy, inflexible cables can also reduce the effectiveness of component isolation and suspension systems. This is a particular problem for sensitive source components (such as preamps, CD players, phono preamps, tuners, and DACs) that are typically placed on lighter suspension systems. Therefore, the AC-14 has been engineered for flexibility and to put less strain on your gear, including isolation accessories.
Note: Each Pangea cable is individually handmade to strict design specifications.
Q: Since the AC-14 is designed for source components, like CD players and preamps, can I still use it for my integrated or stereo power amp?
A: Yes! Thanks to its 14-gauge construction, the AC-14 will deliver many times the current of the stock cable that came with your integrated amp. And with its superior shielding, the AC-14 power cable will deliver far cleaner power, too. So your music will sound cleaner.
Q: Can I use the high-current AC-9 power cable with my preamp, CD player or DAC?
A: Certainly! In some cases, the AC-9 will offer a sonic improvement over the AC-14 when used with source-type components. There are many variables here that affect performance, including the nature of your power and the design of your source component. The best rule of thumb is to try it and see if you like the change. If you experience little of no improvement with the AC-9 and a particular source component, you can always switch back to the AC-14 cable.
Audio Advisor Review - Pangea Audio AC-14 Power Cord
|Product Reviews Click here to review this item|
|This Last Cable Should Be Your First|
I have now completed the retrofit of my entire surround sound system with Pangea power cables: receiver, universal DVD player, solid state and tube headphone amps, fiber optic cable box and t.v. I started with the electronics first, but if you are unsure about these cables, start with the t.v. and cable box first. The visual improvement alone will convince you that these really work well. I have a hard time telling whether I am watching a movie on HBO or a Blu Ray disc.
|- Dave B, FL|
Ive used this cable on the Oppo 95, LED tv, and Marantz cd player with great results each time Ive switched out my stock power cables. Besides the audio sounding better the tv has better black and very clear.
|- Glen D, IL|
|Awesome Sonic Value|
I am a DJ but an Audiophile first. I ordered the AC-14 to try on the cd players in my DJ system. It has improved and cleaned up the sound aswell as give the music more detail, resolution and depth. I have since upgraded to the AC-14SE in both the C7 and IEC for all my source equipment. I use only audiophile grade cables in my system and the results are amazing.
|- Anthony R, NY|