The Power Cable for Better Transient Response and Lower Noise
Enhance the performance of source components, including preamps, CD players, tuners, and more. The Pangea Audio AC-14SE Signature Edition power cable brings the benefits of better transient response and a lower noise floor.
The AC-14SE is a 14-AWG cable that uses three different wire gauges consisting of a combination of solid and Litz conductors. The large-gauge center conductor is made of solid PCOCC copper. Surrounding this conductor are six cores consisting of one medium-gauge solid OFC copper conductor, which in turn is surrounded by six Litz conductors.
The net effect of Jay Victor's patented design is that every conductor is individually insulated. The braided shield is made of silver-plated copper for lower noise.
"The Improvement Is Not Subtle"
In his June 2014 review of the NAD D 3020 hybrid integrated amplifier for Audioxpress.com, Gary Galo notes, "In a high-end application, the amplifier can benefit from a heftier, shielded power cord. I used a Pangea AC-14SE cord. On my system, the improvement in detail, resolution, and spaciousness is not subtle. Since the D 3020 is fitted with a C5 power connection, you'll need an adapter… I recommend Pangea's IEC-C5."
Specifically Designed for Source Components
Pangea Audio's AC-14SE Signature Edition power cable is specifically designed for source components, which do not require the same large amounts of current as receivers and amps. The AC-14SE provides more than enough current while offering multiple shielding and other features that facilitate extremely clean and noise-free power.
Pangea designed the AC-14SE specifically for wide-band delivery of power to line-level AV components. It will enhance the performance of preamps, CD players, DVD players, DACs, and other line-level components.
Superior flexibility means easier installation, and the lightweight design doesn't impede the effectiveness of isolation devices. The AC-14SE's 24k gold-plated contacts offer superior electrical contact. Special two-shot molded connector bodies protect vital AC connections for maximum current delivery and long life.
Pangea Audio Power Cables
Pangea Audio power cables offer the perfect balance of power, shielding, and flexibility for audiophile components. These cables have been designed, not from the AC wall outlet to the component, but the other way around – from the component to the wall outlet. The result is a cable that not only fully satisfies the 'real power requirements' of audiophile components, but which also delivers improved performance for both power and component isolation.
Pangea's 'component to the wall outlet' design results in a better cable that's designed just for the component you want to power. The cable gives you precisely what you need - no more and definitely no less.
More Isn't Always Better
Until now, all upgrade power cables have been designed according to a 'more is better' philosophy, leading manufacturers to increase the diameter of the conductor and the thickness of the insulation in an attempt to improve performance, but at the expense of flexibility. The resulting thick, noncompliant cables put a severe strain on the chassis of connected components.
Heavy, inflexible cables can also reduce the effectiveness of component isolation and suspension systems. This is a particular problem for sensitive source components (such as preamps, CD players, phono preamps, tuners, and DACs) that are typically placed on lighter suspension systems. Therefore, the AC-14SE has been engineered for flexibility and to put less strain on your gear, including isolation accessories.
Note: Each Pangea cable is individually handmade to strict design specifications.
"In a high-end application, the amplifier can benefit from a heftier, shielded power cord. I used a Pangea AC-14SE cord. On my system, the improvement in detail, resolution, and spaciousness is not subtle. Since the D 3020 is fitted with a C5 power connection, you'll need an adapter… I recommend Pangea's IEC-C5."
- Gary Galo, Audioxpress.com, June 2014 (review of the NAD D 3020 hybrid integrated amplifier)
|Product Reviews Click here to review this item|
|You Must Buy This Cable|
I now own nearly 5 Pangea Power Cables. I use them for my receiver, CD player, sub woofer, TV and PC. There is nothing and I mean nothing that compares to them. The construction and performance are first rate. I urge you to price out power cables and see what the highend ones cost. Then look at Pangea. You get the same if not more for a fraction of the cost. I have written a review or two of this cable on Amazon.
|- Brooke E, VA|
|Awesome price for such a huge upgrade|
I bought this cable a few weeks ago to use on my Marantz AV7701 Pre/Pro. It is so annoying that such a huge company like Marantz, would include such a cheap power cable with an almost $2000.00 piece of equipment. They all do though. Anyway, this cable made everything sound so much cleaner and tighter than with the stock cable. This is the best bang for your buck upgrade that I can think of.
