{"title":"Interconnect Cables","description":"","products":[{"product_id":"analysis-plus-oval-one-interconnect-cable-0-5-meter-rca-to-rca-single","title":"Analysis Plus Oval One Interconnect Cable - 0.5 Meter - RCA to RCA - Single","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eOval One Is the Entry to Analysis Plus's Hollow Oval Interconnects\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's Oval One is the least expensive RCA cable the Michigan company makes. It uses the same hollow oval conductor idea as the dearer cables. It is handmade and fully shielded. The plugs are 75 ohm RCAs that are pressed onto the wire, not soldered.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eA Braided Hollow Oval Under a Braided Shield\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe signal path is a braided copper conductor woven into Analysis Plus's hollow oval shape. The oval keeps the outgoing and return paths close together, and the hollow center drops metal that carries little current. A braided outer shield gives full coverage, which Analysis Plus says keeps the noise floor low.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eThe Solder-Less 75 Ohm RCA Plug, Explained\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOval One ends in a true 75 ohm RCA plug with a low-loss dielectric. Analysis Plus joins it to the cable by compression contact instead of solder. The company says this spares the insulation the heat that soldering brings. There is no cold solder joint to pass the signal poorly. \u003cem\u003eGoodSound!\u003c\/em\u003e found the plugs gave a tight fit.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eGoodSound!\u003c\/em\u003e reviewed Oval One on March 1, 2002: \"I enjoyed the increased weight and power of the music, along with the system's improved transparency.\" It added that \"everything sounded just a little bit clearer and more refined.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe same review called the gain incremental and said cables like these \"should not be used to compensate for poor-sounding components.\" It found Oval One \"priced reasonably enough that the cost of this upgrade is easy to justify.\"\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are replacing the cable that came in the box\u003c\/strong\u003e — Oval One is handmade and fully shielded, so the first upgrade is a real one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want no solder in the path\u003c\/strong\u003e — the plug is pressed onto the wire, so there is no solder joint to go cold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the braided shield covers the whole cable, so hum from the shelf stays out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou may move up later\u003c\/strong\u003e — every Analysis Plus cable above this one uses the same hollow oval idea, so each step feels familiar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou expect a big change\u003c\/strong\u003e — \u003cem\u003eGoodSound!\u003c\/em\u003e heard an incremental gain, not a transformation. If your system already has a fault, fix the component first. Or call us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Oval One from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/music-streamers\" style=\"color:#8a5a2b;\"\u003eMusic Streamers\u003c\/a\u003e\u003c\/strong\u003e — streamer output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the solder-less 75 ohm RCA plug?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's own RCA plug, rated at 75 ohms with a low-loss dielectric. It is pressed onto the cable by compression contact, so no solder heats the insulation.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the hollow oval design?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's own conductor shape. At high frequencies current crowds to the outside of a wire and bunches unevenly. The oval keeps the outgoing and return paths close, and the hollow center drops the metal that would carry little current.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Analysis Plus give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOne year against mechanical defects, from the date of purchase, on cables sold as new. Keep your proof of purchase. The warranty is not transferable and does not cover cables that have been altered or misused.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/analysis-plus-chocolate-oval-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eAnalysis Plus Chocolate Oval\u003c\/a\u003e is the next rung. It moves to a balanced, in-wall rated cable with Analysis Plus's non-locking RCA plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Analysis Plus","offers":[{"title":"0.5 Meter \/ Single \/ New","offer_id":47391564497069,"sku":"NEW-ANOV1-0.5-SIN-RCRC","price":46.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/ANOV1_RCRC_01_2024__13830.1708706396.1280.1280_90ccad7a-68a4-4eb2-9ce0-94dafa2afa2a.jpg?v=1778105920"},{"product_id":"kimber-kable-pbj-interconnect-cable-5-0-meter-xlr-to-xlr-pair","title":"Kimber Kable PBJ Interconnect Cable - 5.0 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003ePBJ Is the Kimber Cable That Made the Braid Famous\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's PBJ has been in the line since the late 1980s. It is three conductors, braided, with no jacket and no shield. Kimber calls the construction simple and elegant. Reviewers have called it a classic. It is still made by hand in Ogden, Utah.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree Hyper-Pure Copper Conductors\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Kimber's VariStrand hyper-pure copper. Each is a bundle of strands in several gauges. The three are woven in Kimber's tri-braid field geometry, the pattern that rejects noise without a shield around it.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eA Fluorocarbon Dielectric You Can See\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor sits in its own extruded fluorocarbon jacket. That is the clear insulation that gives the PBJ its look. For the balanced cable Kimber publishes 45.7 pF of capacitance and 1.01 µH of inductance per meter. Low capacitance keeps a line-level signal intact over a longer run.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Switchcraft XLR Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003ePBJ ends in the plug Kimber fits to its balanced cables: a studio-grade Switchcraft XLR with silver-plated contact pins. Kimber solders it on by hand under nitrogen in Ogden, Utah. The plug latches into the jack and will not pull loose by accident. The silver plating keeps the contact clean.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCorey Greenberg, writing in \u003cem\u003eStereophile\u003c\/em\u003e on July 1, 1993, called the PBJ \"reference-level wire you can actually afford.\" The review helped make the cable a staple of budget systems.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eStephen Mejias, in \u003cem\u003eStereophile\u003c\/em\u003e on June 20, 2012, heard \"an outstanding job of re-creating the performance space.\" The PBJ remains in \u003cem\u003eStereophile\u003c\/em\u003e's 2026 Recommended Components.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the original Kimber braid\u003c\/strong\u003e — the PBJ is the cable the line was built on, so you are buying the reference point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the tri-braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou dress cables in tight spaces\u003c\/strong\u003e — three thin jacketed wires bend where a fat cable will not, so the plugs sit square on the jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the Switchcraft XLR latches into the jack and its silver-plated pins resist tarnish, so the connection stays put\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the PBJ XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-pbj-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eKimber PBJ RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the PBJ from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat XLR connector does Kimber use?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA studio-grade Switchcraft XLR with silver-plated contact pins. Kimber names it on its balanced Tonik, PBJ, Silver Streak, Hero HB and Hero AG. Kimber solders it on by hand under nitrogen.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of copper strands in more than one gauge. Kimber uses this stranding in every interconnect it makes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs the PBJ shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber relies on the tri-braid geometry to reject noise, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the PBJ?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-timbre-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Timbre XLR\u003c\/a\u003e is the next rung. It keeps the three-wire braid and adds a low-loss fluorocarbon dielectric, with the same Switchcraft XLR plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor looks at the PBJ, its braid and its plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/ra8Dfvb-Oj0\" title=\"Kimber Kable PBJ Interconnect – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"5.0 Meter \/ Pair \/ New","offer_id":45980505604269,"sku":"NEW-KKPBBAL-5-PR-XLXL","price":372.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKPBBAL_XLXL_01_2024__78430.1731350068.1280.1280_91092de7-3dd2-4c58-bb6f-1c895bbca911.jpg?v=1778136782"},{"product_id":"analysis-plus-oval-one-interconnect-cable-2-0-meter-rca-to-rca-pair","title":"Analysis Plus Oval One Interconnect Cable - 2.0 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eOval One Is the Entry to Analysis Plus's Hollow Oval Interconnects\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's Oval One is the least expensive RCA cable the Michigan company makes. It uses the same hollow oval conductor idea as the dearer cables. It is handmade and fully shielded. The plugs are 75 ohm RCAs that are pressed onto the wire, not soldered.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eA Braided Hollow Oval Under a Braided Shield\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe signal path is a braided copper conductor woven into Analysis Plus's hollow oval shape. The oval keeps the outgoing and return paths close together, and the hollow center drops metal that carries little current. A braided outer shield gives full coverage, which Analysis Plus says keeps the noise floor low.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eThe Solder-Less 75 Ohm RCA Plug, Explained\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOval One ends in a true 75 ohm RCA plug with a low-loss dielectric. Analysis Plus joins it to the cable by compression contact instead of solder. The company says this spares the insulation the heat that soldering brings. There is no cold solder joint to pass the signal poorly. \u003cem\u003eGoodSound!\u003c\/em\u003e found the plugs gave a tight fit.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eGoodSound!\u003c\/em\u003e reviewed Oval One on March 1, 2002: \"I enjoyed the increased weight and power of the music, along with the system's improved transparency.\" It added that \"everything sounded just a little bit clearer and more refined.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe same review called the gain incremental and said cables like these \"should not be used to compensate for poor-sounding components.\" It found Oval One \"priced reasonably enough that the cost of this upgrade is easy to justify.\"\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are replacing the cable that came in the box\u003c\/strong\u003e — Oval One is handmade and fully shielded, so the first upgrade is a real one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want no solder in the path\u003c\/strong\u003e — the plug is pressed onto the wire, so there is no solder joint to go cold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the braided shield covers the whole cable, so hum from the shelf stays out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou may move up later\u003c\/strong\u003e — every Analysis Plus cable above this one uses the same hollow oval idea, so each step feels familiar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou expect a big change\u003c\/strong\u003e — \u003cem\u003eGoodSound!\u003c\/em\u003e heard an incremental gain, not a transformation. If your system already has a fault, fix the component first. Or call us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Oval One from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/music-streamers\" style=\"color:#8a5a2b;\"\u003eMusic Streamers\u003c\/a\u003e\u003c\/strong\u003e — streamer output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the solder-less 75 ohm RCA plug?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's own RCA plug, rated at 75 ohms with a low-loss dielectric. It is pressed onto the cable by compression contact, so no solder heats the insulation.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the hollow oval design?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's own conductor shape. At high frequencies current crowds to the outside of a wire and bunches unevenly. The oval keeps the outgoing and return paths close, and the hollow center drops the metal that would carry little current.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Analysis Plus give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOne year against mechanical defects, from the date of purchase, on cables sold as new. Keep your proof of purchase. The warranty is not transferable and does not cover cables that have been altered or misused.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/analysis-plus-chocolate-oval-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eAnalysis Plus Chocolate Oval\u003c\/a\u003e is the next rung. It moves to a balanced, in-wall rated cable with Analysis Plus's non-locking RCA plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Analysis Plus","offers":[{"title":"2.0 Meter \/ Pair \/ New","offer_id":45980508684461,"sku":"NEW-ANOV1-2-PR-RCRC","price":142.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/ANOV1_RCRC_01_2024__24956.1710435523.1280.1280_983605ba-8f24-43d5-9c10-2cf7a1c7891a.jpg?v=1778133368"},{"product_id":"kimber-kable-hero-interconnect-cable-4-0-meter-wbt-114-rcas-single","title":"Kimber Kable Hero Interconnect Cable - 4.0 Meter - WBT 114 RCA's - Single","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eHero Is Kimber's Four-Wire Braid\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Hero is the interconnect Kimber built around four conductors instead of three. It sits in Kimber's Ascent Series and has been a reviewer favorite for many years. Like every Kimber cable, it is braided and terminated by hand in Ogden, Utah.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eFour 19 AWG Copper Conductors in a Quadratic Braid\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is 19 AWG VariStrand copper, a bundle of strands in more than one gauge. The four are woven in what Kimber calls a quadratic braid. Kimber says the braid gives wide bandwidth and noise reduction without the use of shielding.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eVirgin FEP Insulation and Hand-Soldered Ends\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber insulates each conductor with virgin FEP, a fluorocarbon it applies in single and dual layers. It publishes the result: 78 pF of capacitance, 0.385 µH of inductance and 0.037 ohms of resistance per meter. The plugs are soldered on by hand under nitrogen, which keeps the joint clean as it cools.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe WBT-0114 Cu Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHero ends in the WBT-0114 Cu, a plug WBT builds under its nextgen name. The signal contacts are pure oxygen-free copper. A brass sleeve tied to the ground contact provides the shielding, and WBT rates the plug at 75 ohms to 400 MHz. The metal parts are a copper alloy plated in 24-carat gold.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe barrel locks on with WBT's patented collet clamp, a two-section sleeve in a ruthenium finish that works like the chuck on a drill. Twist the barrel and the plug tightens onto the jack. The center pin is slotted so it springs against the socket.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eThe Absolute Sound\u003c\/em\u003e staff, in the 2017 Editors' Choice list published April 6, 2017, wrote that \"Hero's bass lives up to its name, prodigious in amplitude and definition.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eJason Kennedy, reviewing for \u003cem\u003ehi-fi+\u003c\/em\u003e on January 17, 2018, found that \"as soon as you drop it into the system the timing comes into focus.\" \u003cem\u003eStereophile\u003c\/em\u003e’s 2026 Recommended Components calls Hero the \"strong, silent type\" among cables.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want more than a three-wire cable gives\u003c\/strong\u003e — Kimber designed Hero's four-wire braid for wide bandwidth, so the whole range gets through\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the quadratic braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou value bass weight\u003c\/strong\u003e — \u003cem\u003eThe Absolute Sound\u003c\/em\u003e singled out Hero's low end for its size and definition, so kick drums land\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the WBT-0114 Cu's collet clamp tightens onto the jack, so the connection cannot work loose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — Hero is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-hero-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Hero XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Hero from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Slide each WBT plug onto the jack, then turn the barrel to tighten the clamp. Loosen it before you pull the plug off.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the WBT-0114 Cu connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA WBT nextgen RCA plug with pure oxygen-free copper contacts, a shielding brass sleeve on the ground side, gold-plated copper-alloy metalwork and a twist-to-lock collet clamp.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs WBT 114 the same plug as WBT-0114 Cu?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eYes. Audio Advisor titles write it as WBT 114, WBT 114Cu or WBT 0114Cu. They are all the copper version of WBT's 0114 nextgen plug.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of strands in more than one gauge. Kimber uses this stranding in every interconnect it makes and says the mix of gauges spreads the signal across the bundle.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs Hero shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber says the four-wire quadratic braid provides the noise reduction, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy four conductors instead of three?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHero has four 19 AWG conductors where Kimber's three-wire cables have three. Kimber says the four-wire quadratic braid provides wide bandwidth and noise reduction without shielding.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from Hero with WBT-0114 Cu plugs?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-silver-streak-interconnect-cable-1-0-meter-pair-ultraplate-black-rca-to-rca\" style=\"color:#8a5a2b;\"\u003eKimber Silver Streak\u003c\/a\u003e is the next rung. It moves to Kimber's Summit Series and adds a silver conductor to two copper ones.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor looks at the Hero braid and its plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/p9tconXVYVI\" title=\"Kimber Kable Hero Interconnect with WBT 0144's – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eThe balanced version of the same cable, for a look at how Kimber terminates it.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/mm7bNwYYE3w\" title=\"Kimber Kable Hero Interconnect with XLR'S – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"4.0 Meter \/ Single \/ New","offer_id":45980510552237,"sku":"NEW-KKHE114-4-SIN-RCRC","price":385.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKHE114__68080.1692298719.1280.1280_ef7681bd-8235-4c50-832f-5bac7d87f617.jpg?v=1778138191"},{"product_id":"cardas-audio-clear-beyond-interconnect-cable-1-5-meter-xlr-to-xlr-pair","title":"Cardas Audio Clear Beyond Interconnect Cable - 1.5 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eClear Beyond Is Cardas with Nothing Held Back\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Clear Beyond is the company's flagship interconnect. Cardas says it brings noteworthy gains in spatial imaging, dynamics and low-frequency impact over the Clear. The Cardas musicality stays. Each cable is made to order and hand terminated in Bandon, Oregon, by Cardas's senior technicians.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eStrands Down to 47 Gauge\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Cardas Grade 1 copper, 99.9999% pure, drawn to strands between 47 AWG and 39 AWG and built as Litz wire. Each is a Matched Propagation conductor on a Kevlar core, with strand sizes stepped in Golden Ratio proportions. Four conductors run at 26.5 AWG.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eStar-Quad, Two Rings of Air Tubes and a 13 mm Body\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe four conductors sit in a star-quad, each inside an anti-static LDPE air tube. Carbon-impregnated PTFE tape binds them. A second ring of PTFE air tubes, scaled 1.618 times larger than the core tubes, holds the composite shield of tinned copper and magnet wire away from the signal.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor wears an ultra-thin extruded PTFE jacket, and an ultra-soft TPR jacket finishes the cable. All of that adds up to an outside diameter of 0.511 inches, or 13 mm. It is the largest in the Cardas interconnect line. Cardas says no Cardas interconnect is as demanding to build. So it is made in small quantities.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CG XLR, Redesigned for a 13 mm Cable\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eClear Beyond ends in the Cardas CG XLR, the company's reference cable-mount XLR. It is a three-piece threaded design in high-copper, non-magnetic brass, with silver contacts under a rhodium flash. A fourth solder pin bonds the shell to the body, and a red or black O-ring marks the channel. Cardas redesigned it to take the Beyond's 13 mm body.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHerb Reichert, in \u003cem\u003eStereophile\u003c\/em\u003e's Gramophone Dreams column on August 11, 2022, wrote that with the Clear Beyond \"the apparent volume of the recording venue expanded dramatically.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAlan Sircom, reviewing for \u003cem\u003ehi-fi+\u003c\/em\u003e on July 31, 2017, found that \"Beyond is exceptionally good at those 'inter-transient silences'.\" He closed with \"Very highly recommended!\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eIt is a \u003cem\u003eStereophile\u003c\/em\u003e Recommended Component in the 2025 edition, a \u003cem\u003ehi-fi+\u003c\/em\u003e Editor's Choice for 2024, and a \u003cem\u003eThe Absolute Sound\u003c\/em\u003e Editors' Choice for 2019.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are finishing a reference system\u003c\/strong\u003e — the Clear Beyond is the top of the Cardas line, so there is no further rung to wonder about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour rack radiates\u003c\/strong\u003e — the composite shield rides on its own ring of air tubes, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want plug and cable from one shop\u003c\/strong\u003e — CG XLR and cable are both Cardas, machined and terminated in Bandon, so one maker stands behind the assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou keep cables for decades\u003c\/strong\u003e — every Litz strand is enamel sealed and Cardas backs it for life, so nothing corrodes and no clock is running\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Clear Beyond XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-beyond-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Beyond RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Clear Beyond from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/preamplifiers\" style=\"color:#8a5a2b;\"\u003ePreamplifiers\u003c\/a\u003e\u003c\/strong\u003e — source to preamp, preamp to amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/stereo-amplifiers\" style=\"color:#8a5a2b;\"\u003eStereo Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the power amp end of a separates system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to preamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/power-cables\" style=\"color:#8a5a2b;\"\u003ePower Cables\u003c\/a\u003e\u003c\/strong\u003e — clean power at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CG XLR connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's reference cable-mount XLR. A three-piece threaded brass body, silver contacts under a rhodium flash, a fourth solder pin to bond the shell, and a red or black O-ring to mark the channel.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy is the cable 13 mm thick?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTwo rings of air tubes and the composite shield take room. Cardas says the shielding and air-tube suspension are what bring the body to 0.511 inches.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eDoes the 13 mm body need an adaptor with XLR?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe balanced version needs none. Cardas redesigned the CG XLR to take the Clear Beyond's 13 mm body, so the cable ends in the plug alone.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Clear Beyond is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, reference systems, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"1.5 Meter \/ New","offer_id":45980514615469,"sku":"NEW-CRCLBEIC-1.5-PR-XLXL","price":6750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLBEIC_XLXL_3QT1__12761.1689623244.1280.1280_9f430c8c-bccd-4050-88e8-51b629a4a741.jpg?v=1778098066"},{"product_id":"analysis-plus-chocolate-oval-interconnect-cable-3-0-meter-rca-to-rca-pair","title":"Analysis Plus Chocolate Oval Interconnect Cable - 3.0 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eChocolate Oval Is the In-Wall Rated Analysis Plus Interconnect\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's Chocolate Oval is the company's premium in-wall rated cable. It carries UL and CSA FT4 ratings, so it can run inside a wall or a ceiling. It is also the first in-wall cable Analysis Plus built as a balanced design, and it ends in the company's non-locking RCA plug.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eA Balanced Layout Inside an In-Wall Jacket\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eChocolate Oval uses Analysis Plus's hollow oval conductor geometry. The oval keeps the outgoing and return paths close, and the hollow center drops metal that carries little current. Because the cable is a balanced design, Analysis Plus says it rejects common-mode noise better, for an ultra low noise floor. That matters most on long runs.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eThe Non-Locking RCA Plug, Explained\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eChocolate Oval ends in what Analysis Plus calls its new non-locking RCA connector, a gold plug the company uses on many of its cables. A non-locking plug pushes straight onto the jack and pulls straight off. There is no barrel to twist, so it fits crowded rear panels. The same cable can be ordered with XLR plugs.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are running cable inside a wall\u003c\/strong\u003e — Chocolate Oval is UL and CSA FT4 rated, so it meets the code an installer will ask about\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour run is long\u003c\/strong\u003e — the balanced layout rejects common-mode noise, so a long path through a house stays quiet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a simple plug\u003c\/strong\u003e — the non-locking RCA pushes on and pulls off, so tight rear panels are no problem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a home theater cable with hi-fi roots\u003c\/strong\u003e — it uses the same hollow oval geometry as Analysis Plus's listening cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — Chocolate Oval is single-ended RCA. If both components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/analysis-plus-chocolate-oval-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eAnalysis Plus Chocolate Oval XLR\u003c\/a\u003e instead. Or call us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Chocolate Oval from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/music-streamers\" style=\"color:#8a5a2b;\"\u003eMusic Streamers\u003c\/a\u003e\u003c\/strong\u003e — streamer output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the non-locking RCA plug?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's own gold RCA plug, used on many of its cables. It pushes straight onto the jack with no locking barrel, so it suits crowded rear panels and pulls off without a twist.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does in-wall rated mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eChocolate Oval carries UL and CSA FT4 ratings. Those are flame ratings for cable run inside walls and ceilings. Most hi-fi cables do not carry them.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Analysis Plus give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOne year against mechanical defects, from the date of purchase, on cables sold as new. Keep your proof of purchase. The warranty is not transferable and does not cover cables that have been altered or misused.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/analysis-plus-copper-oval-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eAnalysis Plus Copper Oval\u003c\/a\u003e is the next rung. It moves to three 18 gauge oxygen-free copper conductors in FEP insulation, in a slimmer jacket.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Analysis Plus","offers":[{"title":"3.0 Meter \/ New","offer_id":45980520120493,"sku":"NEW-ANCHOVI-3-PR-RCRC","price":307.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/anchovi_rca-large__42694.1710436338.1280.1280.jpg?v=1778105758"},{"product_id":"kimber-kable-tonik-interconnect-cable-1-5-meter-rca-to-rca-pair","title":"Kimber Kable Tonik Interconnect Cable - 1.5 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eTonik Is the First Rung of the Kimber Ladder\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Tonik is the least expensive interconnect Kimber makes. It is built the way every Kimber cable is built: three conductors braided by hand in Ogden, Utah. Kimber names it after the first note of a scale. The aim is a base that is accurate before it is anything else.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree Copper Conductors in a Tri-Braid\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Kimber's VariStrand copper. Each is a bundle of strands in more than one gauge. Kimber says the mix of gauges spreads the signal across the bundle. The three are woven in Kimber's tri-braid field geometry. The braid is the noise control; there is no separate shield.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eA PE Dielectric and a Plug Kimber Machines Itself\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber insulates the Tonik with what it calls a special-recipe PE, or polyethylene, dielectric. Kimber publishes the result: 52 pF of capacitance and 0.772 µH of inductance per meter of cable. Low capacitance keeps a line-level signal intact over a longer run.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Ultratike Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTonik ends in the Ultratike, Kimber's own entry RCA plug. Kimber machines it from solid metal stock. It carries the Ultraplate contact surface. Kimber says that surface gives high conductivity and durability, and works with any plating on your gear. Inside is a solid Teflon dielectric and a split center pin that grips the jack.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eArt Dudley, writing in \u003cem\u003eStereophile\u003c\/em\u003e on November 23, 2011, found the Toniks \"offered clarity without brightness, and reasonably good amounts of color, texture, and touch.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe Tonik still appears in the 2026 edition of \u003cem\u003eStereophile\u003c\/em\u003e’s Recommended Components, which lists the cables its writers have used and stand behind.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are replacing the cable that came in the box\u003c\/strong\u003e — the Tonik is built by hand in Utah from Kimber's own copper, so the first upgrade is a real one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the tri-braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that grips\u003c\/strong\u003e — the Ultratike's split center pin seats firmly on the jack, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou may move up later\u003c\/strong\u003e — every Kimber interconnect above the Tonik uses the same braid idea, so you will know the house sound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — the Tonik is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-tonik-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Tonik XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Tonik from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each Ultratike plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/turntables\" style=\"color:#8a5a2b;\"\u003eTurntables\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the Ultratike connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber's own entry RCA plug. It is machined from solid metal, uses Kimber's Ultraplate contact surface, and has a solid Teflon dielectric and a split center pin.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of copper strands in more than one gauge. Kimber uses this stranding in every interconnect it makes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs the Tonik shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber relies on the tri-braid geometry to reject noise, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Tonik?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-pbj-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eKimber PBJ\u003c\/a\u003e is the next rung. It keeps the tri-braid and moves to a fluorocarbon dielectric and the Ultraplate plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"New","offer_id":47238469845165,"sku":"NEW-KKTON-1.5-PR-RCRC","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKTON_RCRC_01_2023__27318.1692300755.1280.1280_541d8249-7ba0-4093-a650-c3c0e0a06b93.jpg?v=1778138826"},{"product_id":"cardas-audio-clear-sky-interconnect-cable-3-5-meter-xlr-to-xlr-pair","title":"Cardas Audio Clear Sky Interconnect Cable - 3.5 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eClear Sky Is Where Matched Propagation Starts\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Clear Sky is the entry to the Cardas Clear line, and the first Cardas interconnect to use Matched Propagation conductors. Cardas describes it as transparent, dynamic and neutral. The copper is Grade 1, 99.9999% pure, built as Litz wire around a Kevlar core.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy Cardas Slows the Conductor Down\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eMatched Propagation is George Cardas's answer to a timing problem. A signal moves through copper faster than a charge moves through the insulation around it. Cardas says the lag smears low-level detail. Rather than add a network, Cardas sets the twist rate of each strand layer so the conductor's speed matches the dielectric's.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eAir Tubes, Thin Tape and a Shield Held at a Distance\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTwo conductors at 23.5 AWG form a shielded twisted pair. Each sits in a non-conductive poly-e air tube, and the pair is bound in an ultra-thin FEP tape. A second layer of compressed air tubes then holds the tin-plated copper braided shield away from the conductors.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn extruded alcryn rubber jacket finishes the cable at 9.27 mm across. Cardas builds the Clear Sky for long or short runs alike, and says it suits any high-end system. Each cable is hand terminated in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CE XLR, Built by Cardas\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eClear Sky ends in the Cardas CE XLR, the company's own XLR plug and its standard balanced termination here. The body is machined high-copper, non-magnetic brass and the contacts are silver plated. Cardas solders it to the cable by hand in Bandon, Oregon.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the Clear line's core idea at its entry point\u003c\/strong\u003e — Matched Propagation conductors are what the whole Clear range is built on, so you are buying the principle itself\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies and routers\u003c\/strong\u003e — the braided shield rides on air tubes, off the conductors, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need a long run\u003c\/strong\u003e — Cardas says Clear Sky is excellent in long or short lengths, so a source across the room is not a compromise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the CE XLR's latch holds it in the jack, and its brass body and silver contacts resist corrosion, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Clear Sky XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-sky-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Sky RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Clear Sky from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/music-streamers\" style=\"color:#8a5a2b;\"\u003eMusic Streamers\u003c\/a\u003e\u003c\/strong\u003e — streamer output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is Matched Propagation?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's conductor design. It sets the twist rate of each strand layer so the signal in the copper travels at the same speed as the charge in the insulation. Cardas says that keeps low-level detail from smearing.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CE XLR connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's own XLR plug, its standard balanced termination on the Crosslink through Clear Cygnus. High-copper, non-magnetic brass body, silver-plated contacts, hand soldered in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Clear Sky?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-cygnus-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Cygnus XLR\u003c\/a\u003e is the next rung. It moves to four conductors in a star-quad, adds a second layer of PTFE air tubes, and keeps the CE XLR plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Clear Sky is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, cable geometry, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"3.5 Meter \/ Pair \/ New","offer_id":45980594340013,"sku":"NEW-CRCLSKYIC-3.5-PR-XLXL","price":1545.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLSKYIC_XLR-large__76196.1695390174.1280.1280_e2b637dd-9e67-4e1f-965b-c647c8c1f42b.jpg?v=1778094764"},{"product_id":"cardas-audio-clear-cygnus-interconnect-cable-2-0-meter-xlr-to-xlr-pair","title":"Cardas Audio Clear Cygnus Interconnect Cable - 2.0 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eClear Cygnus Borrows the Flagship's Suspension\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Clear Cygnus takes the air-tube suspension of the Cardas flagship, the Clear Beyond, and builds a more economical version of it. Cardas says so in as many words. It replaced the Clear Light in the line. Each cable is hand terminated in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eAir Tubes Inside Air Tubes\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Cardas Grade 1 copper, 99.9999% pure, in Litz form with each strand enamel coated. Each is a Matched Propagation conductor wound on a Kevlar core, with strand sizes stepped in Golden Ratio proportions. Four conductors run at 25.5 AWG.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFour Conductors, a Composite Shield, and a Golden Ratio Gap\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe four conductors sit in a star-quad, each inside an anti-static LDPE air tube. Carbon-impregnated PTFE tape binds the group. Around that, a second ring of PTFE air tubes, scaled 1.618 times larger than the core tubes, holds the shield away from the conductors.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe shield is a composite of tinned copper and magnet wire. A double layer of PTFE tape jackets the conductors, and an ultra-soft extruded TPR jacket finishes the cable at 9.76 mm across. The 1.618 spacing is the Golden Ratio again, applied to the gap rather than the strands.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CE XLR, at the Top of Its Range\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eClear Cygnus is the last Cardas interconnect to carry the CE XLR before the line moves to the reference CG XLR. The CE XLR is machined from high-copper, non-magnetic brass with silver-plated contacts, and Cardas solders it to the cable by hand in Bandon, Oregon.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the flagship's suspension in a normal rack\u003c\/strong\u003e — the Cygnus carries a more economical version of the Clear Beyond's geometry at 9.76 mm, so the idea fits without the bulk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies and routers\u003c\/strong\u003e — the composite shield rides on its own ring of air tubes, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want Matched Propagation with four conductors\u003c\/strong\u003e — the star-quad cancels induced noise, so the Clear line's timing fix arrives with a quieter layout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the CE XLR's latch holds it in the jack, and its brass body and silver contacts resist corrosion, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Clear Cygnus XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-cygnus-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Cygnus RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Clear Cygnus from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/preamplifiers\" style=\"color:#8a5a2b;\"\u003ePreamplifiers\u003c\/a\u003e\u003c\/strong\u003e — source to preamp, preamp to amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is air-tube suspension?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTwo rings of hollow tubes. The inner ring holds each conductor mostly in air. The outer ring, scaled 1.618 times larger, holds the shield away from the conductors.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CE XLR connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's own XLR plug, its standard balanced termination on the Crosslink through Clear Cygnus. High-copper, non-magnetic brass body, silver-plated contacts, hand soldered in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Clear Cygnus?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-reflection-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Reflection XLR\u003c\/a\u003e is the next rung. It moves to the CG XLR plug in a copper-colored finish, a suspended air-core twisted pair, and two composite shields.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Clear Cygnus is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, shielding, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"2.0 Meter \/ Pair \/ New","offer_id":45980595814573,"sku":"NEW-CRCLCYIC-2-PR-XLXL","price":1700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLCYIC_XLR_01_2024__08564.1720715482.1280.1280_5e171a98-cbc1-403d-bea1-a84acc665835.jpg?v=1778141900"},{"product_id":"cardas-audio-clear-cygnus-interconnect-cable-5-0-meter-xlr-to-xlr-pair","title":"Cardas Audio Clear Cygnus Interconnect Cable - 5.0 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eClear Cygnus Borrows the Flagship's Suspension\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Clear Cygnus takes the air-tube suspension of the Cardas flagship, the Clear Beyond, and builds a more economical version of it. Cardas says so in as many words. It replaced the Clear Light in the line. Each cable is hand terminated in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eAir Tubes Inside Air Tubes\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Cardas Grade 1 copper, 99.9999% pure, in Litz form with each strand enamel coated. Each is a Matched Propagation conductor wound on a Kevlar core, with strand sizes stepped in Golden Ratio proportions. Four conductors run at 25.5 AWG.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFour Conductors, a Composite Shield, and a Golden Ratio Gap\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe four conductors sit in a star-quad, each inside an anti-static LDPE air tube. Carbon-impregnated PTFE tape binds the group. Around that, a second ring of PTFE air tubes, scaled 1.618 times larger than the core tubes, holds the shield away from the conductors.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe shield is a composite of tinned copper and magnet wire. A double layer of PTFE tape jackets the conductors, and an ultra-soft extruded TPR jacket finishes the cable at 9.76 mm across. The 1.618 spacing is the Golden Ratio again, applied to the gap rather than the strands.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CE XLR, at the Top of Its Range\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eClear Cygnus is the last Cardas interconnect to carry the CE XLR before the line moves to the reference CG XLR. The CE XLR is machined from high-copper, non-magnetic brass with silver-plated contacts, and Cardas solders it to the cable by hand in Bandon, Oregon.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the flagship's suspension in a normal rack\u003c\/strong\u003e — the Cygnus carries a more economical version of the Clear Beyond's geometry at 9.76 mm, so the idea fits without the bulk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies and routers\u003c\/strong\u003e — the composite shield rides on its own ring of air tubes, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want Matched Propagation with four conductors\u003c\/strong\u003e — the star-quad cancels induced noise, so the Clear line's timing fix arrives with a quieter layout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the CE XLR's latch holds it in the jack, and its brass body and silver contacts resist corrosion, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Clear Cygnus XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-cygnus-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Cygnus RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Clear Cygnus from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/preamplifiers\" style=\"color:#8a5a2b;\"\u003ePreamplifiers\u003c\/a\u003e\u003c\/strong\u003e — source to preamp, preamp to amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is air-tube suspension?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTwo rings of hollow tubes. The inner ring holds each conductor mostly in air. The outer ring, scaled 1.618 times larger, holds the shield away from the conductors.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CE XLR connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's own XLR plug, its standard balanced termination on the Crosslink through Clear Cygnus. High-copper, non-magnetic brass body, silver-plated contacts, hand soldered in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Clear Cygnus?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-reflection-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Reflection XLR\u003c\/a\u003e is the next rung. It moves to the CG XLR plug in a copper-colored finish, a suspended air-core twisted pair, and two composite shields.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Clear Cygnus is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, shielding, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"5.0 Meter \/ Pair \/ New","offer_id":45980600467629,"sku":"NEW-CRCLCYIC-5-PR-XLXL","price":3500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLCYIC_XLR_01_2024__95455.1720717023.1280.1280_8a3d3f24-d486-4f0e-ba30-29e57255a698.jpg?v=1778099500"},{"product_id":"analysis-plus-black-coaxial-digital-cable-black-2-0-meter-rca-to-rca","title":"Analysis Plus Black Coaxial Digital Cable - Black - 2.0 Meter - RCA to RCA","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eBlack Digital Is Analysis Plus's 75-Ohm Coax at a Fair Price\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's Black Digital is the company's entry coaxial digital cable. It uses a braided oval signal conductor with a braided outer shield, mated to what Analysis Plus calls a true 75-ohm solder-less RCA connector. A low-loss dielectric and 100% shield coverage make, in its words, a great cable at a great price.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eA Braided Oval Conductor Inside a Braided Shield\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus builds the signal conductor as a braided oval, its patented hollow oval shape, rather than a round wire. A second braid around it forms the shield and the return path. The company says the shield covers 100% of the conductor, so radio and electrical noise stay out.