|- Stephen J, OR|
|AC-14SE C-7 a must-buy for the Traveler turntable|
I recently purchased a new button-on- top Traveler turntable. I was somewhat non-plused to find the power source to be long thin wall-wart type plug-in wire attached to a small box with a C-7 outlet for the enclosed power cord. That cord can best be described as functional. Hey, I DO want the costs going to the tone-arm, platter and other important bits and this IS a VPI budget model. Great and recommended out of the box! Aside from the cartridge, the biggest improvement is the Pangea AC-14SE c-7 power cord and its also cheap at the price. Because the power-wire is a few feet long you dont need a long AC14SE. I ordered a 1 meter length but I could have gotten by with a half-meter. Pangea makes a dedicated C-7 wire and it works for us 97 percent audiophiles with our budget-stretching purchase of the equally outstanding VPI Traveler.
|- Doug C, CA|
|Another big pangea ac14se fan|
I too was a skeptic about power cord upgrades. Then I was talking to a sales rep at a dealer I highly respect, and he said the improvement would be at least as good as an interconnect upgrade. I thought, for $50 1m cable what could I lose? I put the Pangea cable on my CD player, and after only 4 hours of burn in, I am now a believer! Lower noise floor, fuller & tighter bass, and improved dynamics and transients - all for less than 1/4 of the cost of a recent CD player interconnect upgrade to what most audiophiles would consider inexpensive interconnects. I just ordered another 14se cord for my pre/pro, I was so impressed. Talk about bang for the buck!
|- Stan H, WA|
|I had no idea|
I have long believed in cable upgrades for line level and speakers but hadnt thought much about upgrading power cables. When I saw the price of a 1.5m AC-14S and had 30 days to try it out I figured I couldnt go wrong. I replaced the power cords on my Mark Levinson No. 28 preamp and Cambridge Audio 840C. Wow! I did not expect the improvement in imaging, bass and focus I heard. The system also now sounds quiter when appropreate as though some background haze is now gone. The build quality of the cords is also quite good. What more is there to say? Too often you shell out a lot of money and dont hear much improvement. These power cords were well worth the money. To hear such an improvement for so little money is refreshing. I highly recomend this product.
|- David N, MD|
|Excellent Cable Delivers the Goods|
This being my 3rd Pangea another AC-14 & the AC-9 which Im using to supply the AC to my Krell KSP-7Bs external power supply. I truly believe this cable provides a VERY cost effective sonic upgrade...sure you can spend $Ks more but why? Great cable and awesome built quality--Audio Advisor just plain Rocks!!
|- Craig A, UT|
|Unbelievable Performance Upgrade|
As an owner of the Pangea AC-9 power cables for my two mono block amps, I wanted to upgrade my Oppo blu-ray player and tube amplifier power cables. The Pangea AC-14SE delivers incredible sonic definition to my system. A no brainer of an upgrade for the price. Look no further, hands down these Pangea AC-14SE cables are magical in their performance. Highly recommended product!!! Audio Advisor has great service too.
|- Jeff M, CO|
|Praise the Pangea!|
There comes those times when you make a change in your system that makes you realize you made a wise choice. There is so much hype out there for audiophiles, you have to weed yourself through the nonsense. I am using the Ac-14 SE on my Tube DAC. As per my conversation with audiophiles and WS Distributing, I broke the cord in for 5 days. The change I noticed was not subtle. I know there is noise on the AC line this year and the cord addresses this issue. The background is blacker and quieter which allows greater retrieval of ambient detail. The bass was tighter and had more punch. I was drawn in to the music and I wanted to keep listening. The image seemed tighter with more focus. The music was conveyed and that is what matters most! Keep up the great work Pangea!
|- PAUL L, NY|
|pangea 14 se|
excellent power cord that compares favorably with much more expensive cords. an important thing is that one should definitely let it break in for at least 50 hours. Than the bass goes from somewhat mushy to deep but tight and the rest of the sound really improves. it works great on my cambridge top of the line cd player.
|- ivan c, NY|