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eA Low-Loss Dielectric and a Solder-Less 75-Ohm Plug\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eBetween conductor and shield sits a low-loss dielectric. At each end Analysis Plus fits a true 75-ohm RCA connector that is crimped rather than soldered, so the impedance stays matched right through the plug. The company lists the same cable with BNC plugs as well.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe RCA Plugs, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eBlack Digital ends in a non-locking RCA plug at each end, which Analysis Plus calls a true 75-ohm solder-less connector. RCA is the single-pin plug on the coaxial digital output of most CD players, streamers and DACs. Analysis Plus does not publish the plug's plating, so we do not claim it.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Digital Cable Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are replacing the cable that came in the box\u003c\/strong\u003e — Black Digital adds a true 75-ohm plug and a fully shielded braid for little money, so the first step is easy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour CD player or streamer has a coaxial output\u003c\/strong\u003e — the RCA plugs fit the orange coax socket on most sources and DACs, so no adapter is needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the hollow oval at the lowest price\u003c\/strong\u003e — this is the least expensive Analysis Plus cable with the patented conductor shape, so the technology arrives here\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour rack is crowded with power supplies\u003c\/strong\u003e — the braided shield covers 100% of the conductor, so noise has no gap to enter through\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour gear has BNC or AES\/EBU sockets\u003c\/strong\u003e — an RCA plug will not fit them. Call us and we will match the plug\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003ePlug one end into the coaxial digital output of your CD player, transport or streamer and the other into the coaxial digital input of your DAC or receiver. Then choose that input on the DAC and let it lock to the signal.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA digital cable is one link in a digital chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — the receiving end of the link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/cd-players-and-transports\" style=\"color:#8a5a2b;\"\u003eCD Players and Transports\u003c\/a\u003e\u003c\/strong\u003e — the classic coaxial source\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/music-streamers\" style=\"color:#8a5a2b;\"\u003eMusic Streamers\u003c\/a\u003e\u003c\/strong\u003e — a streamer with a digital output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/power-cables\" style=\"color:#8a5a2b;\"\u003ePower Cables\u003c\/a\u003e\u003c\/strong\u003e — clean power at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the hollow oval design?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's patented conductor shape. Instead of a round bundle, the braided conductor forms a hollow oval, which the company says spreads current more evenly across the strands than a round or rectangular conductor.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy a solder-less plug?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus crimps the true 75-ohm RCA onto the cable instead of soldering it. It says the connector keeps the 75-ohm impedance intact through the plug, where a soldered joint can disturb it.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Analysis Plus give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOne year against mechanical defects, from the date of purchase, on cables sold as new. Keep your proof of purchase. The warranty is not transferable and does not cover cables that have been altered or misused.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/analysis-plus-digital-crystal-coaxial-digital-cable-1-0-meter-rca-to-rca\" style=\"color:#8a5a2b;\"\u003eAnalysis Plus Digital Crystal\u003c\/a\u003e is the next rung. It moves to Continuous Cast Copper braids in the same hollow oval design, the company's best digital cable.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about digital audio, DACs, or streaming? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Analysis Plus","offers":[{"title":"2.0 Meter \/ New","offer_id":45980602335405,"sku":"NEW-ANBLKDIG-2-RCRC","price":104.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/ANBLKDIG__28858.1725391945.1280.1280.jpg?v=1778091547"},{"product_id":"audioquest-angel-interconnect-cable-2-0-meter-rca-to-rca-pair","title":"AudioQuest Angel Interconnect Cable - 2.0 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eAngel Is the Solid-Silver Top of AudioQuest's Bridges \u0026amp; Falls Series\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAudioQuest's Angel is the most refined cable in the Bridges \u0026amp; Falls series and the only one made of solid silver. It carries both channels in one jacket and runs the silver inside FEP air tubes. It adds the 72-volt Dielectric-Bias System, and the plugs are silver over pure Red Copper.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eSolid Perfect-Surface Silver Conductors\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe wires are solid Perfect-Surface Silver, which AudioQuest calls PSS. Silver conducts better than copper. AudioQuest says the smooth skin cuts distortion from grain boundaries and helps the cable drain radio noise evenly. Solid wire also removes strand interaction.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFEP Air-Tubes and the Dielectric-Bias System\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe positive wire runs inside an FEP Air-Tube, so the metal barely touches its insulation. AudioQuest gives the negative leg a lossy insulation on purpose, saying the two do different jobs. The DBS pack holds a steady 72 volts across the insulation so it behaves the same at every level. An RF Trap keeps noise out.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAround the cable is a three-layer shield with a carbon layer. AudioQuest calls it Carbon-Based 3-Layer Noise-Dissipation. An ordinary shield drains radio noise into the ground, and AudioQuest says that dirties the reference the signal is measured against. The carbon layers soak up the noise first.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Direct-Silver Plated Red Copper Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAngel ends in a Direct-Silver Plated plug. The body is pure Red Copper, AudioQuest's purest grade. The silver goes straight onto the copper with no nickel underneath, and AudioQuest says nickel causes distortion. The plug is cold welded to the wire. There is no solder in the path.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe layout is AudioQuest's Asymmetrical Double-Balanced Geometry, built for RCA use. The ground and the shield are kept apart. The ground path gets a lower impedance than the signal path, which AudioQuest says makes for a richer, quieter sound.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAlexander Aschenbrunner reviewed the RCA version for Germany's \u003cem\u003eFIDELITY\u003c\/em\u003e in September 2024 and heard a cable that was \"extremely quiet\" and praised its \"completely uninterrupted reproduction of all frequency ranges.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHe called the sound \"remarkably clean, precise\" and wrote that \"voices are reproduced extremely authentically.\" Only the music played, he found, with the speakers seeming to vanish.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want solid silver\u003c\/strong\u003e — Angel is the only solid-silver cable in the series, so the metal matches AudioQuest's flagships\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou listen for quiet and precision\u003c\/strong\u003e — \u003cem\u003eFIDELITY\u003c\/em\u003e heard an extremely quiet, precise cable, so the stage reaches back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpace behind the rack is tight\u003c\/strong\u003e — one slim cable carries both channels, so it bends where a pair will not\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want silver from wire to contact\u003c\/strong\u003e — solid silver meets Direct-Silver plugs over Red Copper, so the metal never changes at the end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour left and right jacks sit far apart\u003c\/strong\u003e — both channels share one jacket here. For mono amps or a wide rack, call us and we will suggest a two-cable option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Angel from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each plug straight on until it seats. Pull it off by the barrel, never by the cable. Leave the DBS pack attached; it needs no switch.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the DBS pack on the cable?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAudioQuest's 72-volt Dielectric-Bias System. A small battery pack holds a steady voltage across the insulation. AudioQuest says this makes the insulation behave the same at every level. An RF Trap keeps the pack from feeding radio noise into the wire.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is Direct-Silver plating?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eSilver plated straight onto the copper plug body. There is no nickel layer underneath. AudioQuest says nickel causes distortion, so it leaves it out.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs this one cable or two?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOne. AudioQuest's Bridges \u0026amp; Falls cables carry both channels inside a single jacket. There are two plugs at each end and one lead to route behind the rack.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy silver wires?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eSilver conducts better than copper. AudioQuest says its solid Perfect-Surface Silver cuts distortion from grain boundaries and drains radio noise evenly across the band.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does AudioQuest give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA limited lifetime warranty to the original owner, for cables bought from an authorized US dealer. AudioQuest will repair or replace a defective cable that has not been abused. Keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from Angel?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAngel is the top of our AudioQuest RCA range. Ready to go further? Call us and we will talk through the options.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, solid-core cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AudioQuest","offers":[{"title":"2.0 Meter \/ New","offer_id":45980607447213,"sku":"NEW-AQAN-2-RCRC","price":1799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/aqanrr-large__89231.1689623242.1280.1280_cb934408-f2d3-448a-a735-dc0e9d004ac8.jpg?v=1778099645"},{"product_id":"audioquest-angel-interconnect-cable-5-0-meter-rca-to-rca-pair","title":"AudioQuest Angel Interconnect Cable - 5.0 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eAngel Is the Solid-Silver Top of AudioQuest's Bridges \u0026amp; Falls Series\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAudioQuest's Angel is the most refined cable in the Bridges \u0026amp; Falls series and the only one made of solid silver. It carries both channels in one jacket and runs the silver inside FEP air tubes. It adds the 72-volt Dielectric-Bias System, and the plugs are silver over pure Red Copper.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eSolid Perfect-Surface Silver Conductors\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe wires are solid Perfect-Surface Silver, which AudioQuest calls PSS. Silver conducts better than copper. AudioQuest says the smooth skin cuts distortion from grain boundaries and helps the cable drain radio noise evenly. Solid wire also removes strand interaction.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFEP Air-Tubes and the Dielectric-Bias System\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe positive wire runs inside an FEP Air-Tube, so the metal barely touches its insulation. AudioQuest gives the negative leg a lossy insulation on purpose, saying the two do different jobs. The DBS pack holds a steady 72 volts across the insulation so it behaves the same at every level. An RF Trap keeps noise out.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAround the cable is a three-layer shield with a carbon layer. AudioQuest calls it Carbon-Based 3-Layer Noise-Dissipation. An ordinary shield drains radio noise into the ground, and AudioQuest says that dirties the reference the signal is measured against. The carbon layers soak up the noise first.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Direct-Silver Plated Red Copper Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAngel ends in a Direct-Silver Plated plug. The body is pure Red Copper, AudioQuest's purest grade. The silver goes straight onto the copper with no nickel underneath, and AudioQuest says nickel causes distortion. The plug is cold welded to the wire. There is no solder in the path.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe layout is AudioQuest's Asymmetrical Double-Balanced Geometry, built for RCA use. The ground and the shield are kept apart. The ground path gets a lower impedance than the signal path, which AudioQuest says makes for a richer, quieter sound.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAlexander Aschenbrunner reviewed the RCA version for Germany's \u003cem\u003eFIDELITY\u003c\/em\u003e in September 2024 and heard a cable that was \"extremely quiet\" and praised its \"completely uninterrupted reproduction of all frequency ranges.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHe called the sound \"remarkably clean, precise\" and wrote that \"voices are reproduced extremely authentically.\" Only the music played, he found, with the speakers seeming to vanish.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want solid silver\u003c\/strong\u003e — Angel is the only solid-silver cable in the series, so the metal matches AudioQuest's flagships\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou listen for quiet and precision\u003c\/strong\u003e — \u003cem\u003eFIDELITY\u003c\/em\u003e heard an extremely quiet, precise cable, so the stage reaches back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpace behind the rack is tight\u003c\/strong\u003e — one slim cable carries both channels, so it bends where a pair will not\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want silver from wire to contact\u003c\/strong\u003e — solid silver meets Direct-Silver plugs over Red Copper, so the metal never changes at the end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour left and right jacks sit far apart\u003c\/strong\u003e — both channels share one jacket here. For mono amps or a wide rack, call us and we will suggest a two-cable option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Angel from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each plug straight on until it seats. Pull it off by the barrel, never by the cable. Leave the DBS pack attached; it needs no switch.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the DBS pack on the cable?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAudioQuest's 72-volt Dielectric-Bias System. A small battery pack holds a steady voltage across the insulation. AudioQuest says this makes the insulation behave the same at every level. An RF Trap keeps the pack from feeding radio noise into the wire.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is Direct-Silver plating?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eSilver plated straight onto the copper plug body. There is no nickel layer underneath. AudioQuest says nickel causes distortion, so it leaves it out.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs this one cable or two?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOne. AudioQuest's Bridges \u0026amp; Falls cables carry both channels inside a single jacket. There are two plugs at each end and one lead to route behind the rack.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy silver wires?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eSilver conducts better than copper. AudioQuest says its solid Perfect-Surface Silver cuts distortion from grain boundaries and drains radio noise evenly across the band.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does AudioQuest give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA limited lifetime warranty to the original owner, for cables bought from an authorized US dealer. AudioQuest will repair or replace a defective cable that has not been abused. Keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from Angel?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAngel is the top of our AudioQuest RCA range. Ready to go further? Call us and we will talk through the options.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, solid-core cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AudioQuest","offers":[{"title":"5.0 Meter \/ New","offer_id":45980616622253,"sku":"NEW-AQAN-5-RCRC","price":3299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/aqanrr-large__62016.1689623245.1280.1280_89cc111c-f9b5-481d-8cde-1ebe3b9e3d39.jpg?v=1778099670"},{"product_id":"cardas-audio-clear-interconnect-cable-6-0-meter-xlr-to-xlr-pair","title":"Cardas Audio Clear Interconnect Cable - 6.0 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eClear Is the Cable the Rest of the Cardas Line Points To\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Clear is the interconnect Cardas designed for reference systems in acoustically neutral rooms. The company describes it as completely neutral and transparent, with superb dynamics, extension and speed. It says the Clear works in long or short runs alike. This is the Rev.1 version. It is hand terminated in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree Conductors in a Triangle\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThree conductors at 25.5 AWG sit in an equilateral triad, a triangle rather than a pair or a square. Each is a Matched Propagation conductor on a Kevlar core, built from Cardas Grade 1 copper, 99.9999% pure, in Litz form with every strand enamel coated.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eStrands Down to 41 Gauge, Suspended in Air\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe individual strands run from 41 AWG to 39 AWG, and their sizes step in Golden Ratio proportions. Each conductor wears an ultra-thin extruded PTFE jacket and sits inside an anti-static LDPE air tube. Carbon-impregnated PTFE tape binds the three.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA second ring of PTFE air tubes, scaled 1.618 times larger than the core tubes, holds the composite shield of tinned copper and magnet wire away from the signal. An ultra-soft extruded TPR jacket finishes the cable. It measures 11.43 mm across.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CG XLR, Machined for the Flagship Tier\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eClear ends in the Cardas CG XLR, the company's reference cable-mount XLR. It is a three-piece threaded design in high-copper, non-magnetic brass, with silver contacts under a rhodium flash. A fourth solder pin bonds the shell to the body, and a red or black O-ring marks the channel.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eStereophile\u003c\/em\u003e lists the Clear Rev.1 in its 2025 Recommended Components, noting that with it in his system its reviewer \"gained significant measures of detail and transparency.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eThe Absolute Sound\u003c\/em\u003e named the Clear an Editors' Choice in 2013, and \u003cem\u003eStereophile\u003c\/em\u003e has kept it in Recommended Components from the 2018 edition through the 2025 edition.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou have a reference system in a treated room\u003c\/strong\u003e — Cardas designed the Clear for exactly that, so the cable is chosen for the room you built\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need a long run\u003c\/strong\u003e — Cardas says the Clear works in long or short runs alike, so separates across the room are not a compromise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour rack radiates\u003c\/strong\u003e — the composite shield rides on its own ring of air tubes, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the reference plug\u003c\/strong\u003e — the CG XLR is machined brass with rhodium-over-silver contacts in a threaded three-piece body, so it grips and resists corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Clear XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Clear from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/preamplifiers\" style=\"color:#8a5a2b;\"\u003ePreamplifiers\u003c\/a\u003e\u003c\/strong\u003e — source to preamp, preamp to amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/stereo-amplifiers\" style=\"color:#8a5a2b;\"\u003eStereo Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the power amp end of a separates system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to preamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/cd-players-and-transports\" style=\"color:#8a5a2b;\"\u003eCD Players \u0026amp; Transports\u003c\/a\u003e\u003c\/strong\u003e — disc player to preamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the equilateral triad?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThree conductors arranged as a triangle with equal sides. Cardas uses it in the Clear in place of a twisted pair or a star-quad.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CG XLR connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's reference cable-mount XLR. A three-piece threaded brass body, silver contacts under a rhodium flash, a fourth solder pin to bond the shell, and a red or black O-ring to mark the channel.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does Rev.1 mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe current version of the Clear. Cardas lists the interconnect as Rev 1, and \u003cem\u003eStereophile\u003c\/em\u003e notes the revision applies to both the RCA and the XLR versions.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Clear?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-beyond-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Beyond XLR\u003c\/a\u003e is the top of the line. It moves to four conductors in a star-quad, strands down to 47 gauge, and a 13 mm body with a CG XLR redesigned to fit it.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Clear is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, reference systems, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"New","offer_id":45980618129581,"sku":"NEW-CRCLEIC-6-PR-XLXL","price":11700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLEIC_XRL-LARGE__06452.1691710102.386.513.jpg_c_1_2526_gl_1_1umejmq__ga_MTUxMTkxMzIwLjE2OTE0MjA5MjE.__ga_WS2VZYPC6G_MTY5MjU3MzIxNi40MS4xLjE2OTI1NzMzNDcuNi4wLjA__20945.1692573435.128_873042fc-525d-4419-abd5-7252cd9f4b09.jpg?v=1778143028"},{"product_id":"kimber-kable-tonik-interconnect-cable-7-0-meter-rca-to-rca-pair","title":"Kimber Kable Tonik Interconnect Cable - 7.0 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eTonik Is the First Rung of the Kimber Ladder\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Tonik is the least expensive interconnect Kimber makes. It is built the way every Kimber cable is built: three conductors braided by hand in Ogden, Utah. Kimber names it after the first note of a scale. The aim is a base that is accurate before it is anything else.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree Copper Conductors in a Tri-Braid\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Kimber's VariStrand copper. Each is a bundle of strands in more than one gauge. Kimber says the mix of gauges spreads the signal across the bundle. The three are woven in Kimber's tri-braid field geometry. The braid is the noise control; there is no separate shield.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eA PE Dielectric and a Plug Kimber Machines Itself\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber insulates the Tonik with what it calls a special-recipe PE, or polyethylene, dielectric. Kimber publishes the result: 52 pF of capacitance and 0.772 µH of inductance per meter of cable. Low capacitance keeps a line-level signal intact over a longer run.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Ultratike Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTonik ends in the Ultratike, Kimber's own entry RCA plug. Kimber machines it from solid metal stock. It carries the Ultraplate contact surface. Kimber says that surface gives high conductivity and durability, and works with any plating on your gear. Inside is a solid Teflon dielectric and a split center pin that grips the jack.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eArt Dudley, writing in \u003cem\u003eStereophile\u003c\/em\u003e on November 23, 2011, found the Toniks \"offered clarity without brightness, and reasonably good amounts of color, texture, and touch.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe Tonik still appears in the 2026 edition of \u003cem\u003eStereophile\u003c\/em\u003e’s Recommended Components, which lists the cables its writers have used and stand behind.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are replacing the cable that came in the box\u003c\/strong\u003e — the Tonik is built by hand in Utah from Kimber's own copper, so the first upgrade is a real one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the tri-braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that grips\u003c\/strong\u003e — the Ultratike's split center pin seats firmly on the jack, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou may move up later\u003c\/strong\u003e — every Kimber interconnect above the Tonik uses the same braid idea, so you will know the house sound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — the Tonik is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-tonik-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Tonik XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Tonik from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each Ultratike plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/turntables\" style=\"color:#8a5a2b;\"\u003eTurntables\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the Ultratike connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber's own entry RCA plug. It is machined from solid metal, uses Kimber's Ultraplate contact surface, and has a solid Teflon dielectric and a split center pin.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of copper strands in more than one gauge. Kimber uses this stranding in every interconnect it makes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs the Tonik shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber relies on the tri-braid geometry to reject noise, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Tonik?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-pbj-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eKimber PBJ\u003c\/a\u003e is the next rung. It keeps the tri-braid and moves to a fluorocarbon dielectric and the Ultraplate plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"New","offer_id":45980619276461,"sku":"NEW-KKTON-7-PR-RCRC","price":252.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKTON_RCRC_01_2023__16254.1692300797.1280.1280_4b05298b-0bfb-4338-8868-c652be22ba04.jpg?v=1778138863"},{"product_id":"kimber-kable-tonik-interconnect-cable-4-0-meter-rca-to-rca-pair","title":"Kimber Kable Tonik Interconnect Cable - 4.0 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eTonik Is the First Rung of the Kimber Ladder\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Tonik is the least expensive interconnect Kimber makes. It is built the way every Kimber cable is built: three conductors braided by hand in Ogden, Utah. Kimber names it after the first note of a scale. The aim is a base that is accurate before it is anything else.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree Copper Conductors in a Tri-Braid\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Kimber's VariStrand copper. Each is a bundle of strands in more than one gauge. Kimber says the mix of gauges spreads the signal across the bundle. The three are woven in Kimber's tri-braid field geometry. The braid is the noise control; there is no separate shield.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eA PE Dielectric and a Plug Kimber Machines Itself\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber insulates the Tonik with what it calls a special-recipe PE, or polyethylene, dielectric. Kimber publishes the result: 52 pF of capacitance and 0.772 µH of inductance per meter of cable. Low capacitance keeps a line-level signal intact over a longer run.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Ultratike Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTonik ends in the Ultratike, Kimber's own entry RCA plug. Kimber machines it from solid metal stock. It carries the Ultraplate contact surface. Kimber says that surface gives high conductivity and durability, and works with any plating on your gear. Inside is a solid Teflon dielectric and a split center pin that grips the jack.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eArt Dudley, writing in \u003cem\u003eStereophile\u003c\/em\u003e on November 23, 2011, found the Toniks \"offered clarity without brightness, and reasonably good amounts of color, texture, and touch.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe Tonik still appears in the 2026 edition of \u003cem\u003eStereophile\u003c\/em\u003e’s Recommended Components, which lists the cables its writers have used and stand behind.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are replacing the cable that came in the box\u003c\/strong\u003e — the Tonik is built by hand in Utah from Kimber's own copper, so the first upgrade is a real one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the tri-braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that grips\u003c\/strong\u003e — the Ultratike's split center pin seats firmly on the jack, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou may move up later\u003c\/strong\u003e — every Kimber interconnect above the Tonik uses the same braid idea, so you will know the house sound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — the Tonik is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-tonik-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Tonik XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Tonik from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each Ultratike plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/turntables\" style=\"color:#8a5a2b;\"\u003eTurntables\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the Ultratike connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber's own entry RCA plug. It is machined from solid metal, uses Kimber's Ultraplate contact surface, and has a solid Teflon dielectric and a split center pin.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of copper strands in more than one gauge. Kimber uses this stranding in every interconnect it makes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs the Tonik shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber relies on the tri-braid geometry to reject noise, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Tonik?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-pbj-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eKimber PBJ\u003c\/a\u003e is the next rung. It keeps the tri-braid and moves to a fluorocarbon dielectric and the Ultraplate plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"New","offer_id":45980619800749,"sku":"NEW-KKTON-4-PR-RCRC","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKTON_RCRC_01_2023__71557.1692300772.1280.1280_15243410-0114-431f-83a5-c34965958ea7.jpg?v=1778138852"},{"product_id":"kimber-kable-hero-hb-interconnect-cable-3-0-meter-wbt-102cu-rcas-pair","title":"Kimber Kable Hero HB Interconnect Cable - 3.0 Meter - WBT 102Cu RCA's - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eHero HB Weaves Copper and Silver in Kimber's Four-Wire Braid\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Hero HB is a four-wire Kimber braid made from two metals. Kimber uses hyper-pure copper and hyper-pure silver for the conductors and places the cable in its Classic Series. Like every Kimber cable, it is braided and terminated by hand in Ogden, Utah.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eFour Copper and Silver Conductors in a GyroQuadratic Braid\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber names the geometry GyroQuadratic. Four VariStrand conductors, in hyper-pure copper and silver, weave around one another. Kimber says the weave rejects noise without a shield. Each conductor is a bundle of strands in more than one gauge.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eDual Fluorocarbon Insulation and Hand-Soldered Ends\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber uses what it calls dual fluorocarbon insulating technology, two layers of fluorocarbon over each conductor. It publishes the result: 73.3 pF of capacitance, 0.382 µH of inductance and 0.0388 ohms of resistance per meter. The plugs are soldered on by hand under nitrogen.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber has braided cable in Ogden, Utah, since 1979, and every Hero HB is woven there. The nitrogen used at the soldering bench keeps air away from the hot joint, so the solder stays bright and the connection stays clean. No publication has reviewed Hero HB, so we describe only what Kimber states.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe WBT-0102 Cu Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHero HB ends in the WBT-0102 Cu, a WBT Topline plug. It keeps WBT's nextgen design and adds a brass sleeve of higher conductivity on the ground side. WBT says that matters most for phono outputs. The contacts are pure oxygen-free copper. WBT rates it at 75 ohms to 200 MHz.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe body is brass under a barrel finished in black piano lacquer. The central contact sits in Ultramid and the ground contact in Dyneon, two low-loss plastics. WBT's collet clamp locks the plug onto the jack and takes cable up to 9 mm across.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want silver in the braid without going all-silver\u003c\/strong\u003e — Hero HB mixes hyper-pure copper and silver in one four-wire weave, so you get both metals in a single cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the GyroQuadratic braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a hand-built cable\u003c\/strong\u003e — Kimber braids and solders each Hero HB by hand in Utah, under nitrogen, so every joint is clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou run a turntable\u003c\/strong\u003e — the WBT-0102 Cu's higher-conductivity ground sleeve is built for phono-level signals, so hum and pickup stay low\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — Hero HB is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-hero-hb-interconnect-balanced-cable-0-5-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Hero HB XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Hero HB from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Slide each WBT plug onto the jack, then turn the barrel to tighten the clamp. Loosen it before you pull the plug off.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the WBT-0102 Cu connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA WBT Topline RCA plug. It uses WBT's nextgen contact design with pure oxygen-free copper contacts, a higher-conductivity brass ground sleeve for shielding, a black lacquered brass barrel and a twist-to-lock collet clamp.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow does the WBT-0102 differ from WBT's other nextgen plugs?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWBT gives the 0102 a brass ground sleeve of higher conductivity for better shielding. Everything else follows the nextgen design of a single, low-mass signal conductor.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of strands in more than one gauge. Kimber uses this stranding in every interconnect it makes and says the mix of gauges spreads the signal across the bundle.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs Hero HB shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber relies on the GyroQuadratic braid to reject noise, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is GyroQuadratic geometry?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber's name for the way the four wires of Hero HB weave around one another. Kimber pairs it with VariStrand conductors and two layers of fluorocarbon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from Hero HB with WBT-0102 Cu plugs?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-hero-ag-interconnect-cable-1-0-meter-ultraplate-black-rcas-pair\" style=\"color:#8a5a2b;\"\u003eKimber Hero AG\u003c\/a\u003e is the next rung. It moves to four conductors of hyper-pure silver in the same GyroQuadratic braid.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"3.0 Meter \/ New","offer_id":45980621930669,"sku":"NEW-KKHEHB102-3-PR-RCRC","price":2860.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/kkhehb102__37760.1691584718.1280.1280_c97f786e-da3c-4bf8-a63f-10db8c7f47c8.jpg?v=1778136639"},{"product_id":"cardas-audio-clear-cygnus-interconnect-cable-4-0-meter-xlr-to-xlr-pair","title":"Cardas Audio Clear Cygnus Interconnect Cable - 4.0 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eClear Cygnus Borrows the Flagship's Suspension\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Clear Cygnus takes the air-tube suspension of the Cardas flagship, the Clear Beyond, and builds a more economical version of it. Cardas says so in as many words. It replaced the Clear Light in the line. Each cable is hand terminated in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eAir Tubes Inside Air Tubes\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Cardas Grade 1 copper, 99.9999% pure, in Litz form with each strand enamel coated. Each is a Matched Propagation conductor wound on a Kevlar core, with strand sizes stepped in Golden Ratio proportions. Four conductors run at 25.5 AWG.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFour Conductors, a Composite Shield, and a Golden Ratio Gap\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe four conductors sit in a star-quad, each inside an anti-static LDPE air tube. Carbon-impregnated PTFE tape binds the group. Around that, a second ring of PTFE air tubes, scaled 1.618 times larger than the core tubes, holds the shield away from the conductors.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe shield is a composite of tinned copper and magnet wire. A double layer of PTFE tape jackets the conductors, and an ultra-soft extruded TPR jacket finishes the cable at 9.76 mm across. The 1.618 spacing is the Golden Ratio again, applied to the gap rather than the strands.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CE XLR, at the Top of Its Range\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eClear Cygnus is the last Cardas interconnect to carry the CE XLR before the line moves to the reference CG XLR. The CE XLR is machined from high-copper, non-magnetic brass with silver-plated contacts, and Cardas solders it to the cable by hand in Bandon, Oregon.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the flagship's suspension in a normal rack\u003c\/strong\u003e — the Cygnus carries a more economical version of the Clear Beyond's geometry at 9.76 mm, so the idea fits without the bulk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies and routers\u003c\/strong\u003e — the composite shield rides on its own ring of air tubes, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want Matched Propagation with four conductors\u003c\/strong\u003e — the star-quad cancels induced noise, so the Clear line's timing fix arrives with a quieter layout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the CE XLR's latch holds it in the jack, and its brass body and silver contacts resist corrosion, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Clear Cygnus XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-cygnus-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Cygnus RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Clear Cygnus from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/preamplifiers\" style=\"color:#8a5a2b;\"\u003ePreamplifiers\u003c\/a\u003e\u003c\/strong\u003e — source to preamp, preamp to amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is air-tube suspension?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTwo rings of hollow tubes. The inner ring holds each conductor mostly in air. The outer ring, scaled 1.618 times larger, holds the shield away from the conductors.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CE XLR connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's own XLR plug, its standard balanced termination on the Crosslink through Clear Cygnus. High-copper, non-magnetic brass body, silver-plated contacts, hand soldered in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Clear Cygnus?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-reflection-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Reflection XLR\u003c\/a\u003e is the next rung. It moves to the CG XLR plug in a copper-colored finish, a suspended air-core twisted pair, and two composite shields.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Clear Cygnus is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, shielding, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"4.0 Meter \/ Pair \/ New","offer_id":45980625240237,"sku":"NEW-CRCLCYIC-4-PR-XLXL","price":2900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLCYIC_XLR_01_2024__08793.1720716352.1280.1280_fe26f6b4-fbf3-46a1-b20d-2504e74d3d29.jpg?v=1778141894"},{"product_id":"cardas-audio-clear-sky-interconnect-cable-2-5-meter-xlr-to-xlr-pair","title":"Cardas Audio Clear Sky Interconnect Cable - 2.5 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eClear Sky Is Where Matched Propagation Starts\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Clear Sky is the entry to the Cardas Clear line, and the first Cardas interconnect to use Matched Propagation conductors. Cardas describes it as transparent, dynamic and neutral. The copper is Grade 1, 99.9999% pure, built as Litz wire around a Kevlar core.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy Cardas Slows the Conductor Down\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eMatched Propagation is George Cardas's answer to a timing problem. A signal moves through copper faster than a charge moves through the insulation around it. Cardas says the lag smears low-level detail. Rather than add a network, Cardas sets the twist rate of each strand layer so the conductor's speed matches the dielectric's.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eAir Tubes, Thin Tape and a Shield Held at a Distance\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTwo conductors at 23.5 AWG form a shielded twisted pair. Each sits in a non-conductive poly-e air tube, and the pair is bound in an ultra-thin FEP tape. A second layer of compressed air tubes then holds the tin-plated copper braided shield away from the conductors.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn extruded alcryn rubber jacket finishes the cable at 9.27 mm across. Cardas builds the Clear Sky for long or short runs alike, and says it suits any high-end system. Each cable is hand terminated in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CE XLR, Built by Cardas\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eClear Sky ends in the Cardas CE XLR, the company's own XLR plug and its standard balanced termination here. The body is machined high-copper, non-magnetic brass and the contacts are silver plated. Cardas solders it to the cable by hand in Bandon, Oregon.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the Clear line's core idea at its entry point\u003c\/strong\u003e — Matched Propagation conductors are what the whole Clear range is built on, so you are buying the principle itself\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies and routers\u003c\/strong\u003e — the braided shield rides on air tubes, off the conductors, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need a long run\u003c\/strong\u003e — Cardas says Clear Sky is excellent in long or short lengths, so a source across the room is not a compromise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the CE XLR's latch holds it in the jack, and its brass body and silver contacts resist corrosion, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Clear Sky XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-sky-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Sky RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Clear Sky from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/music-streamers\" style=\"color:#8a5a2b;\"\u003eMusic Streamers\u003c\/a\u003e\u003c\/strong\u003e — streamer output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is Matched Propagation?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's conductor design. It sets the twist rate of each strand layer so the signal in the copper travels at the same speed as the charge in the insulation. Cardas says that keeps low-level detail from smearing.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CE XLR connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's own XLR plug, its standard balanced termination on the Crosslink through Clear Cygnus. High-copper, non-magnetic brass body, silver-plated contacts, hand soldered in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Clear Sky?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-cygnus-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Cygnus XLR\u003c\/a\u003e is the next rung. It moves to four conductors in a star-quad, adds a second layer of PTFE air tubes, and keeps the CE XLR plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Clear Sky is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, cable geometry, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"2.5 Meter \/ Pair \/ New","offer_id":45980628189357,"sku":"NEW-CRCLSKYIC-2.5-PR-XLXL","price":1215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLSKYIC_XLR-large__67794.1695390196.1280.1280_9de1504b-dd71-4646-b6cf-6eaba2f950bd.jpg?v=1778094757"},{"product_id":"cardas-audio-parsec-interconnect-cable-1-0-meter-xlr-to-xlr-single","title":"Cardas Audio Parsec Interconnect Cable - 1.0 Meter - XLR to XLR - Single","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eThe Parsec Puts Cardas's Air Tubes Within Reach\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Parsec is the cable Cardas calls its runaway favorite for best value. It takes two ideas from the company's Clear line, a Kevlar core in each conductor and polyethylene air tubes around them, and puts them in an everyday interconnect. Cardas describes it as neutral with a hint of warmth on top.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eA Kevlar Core Inside Every Conductor\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Cardas Grade 1 copper, 99.9999% pure, built as Litz wire with each strand sealed in clear SPN enamel. Each is wound around a Kevlar core. Strand sizes step up in Golden Ratio proportions from that core outward. Two conductors run at 23.5 AWG.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eTwo Conductors, Twisted, and Suspended in Air\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe two conductors form a shielded twisted pair. Each sits inside a poly-e air tube, so the conductor rests mostly in air rather than plastic, and the pair is bound in carbon-impregnated FEP tape. Air holds very little charge. That is the reason Cardas goes to the trouble.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA second layer of compressed poly-e air tubes holds the tin-plated copper braided shield and the extruded alcryn rubber jacket away from the conductors. That gap is deliberate. The shield rejects radio and electrical noise from a distance instead of pressing on the signal path. The cable measures 9.14 mm across.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CE XLR at the End\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eParsec ends in the Cardas CE XLR, the company's own XLR plug and its standard balanced termination here. The body is machined high-copper, non-magnetic brass and the contacts are silver plated. Cardas solders it to the cable by hand in Bandon, Oregon.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a first step into Cardas's Clear-line construction\u003c\/strong\u003e — Kevlar-core conductors and air-tube insulation arrive here, so the parts that define the dearer Cardas cables are in your rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near switching power supplies\u003c\/strong\u003e — the braided shield rides on air tubes, off the conductors, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou swap gear often\u003c\/strong\u003e — the CE XLR latches into the jack and its silver contacts resist wear, so every reconnection seats clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a cable that dresses easily\u003c\/strong\u003e — the alcryn rubber jacket stays flexible at 9.14 mm, so it bends around a shelf edge without a fight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Parsec XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-parsec-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Parsec RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Parsec from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/power-cables\" style=\"color:#8a5a2b;\"\u003ePower Cables\u003c\/a\u003e\u003c\/strong\u003e — clean power at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat are air tubes?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHollow polyethylene tubes around each conductor, so the copper rests mostly in air. A second set of compressed tubes holds the shield and jacket away from the conductors.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CE XLR connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's own XLR plug, its standard balanced termination on the Crosslink through Clear Cygnus. High-copper, non-magnetic brass body, silver-plated contacts, hand soldered in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Parsec?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-sky-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Sky XLR\u003c\/a\u003e is the next rung and the entry to the Clear line. It adds Cardas's Matched Propagation conductors and keeps the CE XLR plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Parsec is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, dielectrics, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"1.0 Meter \/ Single \/ New","offer_id":45980629860525,"sku":"NEW-CRPARIC-1-SIN-XLXL","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/crparic_xlr-large__39227.1692103752.1280.1280_2315092f-c91d-4c52-9d6a-fec1a464ad9d.jpg?v=1778141437"},{"product_id":"kimber-kable-cadence-subwoofer-cable-4-5-meter-black-ultraplate-rca-to-rca","title":"Kimber Kable Cadence Subwoofer Cable - 4.5 Meter - Black Ultraplate RCA to RCA","description":"\u003ch4\u003eTight, Well-Defined Bass Impact\u003c\/h4\u003e\r\n\r\n\u003cp align=\"justify\"\u003eCadence is a high-performance subwoofer interconnect from Kimber Kable. It is specially engineered to excel at the low frequencies using a stranded copper coaxial design. The copper shielding helps eliminate common noise problems in subwoofers. The durable PVC jacket is ideal for custom installations. \u003c\/p\u003e\r\n\r\n\u003cp align=\"justify\"\u003eWith Cadence, you'll enjoy excellent clarity and dynamics with the tight, well-defined bass impact that a realistic movie and multi-channel music experience requires. \u003c\/p\u003e\r\n\r\n\u003cp align=\"justify\"\u003eThe Ultraplate connector is precision machined out of solid metal stock. It features a solid Teflon dielectric and split center pin for enhanced performance. The Ultraplate surface provides high conductivity, great durability, and is compatible with all other plating surfaces. \u003c\/p\u003e","brand":"Kimber Kable","offers":[{"title":"New","offer_id":45981146448045,"sku":"NEW-KKCADULT-4.5","price":281.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKCADULT__91099.1689623331.1280.1280_728eda13-118b-4b1d-bdf4-1277c2daf551.jpg?v=1778118483"},{"product_id":"cardas-audio-parsec-interconnect-cable-0-5-meter-rca-to-rca-pair","title":"Cardas Audio Parsec Interconnect Cable - 0.5 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eThe Parsec Puts Cardas's Air Tubes Within Reach\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Parsec is the cable Cardas calls its runaway favorite for best value. It takes two ideas from the company's Clear line, a Kevlar core in each conductor and polyethylene air tubes around them, and puts them in an everyday interconnect. Cardas describes it as neutral with a hint of warmth on top.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eA Kevlar Core Inside Every Conductor\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Cardas Grade 1 copper, 99.9999% pure, built as Litz wire with each strand sealed in clear SPN enamel. Each is wound around a Kevlar core. Strand sizes step up in Golden Ratio proportions from that core outward. Two conductors run at 23.5 AWG.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eTwo Conductors, Twisted, and Suspended in Air\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe two conductors form a shielded twisted pair. Each sits inside a poly-e air tube, so the conductor rests mostly in air rather than plastic, and the pair is bound in carbon-impregnated FEP tape. Air holds very little charge. That is the reason Cardas goes to the trouble.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA second layer of compressed poly-e air tubes holds the tin-plated copper braided shield and the extruded alcryn rubber jacket away from the conductors. That gap is deliberate. The shield rejects radio and electrical noise from a distance instead of pressing on the signal path. The cable measures 9.14 mm across.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe GRMO Plug at the End\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eParsec ends in the Cardas GRMO RCA plug. Cardas machines it from high-copper, non-magnetic brass. The contacts are silver plated under a rhodium flash, and a gold-plated cover screws on. Each plug is soldered to the wire by hand in Bandon, Oregon.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a first step into Cardas's Clear-line construction\u003c\/strong\u003e — Kevlar-core conductors and air-tube insulation arrive here, so the parts that define the dearer Cardas cables are in your rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near switching power supplies\u003c\/strong\u003e — the braided shield rides on air tubes, off the conductors, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou swap gear often\u003c\/strong\u003e — the GRMO's machined body and rhodium-over-silver contacts grip and resist wear, so every reconnection seats clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a cable that dresses easily\u003c\/strong\u003e — the alcryn rubber jacket stays flexible at 9.14 mm, so it bends around a shelf edge without a fight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — the Parsec is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-parsec-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Parsec XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Parsec from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each GRMO plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/power-cables\" style=\"color:#8a5a2b;\"\u003ePower Cables\u003c\/a\u003e\u003c\/strong\u003e — clean power at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat are air tubes?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHollow polyethylene tubes around each conductor, so the copper rests mostly in air. A second set of compressed tubes holds the shield and jacket away from the conductors.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the GRMO connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's own machined RCA plug. Brass body, silver contacts with a rhodium flash, and a gold cover that screws on over the cable.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Parsec?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-sky-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Sky\u003c\/a\u003e is the next rung and the entry to the Clear line. It adds Cardas's Matched Propagation conductors and keeps the GRMO plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Parsec is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, dielectrics, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"0.5 Meter \/ Pair \/ New","offer_id":45981146710189,"sku":"NEW-CRPARIC-0.5-PR-RCRC","price":370.0,"currency_code":"USD","in_stock":true},{"title":"0.5 Meter \/ Pair \/ Demo","offer_id":45981146742957,"sku":"DEMO-CRPARIC-0.5-PR-RCRC","price":299.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRPARIC_RCRC_01_2023__67705.1695150612.1280.1280.jpg?v=1778141463"},{"product_id":"kimber-kable-carbon-ci8-interconnect-cable-0-75-meter-wbt-0114cu-rca-to-rca-pair","title":"Kimber Kable Carbon CI8 Interconnect Cable - 0.75 Meter - WBT 0114Cu RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eCarbon Is Kimber's Eight-Wire Helix\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Carbon interconnect is the newest design in the Kimber line. It is the first to build a carbon polymer into the cable. Eight conductors wind in a helix and run unbroken into the plugs. It is built by hand in Ogden, Utah.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eEight 19.5 AWG Copper Conductors\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is 19.5 AWG VariStrand copper. The eight are laid in what Kimber calls an eight-wire counter-opposed helix. Kimber describes a seamless braided transition into the left and right plugs, so the geometry holds right up to the connector.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eA Carbon Polymer That Drains Static\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber wraps the conductors in a carbon polymer that bleeds off static charge. Under it is a low-loss fluorocarbon dielectric. Kimber says the carbon layer cuts noise caused by movement and evens out the voltage gradient inside the insulation. The stated aim is a natural sound that is neither bright nor dark.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe WBT-0114 Cu Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCarbon ends in the WBT-0114 Cu, a plug WBT builds under its nextgen name. The signal contacts are pure oxygen-free copper. A brass sleeve tied to the ground contact provides the shielding, and WBT rates the plug at 75 ohms to 400 MHz. The metal parts are a copper alloy plated in 24-carat gold.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe barrel locks on with WBT's patented collet clamp, a two-section sleeve in a ruthenium finish that works like the chuck on a drill. Twist the barrel and the plug tightens onto the jack. The center pin is slotted so it springs against the socket.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eMartin Colloms, writing in \u003cem\u003eStereophile\u003c\/em\u003e on July 17, 2025, summed up the Carbon this way: \"My first impression: neutrality. I heard no sins of commission or omission.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003ePaul Miller, in a \u003cem\u003eHi-Fi News\u003c\/em\u003e review first published January 1, 2026, found that \"Carbon seemingly brings composure, a quiet calm and dignity to performances.\" His lab found each conductor made of seven strands in four different diameters.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a cable that stays out of the way\u003c\/strong\u003e — reviewers describe the Carbon as neutral, so what you hear is the recording\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour rack is prone to microphony\u003c\/strong\u003e — the carbon layer is built to drain static and damp mechanically induced noise, so footfalls and vibration stay out of the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the counter-opposed helix cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the WBT-0114 Cu's collet clamp tightens onto the jack, so the connection cannot work loose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — Carbon is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-carbon-ci8-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Carbon XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Carbon from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Slide each WBT plug onto the jack, then turn the barrel to tighten the clamp. Loosen it before you pull the plug off.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the WBT-0114 Cu connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA WBT nextgen RCA plug with pure oxygen-free copper contacts, a shielding brass sleeve on the ground side, gold-plated copper-alloy metalwork and a twist-to-lock collet clamp.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs WBT 114 the same plug as WBT-0114 Cu?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eYes. Audio Advisor titles write it as WBT 114, WBT 114Cu or WBT 0114Cu. They are all the copper version of WBT's 0114 nextgen plug.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of strands in more than one gauge. Kimber uses this stranding in every interconnect it makes and says the mix of gauges spreads the signal across the bundle.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs Carbon shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eNot in the conventional sense. Kimber relies on the eight-wire helix to reject induced noise and on the carbon polymer to dissipate static charge.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does the carbon layer do?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber calls it an electrostatically dissipative carbon polymer. It bleeds off static and, Kimber says, reduces mechanically induced noise and evens out the voltage gradient in the dielectric.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from Carbon with WBT-0114 Cu plugs?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-silver-streak-interconnect-cable-1-0-meter-wbt-0114cu-rcas-pair\" style=\"color:#8a5a2b;\"\u003eKimber Silver Streak with WBT-0114 Cu plugs\u003c\/a\u003e is the next rung. It moves to Kimber's Summit Series and adds a silver conductor to two copper ones.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"0.75 Meter \/ New","offer_id":45981147332781,"sku":"NEW-KKCAR114-0.75-PR-RCRC","price":565.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKCAR114_01-Large__60584.1692285940.1280.1280_b6eac252-0dfc-4f6e-9260-40e3b327c750.jpg?v=1778137627"},{"product_id":"cardas-audio-parsec-interconnect-cable-4-0-meter-xlr-to-xlr-pair","title":"Cardas Audio Parsec Interconnect Cable - 4.0 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eThe Parsec Puts Cardas's Air Tubes Within Reach\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Parsec is the cable Cardas calls its runaway favorite for best value. It takes two ideas from the company's Clear line, a Kevlar core in each conductor and polyethylene air tubes around them, and puts them in an everyday interconnect. Cardas describes it as neutral with a hint of warmth on top.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eA Kevlar Core Inside Every Conductor\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Cardas Grade 1 copper, 99.9999% pure, built as Litz wire with each strand sealed in clear SPN enamel. Each is wound around a Kevlar core. Strand sizes step up in Golden Ratio proportions from that core outward. Two conductors run at 23.5 AWG.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eTwo Conductors, Twisted, and Suspended in Air\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe two conductors form a shielded twisted pair. Each sits inside a poly-e air tube, so the conductor rests mostly in air rather than plastic, and the pair is bound in carbon-impregnated FEP tape. Air holds very little charge. That is the reason Cardas goes to the trouble.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA second layer of compressed poly-e air tubes holds the tin-plated copper braided shield and the extruded alcryn rubber jacket away from the conductors. That gap is deliberate. The shield rejects radio and electrical noise from a distance instead of pressing on the signal path. The cable measures 9.14 mm across.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CE XLR at the End\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eParsec ends in the Cardas CE XLR, the company's own XLR plug and its standard balanced termination here. The body is machined high-copper, non-magnetic brass and the contacts are silver plated. Cardas solders it to the cable by hand in Bandon, Oregon.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a first step into Cardas's Clear-line construction\u003c\/strong\u003e — Kevlar-core conductors and air-tube insulation arrive here, so the parts that define the dearer Cardas cables are in your rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near switching power supplies\u003c\/strong\u003e — the braided shield rides on air tubes, off the conductors, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou swap gear often\u003c\/strong\u003e — the CE XLR latches into the jack and its silver contacts resist wear, so every reconnection seats clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a cable that dresses easily\u003c\/strong\u003e — the alcryn rubber jacket stays flexible at 9.14 mm, so it bends around a shelf edge without a fight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Parsec XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-parsec-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Parsec RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Parsec from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/power-cables\" style=\"color:#8a5a2b;\"\u003ePower Cables\u003c\/a\u003e\u003c\/strong\u003e — clean power at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat are air tubes?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHollow polyethylene tubes around each conductor, so the copper rests mostly in air. A second set of compressed tubes holds the shield and jacket away from the conductors.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CE XLR connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's own XLR plug, its standard balanced termination on the Crosslink through Clear Cygnus. High-copper, non-magnetic brass body, silver-plated contacts, hand soldered in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Parsec?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-sky-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Sky XLR\u003c\/a\u003e is the next rung and the entry to the Clear line. It adds Cardas's Matched Propagation conductors and keeps the CE XLR plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Parsec is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, dielectrics, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"4.0 Meter \/ Pair \/ New","offer_id":45981153689773,"sku":"NEW-CRPARIC-4-PR-XLXL","price":1280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/crparic_xlr-large__53786.1692104018.1280.1280_f348a590-b3be-4fcf-a265-66e2f354dabe.jpg?v=1778141406"},{"product_id":"kimber-kable-pbj-interconnect-cable-0-5-meter-xlr-to-xlr-pair","title":"Kimber Kable PBJ Interconnect Cable - 0.5 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003ePBJ Is the Kimber Cable That Made the Braid Famous\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's PBJ has been in the line since the late 1980s. It is three conductors, braided, with no jacket and no shield. Kimber calls the construction simple and elegant. Reviewers have called it a classic. It is still made by hand in Ogden, Utah.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree Hyper-Pure Copper Conductors\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Kimber's VariStrand hyper-pure copper. Each is a bundle of strands in several gauges. The three are woven in Kimber's tri-braid field geometry, the pattern that rejects noise without a shield around it.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eA Fluorocarbon Dielectric You Can See\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor sits in its own extruded fluorocarbon jacket. That is the clear insulation that gives the PBJ its look. For the balanced cable Kimber publishes 45.7 pF of capacitance and 1.01 µH of inductance per meter. Low capacitance keeps a line-level signal intact over a longer run.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Switchcraft XLR Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003ePBJ ends in the plug Kimber fits to its balanced cables: a studio-grade Switchcraft XLR with silver-plated contact pins. Kimber solders it on by hand under nitrogen in Ogden, Utah. The plug latches into the jack and will not pull loose by accident. The silver plating keeps the contact clean.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCorey Greenberg, writing in \u003cem\u003eStereophile\u003c\/em\u003e on July 1, 1993, called the PBJ \"reference-level wire you can actually afford.\" The review helped make the cable a staple of budget systems.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eStephen Mejias, in \u003cem\u003eStereophile\u003c\/em\u003e on June 20, 2012, heard \"an outstanding job of re-creating the performance space.\" The PBJ remains in \u003cem\u003eStereophile\u003c\/em\u003e's 2026 Recommended Components.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the original Kimber braid\u003c\/strong\u003e — the PBJ is the cable the line was built on, so you are buying the reference point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the tri-braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou dress cables in tight spaces\u003c\/strong\u003e — three thin jacketed wires bend where a fat cable will not, so the plugs sit square on the jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the Switchcraft XLR latches into the jack and its silver-plated pins resist tarnish, so the connection stays put\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the PBJ XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-pbj-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eKimber PBJ RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the PBJ from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat XLR connector does Kimber use?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA studio-grade Switchcraft XLR with silver-plated contact pins. Kimber names it on its balanced Tonik, PBJ, Silver Streak, Hero HB and Hero AG. Kimber solders it on by hand under nitrogen.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of copper strands in more than one gauge. Kimber uses this stranding in every interconnect it makes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs the PBJ shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber relies on the tri-braid geometry to reject noise, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the PBJ?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-timbre-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Timbre XLR\u003c\/a\u003e is the next rung. It keeps the three-wire braid and adds a low-loss fluorocarbon dielectric, with the same Switchcraft XLR plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor looks at the PBJ, its braid and its plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/ra8Dfvb-Oj0\" title=\"Kimber Kable PBJ Interconnect – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"0.5 Meter \/ Pair \/ New","offer_id":45981154279597,"sku":"NEW-KKPBBAL-0.5-PR-XLXL","price":138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKPBBAL_XLXL_01_2024__94098.1731348109.1280.1280_21f6f714-7363-4972-a220-5d6dd355859d.jpg?v=1778136753"},{"product_id":"cardas-audio-crosslink-interconnect-cable-0-5-meter-xlr-to-xlr-pair","title":"Cardas Audio Crosslink Interconnect Cable - 0.5 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eCardas Built the Crosslink for Systems Just Getting Started\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Crosslink is the entry to the Cardas interconnect line. Cardas built it for entry-level and mid-level stereo and home theater systems, and describes it as warm and forgiving but still detailed and musical. The copper is Cardas Grade 2, drawn to 99.99% purity.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eGolden Ratio Stranding, in the Entry Cable\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is Litz wire: many fine strands, each coated in a clear SPN enamel so no strand touches its neighbor. Strand sizes step up in Golden Ratio proportions from the center out, a Cardas signature. Two conductors run at 20.5 AWG, and the layers cross at an angle Cardas calls cross-field geometry.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eCotton, Foil Tape and a Spiral Shield\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe two conductors are twisted together around a natural cotton filler and bound in FEP tape. A spiral shield of tin-plated copper wraps the pair to keep radio and electrical noise out. A PVC jacket covers the whole cable. The outside diameter is 7.69 mm, slim enough for a crowded rack.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CE XLR Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCrosslink ends in the Cardas CE XLR, the company's own XLR plug and its standard balanced termination here. The body is machined high-copper, non-magnetic brass and the contacts are silver plated. Cardas solders it to the cable by hand in Bandon, Oregon. The same plug serves every Cardas balanced interconnect up to the Clear Cygnus.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are building a first serious system\u003c\/strong\u003e — a DAC, streamer or phono stage into an amplifier over XLR, with Cardas Litz copper in the path, so the cable is no longer the weak link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour gear lives in a tight rack or cabinet\u003c\/strong\u003e — at 7.69 mm the Crosslink is slim and the PVC jacket flexes, so it routes behind a shelf without straining the jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou run home theater alongside stereo\u003c\/strong\u003e — Cardas built the Crosslink for both, so one cable type covers the sources, the preamp and the surround gear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the CE XLR latches into the jack, and its brass body and silver contacts resist corrosion, so the connection stays put for years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Crosslink XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-crosslink-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Crosslink RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Crosslink from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat copper is in the Crosslink?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Grade 2, 99.99% pure oxygen-free copper, in Litz form with each strand enamel coated. Strand sizes are scaled to the Golden Ratio.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Crosslink?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-iridium-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Iridium XLR\u003c\/a\u003e is the next rung. It moves to Cardas Grade 1 copper at 99.9999% purity and a four-conductor star-quad layout, with the same CE XLR plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through how Cardas builds its cables, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, RCA versus XLR, or cable break-in? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"0.5 Meter \/ Pair \/ New","offer_id":45981158998189,"sku":"NEW-CRCLIC-0.5-PR-XLXL","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLIC_XLXL_01_2024__33859.1717599964.1280.1280_9a3e6f95-6968-433f-92c1-623f1a0fb894.jpg?v=1778153318"},{"product_id":"analysis-plus-solo-crystal-oval-interconnect-cable-1-0-meter-rca-to-rca-single","title":"Analysis Plus Solo Crystal Oval Interconnect Cable - 1.0 Meter - RCA to RCA - Single","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eSolo Crystal Oval Is Analysis Plus's Single-Crystal Copper Interconnect\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's Solo Crystal Oval braids Continuous Cast Copper into the company's hollow oval geometry. Continuous casting draws the copper as one long crystal, so the signal crosses no grain boundaries on the way. Analysis Plus says the design puts nothing in the way of the music. The plugs are the company's non-locking RCAs.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eContinuous Cast Copper in a Hollow Oval Braid\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Continuous Cast Copper, which Analysis Plus also calls solo crystal copper. Ordinary copper is made of many small crystals, and each boundary between them is a small barrier to the signal. Casting the copper as one crystal removes them. The braid is woven into the hollow oval shape for even current flow.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eThe Non-Locking RCA Plug, Explained\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eSolo Crystal Oval ends in Analysis Plus's non-locking gold RCA plug, used on many of the company's cables. It pushes straight onto the jack and pulls straight off, with no barrel to twist, so it suits crowded rear panels. The same cable can be ordered with XLR plugs. Analysis Plus makes its RCA plugs in house.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eMade by Hand in Michigan\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus was founded in 1993 as a scientific research and design company. It builds its cables by hand at its own shop in Flushing, Michigan. The company chose braided conductors because a woven bundle flexes without the stress cracks a solid wire can suffer, and because its weave puts every strand equally close to the return current.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eMarc Mickelson reviewed Solo Crystal Oval for \u003cem\u003eSoundStage!\u003c\/em\u003e in October 2002 and heard cables that sound like \"utterly clear conduits between your components and music.\" He found them \"palpable and fleshy through the midrange, the antithesis of thin or bleached.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHis verdict was plain: \"These are cables with which you can call it quits.\" He noted the detail is abundant, and that some listeners might see that as a sin of commission rather than a virtue.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want clarity without thinness\u003c\/strong\u003e — \u003cem\u003eSoundStage!\u003c\/em\u003e heard utterly clear cables with a full midrange, so detail comes with body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want single-crystal copper\u003c\/strong\u003e — Continuous Cast Copper has no grain boundaries along its length, so the signal crosses none\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour recordings are good\u003c\/strong\u003e — \u003cem\u003eSoundStage!\u003c\/em\u003e found the better the software, the better it sounds with these cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that pushes straight on\u003c\/strong\u003e — the non-locking RCA needs no twist, so crowded panels are easy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — Solo Crystal Oval is single-ended RCA. If both components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/analysis-plus-solo-crystal-oval-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eAnalysis Plus Solo Crystal Oval XLR\u003c\/a\u003e instead. Or call us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Solo Crystal Oval from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the non-locking RCA plug?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's own gold RCA plug, used on many of its cables. It pushes straight onto the jack with no locking barrel, so it suits crowded rear panels and pulls off without a twist.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is Continuous Cast Copper?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCopper drawn as one long crystal instead of many small ones. Analysis Plus calls it solo crystal copper. With no grain boundaries along its length, the company says the signal meets fewer barriers.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the hollow oval design?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's own conductor shape. At high frequencies current crowds to the outside of a wire and bunches unevenly. The oval keeps the outgoing and return paths close, and the hollow center drops the metal that would carry little current.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy braid the conductor?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus says a woven bundle flexes without the stress cracks a solid wire can suffer. Its weave also puts every strand statistically as close to the return current as every other strand.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Analysis Plus give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOne year against mechanical defects, from the date of purchase, on cables sold as new. Keep your proof of purchase. The warranty is not transferable and does not cover cables that have been altered or misused.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/analysis-plus-crystal-apex-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eAnalysis Plus Crystal Apex\u003c\/a\u003e is the next rung. It is built like the flagship Silver Apex, with Pure Crystal Copper in a double-shielded design.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Analysis Plus","offers":[{"title":"1.0 Meter \/ Single \/ New","offer_id":45981162078381,"sku":"NEW-ANCROV-1-SIN-RCRC","price":302.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/ANACROIS_000__04107.1689623271.1280.1280_b771bd5c-4b2e-4170-9db3-459d1a54107f.jpg?v=1778105837"},{"product_id":"analysis-plus-oval-one-interconnect-cable-5-0-meter-rca-to-rca-pair","title":"Analysis Plus Oval One Interconnect Cable - 5.0 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eOval One Is the Entry to Analysis Plus's Hollow Oval Interconnects\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's Oval One is the least expensive RCA cable the Michigan company makes. It uses the same hollow oval conductor idea as the dearer cables. It is handmade and fully shielded. The plugs are 75 ohm RCAs that are pressed onto the wire, not soldered.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eA Braided Hollow Oval Under a Braided Shield\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe signal path is a braided copper conductor woven into Analysis Plus's hollow oval shape. The oval keeps the outgoing and return paths close together, and the hollow center drops metal that carries little current. A braided outer shield gives full coverage, which Analysis Plus says keeps the noise floor low.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eThe Solder-Less 75 Ohm RCA Plug, Explained\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOval One ends in a true 75 ohm RCA plug with a low-loss dielectric. Analysis Plus joins it to the cable by compression contact instead of solder. The company says this spares the insulation the heat that soldering brings. There is no cold solder joint to pass the signal poorly. \u003cem\u003eGoodSound!\u003c\/em\u003e found the plugs gave a tight fit.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eGoodSound!\u003c\/em\u003e reviewed Oval One on March 1, 2002: \"I enjoyed the increased weight and power of the music, along with the system's improved transparency.\" It added that \"everything sounded just a little bit clearer and more refined.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe same review called the gain incremental and said cables like these \"should not be used to compensate for poor-sounding components.\" It found Oval One \"priced reasonably enough that the cost of this upgrade is easy to justify.\"\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are replacing the cable that came in the box\u003c\/strong\u003e — Oval One is handmade and fully shielded, so the first upgrade is a real one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want no solder in the path\u003c\/strong\u003e — the plug is pressed onto the wire, so there is no solder joint to go cold\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the braided shield covers the whole cable, so hum from the shelf stays out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou may move up later\u003c\/strong\u003e — every Analysis Plus cable above this one uses the same hollow oval idea, so each step feels familiar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou expect a big change\u003c\/strong\u003e — \u003cem\u003eGoodSound!\u003c\/em\u003e heard an incremental gain, not a transformation. If your system already has a fault, fix the component first. Or call us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Oval One from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/music-streamers\" style=\"color:#8a5a2b;\"\u003eMusic Streamers\u003c\/a\u003e\u003c\/strong\u003e — streamer output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the solder-less 75 ohm RCA plug?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's own RCA plug, rated at 75 ohms with a low-loss dielectric. It is pressed onto the cable by compression contact, so no solder heats the insulation.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the hollow oval design?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's own conductor shape. At high frequencies current crowds to the outside of a wire and bunches unevenly. The oval keeps the outgoing and return paths close, and the hollow center drops the metal that would carry little current.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Analysis Plus give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOne year against mechanical defects, from the date of purchase, on cables sold as new. Keep your proof of purchase. The warranty is not transferable and does not cover cables that have been altered or misused.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/analysis-plus-chocolate-oval-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eAnalysis Plus Chocolate Oval\u003c\/a\u003e is the next rung. It moves to a balanced, in-wall rated cable with Analysis Plus's non-locking RCA plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Analysis Plus","offers":[{"title":"5.0 Meter \/ Pair \/ New","offer_id":45981162143917,"sku":"NEW-ANOV1-5-PR-RCRC","price":241.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/ANOV1_RCRC_02_2024__45911.1710436647.1280.1280.jpg?v=1778122388"},{"product_id":"audioquest-yukon-interconnect-cable-0-5-meter-xlr-to-xlr-single","title":"AudioQuest Yukon Interconnect Cable - 0.5 Meter - XLR to XLR - Single","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eYukon Is the Top of AudioQuest's Rivers Series\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAudioQuest's Yukon is the most refined cable in the Rivers series. It is a two-cable design, one lead per channel. It takes the Mackenzie recipe one step further: the copper moves out of foam and into tubes of air.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eSolid Perfect-Surface Copper+, Direction-Controlled\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe wires are solid Perfect-Surface Copper+, AudioQuest's highest grade of copper, which it calls PSC+. The wire is drawn with an ultra-smooth surface, and AudioQuest says this cuts the distortion caused by grain boundaries. Solid wire also removes strand interaction.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe wire is also direction-controlled. AudioQuest says drawn wire has a grain with a direction. It listens to every batch, picks the direction, and marks the jacket with arrows. Point the arrows at the amplifier and noise drains where AudioQuest intends.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePolyethylene Air-Tubes and Triple-Balanced Geometry\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach wire runs inside a Polyethylene Air-Tube. The wire touches almost nothing but air. Air stores almost no signal energy, and AudioQuest says this leaves far less of the out-of-focus effect that solid insulation causes.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe layout is what AudioQuest calls Triple-Balanced. A third wire carries the ground on its own. The shield never has to double as a signal path. AudioQuest says both signal legs then travel equally clean routes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Hanging-Silver Purple Copper XLR Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eYukon ends in AudioQuest's Hanging-Silver XLR plug. The body is pure Purple Copper. The parts hang in the plating bath instead of tumbling, which AudioQuest says gives a more even coat of silver. The plug is cold welded to the wire, so there is no solder in the path. It latches into the jack.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAround the cable is a three-layer shield with a carbon layer. AudioQuest calls it Carbon-Based 3-Layer Noise-Dissipation. An ordinary shield drains radio noise into the ground, and AudioQuest says that dirties the reference the signal is measured against. The carbon layers soak up the noise first.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eChristiaan Punter reviewed the RCA version for \u003cem\u003eHiFi-Advice\u003c\/em\u003e on December 9, 2015 and called Yukon \"very open and airy. It really digs out the smallest details, without ever sounding harsh.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHe summed it up as a \"very natural sounding cable\" with \"a very open, airy, and refined sound.\" The upper bass, he noted, could carry more substance.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou listen for the smallest details\u003c\/strong\u003e — \u003cem\u003eHiFi-Advice\u003c\/em\u003e heard Yukon dig them out without harshness, so nothing is buried\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour left and right jacks sit far apart\u003c\/strong\u003e — Yukon is two separate cables, so mono amplifiers and wide racks are no problem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the carbon shield and a separate ground wire drain noise, so the shelf stays quiet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want silver at the contact and a plug that locks\u003c\/strong\u003e — the Hanging-Silver XLR over pure Purple Copper latches into the jack, so the last inch is silver and the connection stays put\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Yukon XLR will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/audioquest-yukon-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eAudioQuest Yukon RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Yukon from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Point the arrows on the jacket toward the amplifier. Line up the pins and push until the latch clicks.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat XLR plug does Yukon use?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe XLR version of AudioQuest's Hanging-Silver plug: silver over a body of pure Purple Copper, cold welded to the wire so no solder sits in the path.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does Triple-Balanced mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe cable has three wires: positive, negative and a separate ground. AudioQuest says this keeps the shield out of the signal path, so both signal legs travel equally clean routes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy air tubes instead of foam?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAudioQuest says any solid next to a wire stores some signal energy and releases it late as distortion. Air stores almost none, so a tube of air keeps the signal cleaner than the foam in Mackenzie.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhich way do the arrows point?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eToward the component that receives the signal, normally the amplifier or preamp. AudioQuest sets the direction of the wire and says the arrows let noise drain the right way.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does AudioQuest give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA limited lifetime warranty to the original owner, for cables bought from an authorized US dealer. AudioQuest will repair or replace a defective cable that has not been abused. Keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/audioquest-black-beauty-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eAudioQuest Black Beauty XLR\u003c\/a\u003e is the next rung. It moves to AudioQuest's Mythical Creatures family, with ZERO-Tech, a carbon and graphene mesh and Hanging-Silver plugs over Red Copper.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, solid-core cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AudioQuest","offers":[{"title":"0.5 Meter \/ Single \/ New","offer_id":45981168730285,"sku":"NEW-AQYUKON-0.5-SIN-XLXL","price":330.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/aqyukon_xlr-large__82484.1692104628.1280.1280_59ff7124-f206-40cd-962f-179d4dc02705.jpg?v=1778141170"},{"product_id":"kimber-kable-hero-interconnect-cable-5-0-meter-wbt-114-rcas-pair","title":"Kimber Kable Hero Interconnect Cable - 5.0 Meter - WBT 114 RCA's - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eHero Is Kimber's Four-Wire Braid\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Hero is the interconnect Kimber built around four conductors instead of three. It sits in Kimber's Ascent Series and has been a reviewer favorite for many years. Like every Kimber cable, it is braided and terminated by hand in Ogden, Utah.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eFour 19 AWG Copper Conductors in a Quadratic Braid\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is 19 AWG VariStrand copper, a bundle of strands in more than one gauge. The four are woven in what Kimber calls a quadratic braid. Kimber says the braid gives wide bandwidth and noise reduction without the use of shielding.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eVirgin FEP Insulation and Hand-Soldered Ends\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber insulates each conductor with virgin FEP, a fluorocarbon it applies in single and dual layers. It publishes the result: 78 pF of capacitance, 0.385 µH of inductance and 0.037 ohms of resistance per meter. The plugs are soldered on by hand under nitrogen, which keeps the joint clean as it cools.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe WBT-0114 Cu Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHero ends in the WBT-0114 Cu, a plug WBT builds under its nextgen name. The signal contacts are pure oxygen-free copper. A brass sleeve tied to the ground contact provides the shielding, and WBT rates the plug at 75 ohms to 400 MHz. The metal parts are a copper alloy plated in 24-carat gold.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe barrel locks on with WBT's patented collet clamp, a two-section sleeve in a ruthenium finish that works like the chuck on a drill. Twist the barrel and the plug tightens onto the jack. The center pin is slotted so it springs against the socket.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eThe Absolute Sound\u003c\/em\u003e staff, in the 2017 Editors' Choice list published April 6, 2017, wrote that \"Hero's bass lives up to its name, prodigious in amplitude and definition.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eJason Kennedy, reviewing for \u003cem\u003ehi-fi+\u003c\/em\u003e on January 17, 2018, found that \"as soon as you drop it into the system the timing comes into focus.\" \u003cem\u003eStereophile\u003c\/em\u003e’s 2026 Recommended Components calls Hero the \"strong, silent type\" among cables.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want more than a three-wire cable gives\u003c\/strong\u003e — Kimber designed Hero's four-wire braid for wide bandwidth, so the whole range gets through\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the quadratic braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou value bass weight\u003c\/strong\u003e — \u003cem\u003eThe Absolute Sound\u003c\/em\u003e singled out Hero's low end for its size and definition, so kick drums land\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the WBT-0114 Cu's collet clamp tightens onto the jack, so the connection cannot work loose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — Hero is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-hero-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Hero XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Hero from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Slide each WBT plug onto the jack, then turn the barrel to tighten the clamp. Loosen it before you pull the plug off.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the WBT-0114 Cu connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA WBT nextgen RCA plug with pure oxygen-free copper contacts, a shielding brass sleeve on the ground side, gold-plated copper-alloy metalwork and a twist-to-lock collet clamp.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs WBT 114 the same plug as WBT-0114 Cu?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eYes. Audio Advisor titles write it as WBT 114, WBT 114Cu or WBT 0114Cu. They are all the copper version of WBT's 0114 nextgen plug.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of strands in more than one gauge. Kimber uses this stranding in every interconnect it makes and says the mix of gauges spreads the signal across the bundle.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs Hero shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber says the four-wire quadratic braid provides the noise reduction, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy four conductors instead of three?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHero has four 19 AWG conductors where Kimber's three-wire cables have three. Kimber says the four-wire quadratic braid provides wide bandwidth and noise reduction without shielding.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from Hero with WBT-0114 Cu plugs?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-silver-streak-interconnect-cable-1-0-meter-pair-ultraplate-black-rca-to-rca\" style=\"color:#8a5a2b;\"\u003eKimber Silver Streak\u003c\/a\u003e is the next rung. It moves to Kimber's Summit Series and adds a silver conductor to two copper ones.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor looks at the Hero braid and its plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/p9tconXVYVI\" title=\"Kimber Kable Hero Interconnect with WBT 0144's – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eThe balanced version of the same cable, for a look at how Kimber terminates it.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/mm7bNwYYE3w\" title=\"Kimber Kable Hero Interconnect with XLR'S – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"5.0 Meter \/ Pair \/ New","offer_id":45981169287341,"sku":"NEW-KKHE114-5-PR-RCRC","price":900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKHE114__19346.1692298732.1280.1280_42a539e6-bdf8-4211-896d-708863f8636d.jpg?v=1778138194"},{"product_id":"kimber-kable-tonik-interconnect-cable-5-0-meter-rca-to-rca-pair","title":"Kimber Kable Tonik Interconnect Cable - 5.0 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eTonik Is the First Rung of the Kimber Ladder\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Tonik is the least expensive interconnect Kimber makes. It is built the way every Kimber cable is built: three conductors braided by hand in Ogden, Utah. Kimber names it after the first note of a scale. The aim is a base that is accurate before it is anything else.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree Copper Conductors in a Tri-Braid\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Kimber's VariStrand copper. Each is a bundle of strands in more than one gauge. Kimber says the mix of gauges spreads the signal across the bundle. The three are woven in Kimber's tri-braid field geometry. The braid is the noise control; there is no separate shield.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eA PE Dielectric and a Plug Kimber Machines Itself\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber insulates the Tonik with what it calls a special-recipe PE, or polyethylene, dielectric. Kimber publishes the result: 52 pF of capacitance and 0.772 µH of inductance per meter of cable. Low capacitance keeps a line-level signal intact over a longer run.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Ultratike Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTonik ends in the Ultratike, Kimber's own entry RCA plug. Kimber machines it from solid metal stock. It carries the Ultraplate contact surface. Kimber says that surface gives high conductivity and durability, and works with any plating on your gear. Inside is a solid Teflon dielectric and a split center pin that grips the jack.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eArt Dudley, writing in \u003cem\u003eStereophile\u003c\/em\u003e on November 23, 2011, found the Toniks \"offered clarity without brightness, and reasonably good amounts of color, texture, and touch.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe Tonik still appears in the 2026 edition of \u003cem\u003eStereophile\u003c\/em\u003e’s Recommended Components, which lists the cables its writers have used and stand behind.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are replacing the cable that came in the box\u003c\/strong\u003e — the Tonik is built by hand in Utah from Kimber's own copper, so the first upgrade is a real one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the tri-braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that grips\u003c\/strong\u003e — the Ultratike's split center pin seats firmly on the jack, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou may move up later\u003c\/strong\u003e — every Kimber interconnect above the Tonik uses the same braid idea, so you will know the house sound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — the Tonik is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-tonik-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Tonik XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Tonik from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each Ultratike plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/turntables\" style=\"color:#8a5a2b;\"\u003eTurntables\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the Ultratike connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber's own entry RCA plug. It is machined from solid metal, uses Kimber's Ultraplate contact surface, and has a solid Teflon dielectric and a split center pin.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of copper strands in more than one gauge. Kimber uses this stranding in every interconnect it makes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs the Tonik shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber relies on the tri-braid geometry to reject noise, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Tonik?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-pbj-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eKimber PBJ\u003c\/a\u003e is the next rung. It keeps the tri-braid and moves to a fluorocarbon dielectric and the Ultraplate plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"New","offer_id":45981175972013,"sku":"NEW-KKTON-5-PR-RCRC","price":204.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKTON_RCRC_01_2023__84907.1692300779.1280.1280_2c792bd1-0237-459e-abba-f532817f9049.jpg?v=1778138855"},{"product_id":"cardas-audio-clear-reflection-interconnect-cable-2-0-meter-xlr-to-xlr-single","title":"Cardas Audio Clear Reflection Interconnect Cable - 2.0 Meter - XLR to XLR - Single","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eClear Reflection Pays Homage to the Golden Reference\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Clear Reflection is the cable Cardas built to bring flagship-level performance to real-world systems. Cardas says it pays homage to the Golden Reference, its long-running classic. It blends the best of the old with the best of the new. It is hand terminated in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eTwo Conductors Suspended in an Air Core\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Cardas Grade 1 copper, 99.9999% pure, in Litz form with every strand enamel coated. Each is a Matched Propagation conductor on a Kevlar core. Two run at 25.5 AWG, twisted together as a suspended air-core pair inside anti-static LDPE air tubes.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eDouble Shields, a Golden Ratio Gap and a Copper-Colored Plug\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCarbon-impregnated PTFE tape binds the pair. A second ring of PTFE air tubes, scaled 1.618 times larger than the core tubes, holds two composite shields of tinned copper and magnet wire away from the conductors. An extruded PFA jacket insulates each conductor. Black ultra-soft TPR covers the cable at 10.66 mm across.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CG XLR-CU, and Why It Is Copper\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eClear Reflection is where the balanced Cardas line moves from the CE XLR to the reference CG XLR. Here it comes in a copper finish Cardas calls the CG XLR-CU. Under the color it is a three-piece threaded brass body. The contacts are silver under a rhodium flash. A fourth solder pin bonds the shell.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas introduced a copper-colored plug for this cable. On the balanced version it is the CG XLR-CU. It matches the black and copper look of the Clear Reflection speaker cable. A full loom reads as one set.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKirk Midtskog, reviewing for \u003cem\u003eThe Absolute Sound\u003c\/em\u003e on August 18, 2015, heard \"commendable levels of apparent speed, dynamic range, and overall resolution.\" He wrote that \"everything sounded organized and clean, without much interstitial noise.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAlan Sircom, in \u003cem\u003ehi-fi+\u003c\/em\u003e on June 27, 2015, put it this way: \"This is a cable that abides by the old Hippocratic Oath; first, do no harm.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eThe Absolute Sound\u003c\/em\u003e went on to recommend the Clear Reflection in its 2016 Buyers Guide to Cables, Power Products, Accessories \u0026amp; Music.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want flagship construction built for a real room\u003c\/strong\u003e — Cardas designed the Reflection for exactly that, so the top of the Clear line arrives at 10.66 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour rack radiates\u003c\/strong\u003e — two composite shields ride on their own ring of air tubes, so noise is rejected twice without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are building a matching loom\u003c\/strong\u003e — the copper-colored CG XLR-CU pairs with the Clear Reflection speaker cable, so the system looks like one decision\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the plug the top of the line uses\u003c\/strong\u003e — the CG XLR is Cardas's reference XLR, fitted from here up, so the termination is the flagship's\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Clear Reflection XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-reflection-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Reflection RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Clear Reflection from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/preamplifiers\" style=\"color:#8a5a2b;\"\u003ePreamplifiers\u003c\/a\u003e\u003c\/strong\u003e — source to preamp, preamp to amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/stereo-amplifiers\" style=\"color:#8a5a2b;\"\u003eStereo Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the power amp end of a separates system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to preamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/power-cables\" style=\"color:#8a5a2b;\"\u003ePower Cables\u003c\/a\u003e\u003c\/strong\u003e — clean power at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CG XLR-CU connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's reference CG XLR in a copper finish. Under the color it is the same plug. Threaded brass body, silver contacts with a rhodium flash, a fourth solder pin to the shell, and an O-ring to mark the channel.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is Matched Propagation?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's conductor design. The twist rate of each strand layer is set so the signal in the copper travels at the same speed as the charge in the insulation. Cardas says that keeps low-level detail intact.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Clear Reflection?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear XLR\u003c\/a\u003e is the next rung. It moves to three conductors in an equilateral triad, with strands drawn down to 41 gauge, and the CG XLR plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Clear Reflection is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, building a matched loom, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"2.0 Meter \/ Single \/ New","offer_id":45981180526765,"sku":"NEW-CRCLRIC-2-SIN-XLXL","price":1300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLRIC_XLXL_01_2024__95150.1714763565.1280.1280_3aa329ed-ff31-464d-b977-0f818930261a.jpg?v=1778141717"},{"product_id":"kimber-kable-cadence-subwoofer-cable-6-0-meter-wbt-0114-rcas","title":"Kimber Kable Cadence Subwoofer Cable - 6.0 Meter - WBT 0114 RCA's","description":"\u003ch3\u003eTight, Well-Defined Bass Impact\u003c\/h3\u003e\r\n\r\n\u003cp align=\"justify\"\u003eCadence is a high-performance subwoofer interconnect from Kimber Kable. It is specially engineered to excel at the low frequencies using a stranded copper coaxial design. The copper shielding helps eliminate common noise problems in subwoofers. The durable PVC jacket is ideal for custom installations. \u003c\/p\u003e\r\n\r\n\u003cp align=\"justify\"\u003eWith Cadence, you'll enjoy excellent clarity and dynamics with the tight, well-defined bass impact that a realistic movie and multi-channel music experience requires. \u003c\/p\u003e\r\n\r\n\u003cp align=\"justify\"\u003eCadence now features high-quality WBT-0114 RCA connectors, featuring contacts that utilize pure OFC Oxygen Free Copper. \u003c\/p\u003e","brand":"Kimber Kable","offers":[{"title":"New","offer_id":45981185933485,"sku":"NEW-KKCAD114-6","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKCAD114__70599.1689623335.1280.1280_94ecd790-9bcc-4e9f-b02a-ecef5ffa6afe.jpg?v=1778118492"},{"product_id":"cardas-audio-clear-interconnect-cable-1-5-meter-xlr-to-xlr-pair","title":"Cardas Audio Clear Interconnect Cable - 1.5 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eClear Is the Cable the Rest of the Cardas Line Points To\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Clear is the interconnect Cardas designed for reference systems in acoustically neutral rooms. The company describes it as completely neutral and transparent, with superb dynamics, extension and speed. It says the Clear works in long or short runs alike. This is the Rev.1 version. It is hand terminated in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree Conductors in a Triangle\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThree conductors at 25.5 AWG sit in an equilateral triad, a triangle rather than a pair or a square. Each is a Matched Propagation conductor on a Kevlar core, built from Cardas Grade 1 copper, 99.9999% pure, in Litz form with every strand enamel coated.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eStrands Down to 41 Gauge, Suspended in Air\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe individual strands run from 41 AWG to 39 AWG, and their sizes step in Golden Ratio proportions. Each conductor wears an ultra-thin extruded PTFE jacket and sits inside an anti-static LDPE air tube. Carbon-impregnated PTFE tape binds the three.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA second ring of PTFE air tubes, scaled 1.618 times larger than the core tubes, holds the composite shield of tinned copper and magnet wire away from the signal. An ultra-soft extruded TPR jacket finishes the cable. It measures 11.43 mm across.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CG XLR, Machined for the Flagship Tier\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eClear ends in the Cardas CG XLR, the company's reference cable-mount XLR. It is a three-piece threaded design in high-copper, non-magnetic brass, with silver contacts under a rhodium flash. A fourth solder pin bonds the shell to the body, and a red or black O-ring marks the channel.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eStereophile\u003c\/em\u003e lists the Clear Rev.1 in its 2025 Recommended Components, noting that with it in his system its reviewer \"gained significant measures of detail and transparency.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eThe Absolute Sound\u003c\/em\u003e named the Clear an Editors' Choice in 2013, and \u003cem\u003eStereophile\u003c\/em\u003e has kept it in Recommended Components from the 2018 edition through the 2025 edition.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou have a reference system in a treated room\u003c\/strong\u003e — Cardas designed the Clear for exactly that, so the cable is chosen for the room you built\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need a long run\u003c\/strong\u003e — Cardas says the Clear works in long or short runs alike, so separates across the room are not a compromise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour rack radiates\u003c\/strong\u003e — the composite shield rides on its own ring of air tubes, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the reference plug\u003c\/strong\u003e — the CG XLR is machined brass with rhodium-over-silver contacts in a threaded three-piece body, so it grips and resists corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Clear XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Clear from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/preamplifiers\" style=\"color:#8a5a2b;\"\u003ePreamplifiers\u003c\/a\u003e\u003c\/strong\u003e — source to preamp, preamp to amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/stereo-amplifiers\" style=\"color:#8a5a2b;\"\u003eStereo Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the power amp end of a separates system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to preamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/cd-players-and-transports\" style=\"color:#8a5a2b;\"\u003eCD Players \u0026amp; Transports\u003c\/a\u003e\u003c\/strong\u003e — disc player to preamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the equilateral triad?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThree conductors arranged as a triangle with equal sides. Cardas uses it in the Clear in place of a twisted pair or a star-quad.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CG XLR connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's reference cable-mount XLR. A three-piece threaded brass body, silver contacts under a rhodium flash, a fourth solder pin to bond the shell, and a red or black O-ring to mark the channel.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does Rev.1 mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe current version of the Clear. Cardas lists the interconnect as Rev 1, and \u003cem\u003eStereophile\u003c\/em\u003e notes the revision applies to both the RCA and the XLR versions.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Clear?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-beyond-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Beyond XLR\u003c\/a\u003e is the top of the line. It moves to four conductors in a star-quad, strands down to 47 gauge, and a 13 mm body with a CG XLR redesigned to fit it.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Clear is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, reference systems, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"1.5 Meter \/ Pair \/ New","offer_id":45981187834029,"sku":"NEW-CRCLEIC-1.5-PR-XLXL","price":3870.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLEIC_XRL-LARGE__06452__62691.1692574394.1280.1280_cd3d7fa0-f8ff-461e-8fa2-282ffb94d4b7.jpg?v=1778142861"},{"product_id":"cardas-audio-clear-cygnus-interconnect-cable-0-5-meter-xlr-to-xlr-single","title":"Cardas Audio Clear Cygnus Interconnect Cable - 0.5 Meter - XLR to XLR - Single","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eClear Cygnus Borrows the Flagship's Suspension\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Clear Cygnus takes the air-tube suspension of the Cardas flagship, the Clear Beyond, and builds a more economical version of it. Cardas says so in as many words. It replaced the Clear Light in the line. Each cable is hand terminated in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eAir Tubes Inside Air Tubes\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Cardas Grade 1 copper, 99.9999% pure, in Litz form with each strand enamel coated. Each is a Matched Propagation conductor wound on a Kevlar core, with strand sizes stepped in Golden Ratio proportions. Four conductors run at 25.5 AWG.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFour Conductors, a Composite Shield, and a Golden Ratio Gap\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe four conductors sit in a star-quad, each inside an anti-static LDPE air tube. Carbon-impregnated PTFE tape binds the group. Around that, a second ring of PTFE air tubes, scaled 1.618 times larger than the core tubes, holds the shield away from the conductors.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe shield is a composite of tinned copper and magnet wire. A double layer of PTFE tape jackets the conductors, and an ultra-soft extruded TPR jacket finishes the cable at 9.76 mm across. The 1.618 spacing is the Golden Ratio again, applied to the gap rather than the strands.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CE XLR, at the Top of Its Range\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eClear Cygnus is the last Cardas interconnect to carry the CE XLR before the line moves to the reference CG XLR. The CE XLR is machined from high-copper, non-magnetic brass with silver-plated contacts, and Cardas solders it to the cable by hand in Bandon, Oregon.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the flagship's suspension in a normal rack\u003c\/strong\u003e — the Cygnus carries a more economical version of the Clear Beyond's geometry at 9.76 mm, so the idea fits without the bulk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies and routers\u003c\/strong\u003e — the composite shield rides on its own ring of air tubes, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want Matched Propagation with four conductors\u003c\/strong\u003e — the star-quad cancels induced noise, so the Clear line's timing fix arrives with a quieter layout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the CE XLR's latch holds it in the jack, and its brass body and silver contacts resist corrosion, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Clear Cygnus XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-cygnus-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Cygnus RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Clear Cygnus from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/preamplifiers\" style=\"color:#8a5a2b;\"\u003ePreamplifiers\u003c\/a\u003e\u003c\/strong\u003e — source to preamp, preamp to amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is air-tube suspension?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTwo rings of hollow tubes. The inner ring holds each conductor mostly in air. The outer ring, scaled 1.618 times larger, holds the shield away from the conductors.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CE XLR connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's own XLR plug, its standard balanced termination on the Crosslink through Clear Cygnus. High-copper, non-magnetic brass body, silver-plated contacts, hand soldered in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Clear Cygnus?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-reflection-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Reflection XLR\u003c\/a\u003e is the next rung. It moves to the CG XLR plug in a copper-colored finish, a suspended air-core twisted pair, and two composite shields.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Clear Cygnus is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, shielding, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"0.5 Meter \/ Single \/ New","offer_id":45981193044141,"sku":"NEW-CRCLCYIC-0.5-SIN-XLXL","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLCYIC_XLR_01_2024__44388.1720718114.1280.1280_41d48bcc-46c3-4dc6-ad4a-800829f7d33d.jpg?v=1778099480"},{"product_id":"cardas-audio-parsec-interconnect-cable-1-0-meter-rca-to-rca-pair","title":"Cardas Audio Parsec Interconnect Cable - 1.0 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eThe Parsec Puts Cardas's Air Tubes Within Reach\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Parsec is the cable Cardas calls its runaway favorite for best value. It takes two ideas from the company's Clear line, a Kevlar core in each conductor and polyethylene air tubes around them, and puts them in an everyday interconnect. Cardas describes it as neutral with a hint of warmth on top.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eA Kevlar Core Inside Every Conductor\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Cardas Grade 1 copper, 99.9999% pure, built as Litz wire with each strand sealed in clear SPN enamel. Each is wound around a Kevlar core. Strand sizes step up in Golden Ratio proportions from that core outward. Two conductors run at 23.5 AWG.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eTwo Conductors, Twisted, and Suspended in Air\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe two conductors form a shielded twisted pair. Each sits inside a poly-e air tube, so the conductor rests mostly in air rather than plastic, and the pair is bound in carbon-impregnated FEP tape. Air holds very little charge. That is the reason Cardas goes to the trouble.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA second layer of compressed poly-e air tubes holds the tin-plated copper braided shield and the extruded alcryn rubber jacket away from the conductors. That gap is deliberate. The shield rejects radio and electrical noise from a distance instead of pressing on the signal path. The cable measures 9.14 mm across.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe GRMO Plug at the End\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eParsec ends in the Cardas GRMO RCA plug. Cardas machines it from high-copper, non-magnetic brass. The contacts are silver plated under a rhodium flash, and a gold-plated cover screws on. Each plug is soldered to the wire by hand in Bandon, Oregon.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a first step into Cardas's Clear-line construction\u003c\/strong\u003e — Kevlar-core conductors and air-tube insulation arrive here, so the parts that define the dearer Cardas cables are in your rack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near switching power supplies\u003c\/strong\u003e — the braided shield rides on air tubes, off the conductors, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou swap gear often\u003c\/strong\u003e — the GRMO's machined body and rhodium-over-silver contacts grip and resist wear, so every reconnection seats clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a cable that dresses easily\u003c\/strong\u003e — the alcryn rubber jacket stays flexible at 9.14 mm, so it bends around a shelf edge without a fight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — the Parsec is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-parsec-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Parsec XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Parsec from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each GRMO plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/power-cables\" style=\"color:#8a5a2b;\"\u003ePower Cables\u003c\/a\u003e\u003c\/strong\u003e — clean power at both ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat are air tubes?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHollow polyethylene tubes around each conductor, so the copper rests mostly in air. A second set of compressed tubes holds the shield and jacket away from the conductors.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the GRMO connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's own machined RCA plug. Brass body, silver contacts with a rhodium flash, and a gold cover that screws on over the cable.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Parsec?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-sky-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Sky\u003c\/a\u003e is the next rung and the entry to the Clear line. It adds Cardas's Matched Propagation conductors and keeps the GRMO plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Parsec is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, dielectrics, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"1.0 Meter \/ Pair \/ New","offer_id":45981193797805,"sku":"NEW-CRPARIC-1-PR-RCRC","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRPARIC_RCRC_01_2023__34453.1695150769.1280.1280.jpg?v=1778141443"},{"product_id":"analysis-plus-copper-oval-interconnect-cable-1-0-meter-rca-to-rca-pair","title":"Analysis Plus Copper Oval Interconnect Cable - 1.0 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eCopper Oval Puts Three Hollow Oval Conductors in a Slim Jacket\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus sells this cable as the Copper Oval-In Micro. It packs three 18 gauge conductors of pure oxygen-free copper into a small cross section. Each is braided into the company's hollow oval shape and insulated with FEP. A shield wraps the signal lines. Analysis Plus calls the result super quiet and extremely neutral.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree 18 Gauge Conductors in FEP\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe three conductors are braided from oxygen-free copper in Analysis Plus's hollow oval geometry. The oval keeps the outgoing and return paths close, and the hollow center drops metal that carries little current. FEP is a fluoropolymer insulation related to Teflon. The micro build keeps the cable slim and easy to route.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eThe Analysis Plus RCA Plug, Explained\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCopper Oval ends in Analysis Plus's own RCA plug. The company makes its RCA connectors in house and sells them on their own as well. The plug pushes straight onto the jack and pulls straight off. The shield ends at the plug, which keeps radio and electrical noise out. The same cable can be ordered with XLR plugs.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eMade by Hand in Michigan\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus was founded in 1993 as a scientific research and design company. It still builds its cables by hand at its own shop in Flushing, Michigan. The company chose braided conductors because a woven bundle flexes without the stress cracks a solid wire can suffer.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eAudiodrom\u003c\/em\u003e reviewed the balanced version on March 6, 2013: \"a friendly and musical animal that is sonically warm, harmonically rich and timbrally saturated.\" It added \"it is not bright, it does not have boomy bass and it is not overdetailed.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe same review was clear about the limits. The reviewer's far dearer reference cable was \"substantially better but also substantially more expensive,\" and Copper Oval scored in the middle of the magazine's scale for detail, air and transparency.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want warmth without mud\u003c\/strong\u003e — \u003cem\u003eAudiodrom\u003c\/em\u003e heard a warm, harmonically rich cable with no boomy bass, so lean systems gain body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpace behind the rack is tight\u003c\/strong\u003e — the micro build is slim, so it bends where thicker cables will not\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the shield around the signal lines keeps radio and electrical noise out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that pushes straight on\u003c\/strong\u003e — Analysis Plus's own RCA plug needs no twist, so crowded panels are easy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the last word in air and detail\u003c\/strong\u003e — \u003cem\u003eAudiodrom\u003c\/em\u003e scored those in the middle of its scale. If resolution is the goal, step up to \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/analysis-plus-solo-crystal-oval-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eAnalysis Plus Solo Crystal Oval\u003c\/a\u003e or call us\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Copper Oval from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat RCA plug does Copper Oval use?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's own RCA plug, made in house. It pushes straight onto the jack. Analysis Plus lists the cable with RCA or balanced XLR plugs.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the hollow oval design?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus's own conductor shape. At high frequencies current crowds to the outside of a wire and bunches unevenly. The oval keeps the outgoing and return paths close, and the hollow center drops the metal that would carry little current.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is FEP?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA fluoropolymer insulation, related to Teflon. Analysis Plus uses it on Copper Oval because it stores little energy from the signal, so less is released late as smear.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy braid the conductor?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAnalysis Plus says a woven bundle flexes without the stress cracks a solid wire can suffer. Its weave also puts every strand statistically as close to the return current as every other strand.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Analysis Plus give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOne year against mechanical defects, from the date of purchase, on cables sold as new. Keep your proof of purchase. The warranty is not transferable and does not cover cables that have been altered or misused.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/analysis-plus-solo-crystal-oval-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eAnalysis Plus Solo Crystal Oval\u003c\/a\u003e is the next rung. It moves to Continuous Cast Copper, drawn as a single long crystal, with the non-locking RCA plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Analysis Plus","offers":[{"title":"1.0 Meter \/ Pair \/ New","offer_id":45981194453165,"sku":"NEW-ANCOOV-1-PR-PRCRC","price":346.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/ANCOOV_01-Large__34246.1710445525.1280.1280_fed6cee4-4c62-4a58-b743-b2f012b62e13.jpg?v=1778134144"},{"product_id":"kimber-kable-timbre-interconnect-cable-1-0-meter-rca-to-rca-single","title":"Kimber Kable Timbre Interconnect Cable - 1.0 Meter - RCA To RCA - Single","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eTimbre Is the Kimber Braid Built for Imaging\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Timbre is a three-wire braided copper interconnect from Kimber's Base Series. Kimber says it delivers deep, holographic imaging and can pop a central performer forward in the soundstage. The name is the word for the character of an instrument's sound. It is made by hand in Ogden, Utah.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree VariStrand Copper Conductors\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Kimber's VariStrand copper, each a bundle of strands in several gauges. The three are woven in Kimber's three-wire braid. Kimber calls the Timbre non-shielded: the braid itself does the noise rejection.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLow-Loss Fluorocarbon and a Hand-Soldered End\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is insulated in a low-loss fluorocarbon dielectric. Kimber publishes the result: 62.1 pF of capacitance and 0.493 µH of inductance per meter. The plugs are soldered on by hand under nitrogen, which Kimber uses to keep the joint clean as it cools.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Ultraplate Black Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTimbre ends in Kimber's Ultraplate Black, the black-finished version of Kimber's own RCA plug. Kimber machines it from solid metal stock. The Ultraplate contact surface, Kimber says, gives high conductivity and durability and works with any plating on your gear. Inside is a solid Teflon dielectric and a split center pin.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRichard Black, reviewing for \u003cem\u003eTechRadar\u003c\/em\u003e on September 2, 2008, gave the Timbre five stars: \"this is one of the best interconnects we know of.\"\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou listen for the placement of voices\u003c\/strong\u003e — Kimber built the Timbre to pull a central performer forward, so the stage has a front and a back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the three-wire braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou dress cables in tight spaces\u003c\/strong\u003e — three thin jacketed wires bend where a fat cable will not, so the plugs sit square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that grips\u003c\/strong\u003e — the Ultraplate Black's split center pin seats firmly, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — the Timbre is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-timbre-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Timbre XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Timbre from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each Ultraplate Black plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/music-streamers\" style=\"color:#8a5a2b;\"\u003eMusic Streamers\u003c\/a\u003e\u003c\/strong\u003e — streamer output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the Ultraplate Black connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber's own RCA plug in a black finish. It is machined from solid metal, uses Kimber's Ultraplate contact surface, and has a solid Teflon dielectric and a split center pin.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of copper strands in more than one gauge. Kimber uses this stranding in every interconnect it makes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs the Timbre shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber calls it non-shielded. The three-wire braid does the noise rejection, which is why there is no outer jacket to hide the weave.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Timbre?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-hero-interconnect-cable-1-0-meter-ultraplate-black-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eKimber Hero\u003c\/a\u003e is the next rung. It moves to four conductors in Kimber's quadratic braid and keeps the Ultraplate Black plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor looks at the Timbre with Kimber's Todd Walldorf.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/-fCkGX2G9hs\" title=\"Kimber Kable Timbre Interconnects – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"1.0 Meter \/ Single \/ New","offer_id":45981199171757,"sku":"NEW-KKTI-1-SIN-RCRC","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKTI_RCRC_01_2024__45677.1718898856.1280.1280_68229667-a911-45a5-aab8-60881ab15981.jpg?v=1778138683"},{"product_id":"audioquest-red-river-interconnect-cable-6-0-meter-xlr-to-xlr-pair","title":"AudioQuest Red River Interconnect Cable - 6.0 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eRed River Is the Rivers-Series Cable Built Around a Third Conductor\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAudioQuest's Red River sits second in the Rivers series, above Chicago. It is a two-cable design, one lead per channel. Solid Perfect-Surface Copper, a dedicated ground wire and cold-welded gold plugs set it apart from the entry cables.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eSolid Perfect-Surface Copper, Direction-Controlled\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe wires are solid Perfect-Surface Copper, which AudioQuest calls PSC. AudioQuest draws the wire with a very smooth surface and says this cuts the distortion caused by grain boundaries. Solid wire also removes strand interaction.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe wire is also direction-controlled. AudioQuest says drawn wire has a grain with a direction. It listens to every batch, picks the direction, and marks the jacket with arrows. Point the arrows at the amplifier and noise drains where AudioQuest intends.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHard-Cell Foam and Triple-Balanced Geometry\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe insulation is Hard-Cell Foam, injected with nitrogen to form air pockets. AudioQuest says the stiff foam holds the signal pair in a fixed geometry along the whole cable. Air stores almost no signal energy, so little is released late as smear.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe layout is what AudioQuest calls Triple-Balanced. A third wire carries the ground on its own. The shield never has to double as a signal path. AudioQuest says both signal legs then travel equally clean routes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Cold-Welded, Gold-Plated XLR Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRed River ends in AudioQuest's cold-welded, gold-plated XLR plug. A press bonds the plug to the wire under high pressure. AudioQuest calls solder \"a common source of distortion.\" The ground shells are stamped rather than machined, so AudioQuest can pick the metal for low distortion. The plug latches into the jack.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAround the cable is AudioQuest's Metal-Layer Noise-Dissipation. AudioQuest says an ordinary shield drains radio noise straight into the equipment's ground and pollutes the reference the signal is measured against. The metal layer absorbs the noise before it gets that far.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eYagiz, reviewing the XLR version for \u003cem\u003eHeadfonia\u003c\/em\u003e on May 26, 2022, found that \"compared to the generics, Red River improves the midrange and tightens the bass response.\" It \"sounds almost as good as the Mackenzie with some differences,\" he wrote.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eWhat Hi-Fi?\u003c\/em\u003e reviewed the RCA version on May 13, 2014 and gave it four stars. What Red River \"lacks in smoothness and subtlety, it makes up for in scale and dynamic scope,\" the magazine wrote.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want scale and drive\u003c\/strong\u003e — \u003cem\u003eWhat Hi-Fi?\u003c\/em\u003e heard a broad soundstage and driving sound, so music fills the room\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour left and right jacks sit far apart\u003c\/strong\u003e — Red River is two separate cables, so mono amplifiers and wide racks are no problem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the separate ground wire and metal shield drain noise, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the cold-welded, gold-plated XLR latches into the jack, so the connection stays put and no solder sits in the path\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Red River XLR will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/audioquest-red-river-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eAudioQuest Red River RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Red River from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Point the arrows on the jacket toward the amplifier. Line up the pins and push until the latch clicks.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat XLR plug does Red River use?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAudioQuest's own gold-plated XLR plug, cold welded to the wire by pressure rather than solder. AudioQuest names solder as a common source of distortion.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does Triple-Balanced mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe cable has three wires: positive, negative and a separate ground. AudioQuest says this keeps the shield out of the signal path, so both signal legs travel equally clean routes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhich way do the arrows point?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eToward the component that receives the signal, normally the amplifier or preamp. AudioQuest sets the direction of the wire and says the arrows let noise drain the right way.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs Red River sold as a pair or a single?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eBoth. Each channel is its own cable, so we list a stereo pair and a single for mono runs and center channels.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does AudioQuest give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA limited lifetime warranty to the original owner, for cables bought from an authorized US dealer. AudioQuest will repair or replace a defective cable that has not been abused. Keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/audioquest-mackenzie-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eAudioQuest Mackenzie XLR\u003c\/a\u003e is the next rung. It moves to Perfect-Surface Copper+, a carbon three-layer shield and Hanging-Silver plugs over pure Purple Copper.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, solid-core cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AudioQuest","offers":[{"title":"New","offer_id":45981200875693,"sku":"NEW-AQRRIVER-6-PR-XLXL","price":698.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/AQRRIVER_XLXL_01_2024__33047.1716305020.1280.1280_65c3421a-9383-4b6e-9303-fd0d08b0ed00.jpg?v=1778140741"},{"product_id":"cardas-audio-clear-cygnus-interconnect-cable-5-0-meter-rca-to-rca-pair","title":"Cardas Audio Clear Cygnus Interconnect Cable - 5.0 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eClear Cygnus Borrows the Flagship's Suspension\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Clear Cygnus takes the air-tube suspension of the Cardas flagship, the Clear Beyond, and builds a more economical version of it. Cardas says so in as many words. It replaced the Clear Light in the line. Each cable is hand terminated in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eAir Tubes Inside Air Tubes\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Cardas Grade 1 copper, 99.9999% pure, in Litz form with each strand enamel coated. Each is a Matched Propagation conductor wound on a Kevlar core, with strand sizes stepped in Golden Ratio proportions. Four conductors run at 25.5 AWG.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFour Conductors, a Composite Shield, and a Golden Ratio Gap\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe four conductors sit in a star-quad, each inside an anti-static LDPE air tube. Carbon-impregnated PTFE tape binds the group. Around that, a second ring of PTFE air tubes, scaled 1.618 times larger than the core tubes, holds the shield away from the conductors.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe shield is a composite of tinned copper and magnet wire. A double layer of PTFE tape jackets the conductors, and an ultra-soft extruded TPR jacket finishes the cable at 9.76 mm across. The 1.618 spacing is the Golden Ratio again, applied to the gap rather than the strands.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe GRMO Plug, at the Top of Its Range\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eClear Cygnus is the last Cardas interconnect to carry the GRMO RCA plug before the line moves to the larger SRCA. The GRMO is machined from high-copper, non-magnetic brass. The contacts are silver plated under a rhodium flash, and a gold-plated cover screws on.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the flagship's suspension in a normal rack\u003c\/strong\u003e — the Cygnus carries a more economical version of the Clear Beyond's geometry at 9.76 mm, so the idea fits without the bulk\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies and routers\u003c\/strong\u003e — the composite shield rides on its own ring of air tubes, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want Matched Propagation with four conductors\u003c\/strong\u003e — the star-quad cancels induced noise, so the Clear line's timing fix arrives with a quieter layout\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that grips\u003c\/strong\u003e — the GRMO's machined brass and rhodium-over-silver contacts seat firmly and resist corrosion, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — the Clear Cygnus is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-cygnus-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Cygnus XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Clear Cygnus from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each GRMO plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/preamplifiers\" style=\"color:#8a5a2b;\"\u003ePreamplifiers\u003c\/a\u003e\u003c\/strong\u003e — source to preamp, preamp to amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is air-tube suspension?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTwo rings of hollow tubes. The inner ring holds each conductor mostly in air. The outer ring, scaled 1.618 times larger, holds the shield away from the conductors.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the GRMO connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's own machined RCA plug. Brass body, silver contacts with a rhodium flash, and a gold cover that screws on over the cable.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Clear Cygnus?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-reflection-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Reflection\u003c\/a\u003e is the next rung. It moves to the SRCA plug in a copper-colored finish, a suspended air-core twisted pair, and two composite shields.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Clear Cygnus is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, shielding, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"5.0 Meter \/ Pair \/ New","offer_id":45981201203373,"sku":"NEW-CRCLCYIC-5-PR-RCRC","price":3500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLCYIC_RCA_01_2024__53261.1720716759.1280.1280_2db386e6-4d6f-44b2-a96a-8b7b254dbe68.jpg?v=1778141880"},{"product_id":"kimber-kable-timbre-interconnect-cable-2-0-meter-rca-to-rca-single","title":"Kimber Kable Timbre Interconnect Cable - 2.0 Meter - RCA to RCA - Single","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eTimbre Is the Kimber Braid Built for Imaging\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Timbre is a three-wire braided copper interconnect from Kimber's Base Series. Kimber says it delivers deep, holographic imaging and can pop a central performer forward in the soundstage. The name is the word for the character of an instrument's sound. It is made by hand in Ogden, Utah.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree VariStrand Copper Conductors\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Kimber's VariStrand copper, each a bundle of strands in several gauges. The three are woven in Kimber's three-wire braid. Kimber calls the Timbre non-shielded: the braid itself does the noise rejection.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLow-Loss Fluorocarbon and a Hand-Soldered End\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is insulated in a low-loss fluorocarbon dielectric. Kimber publishes the result: 62.1 pF of capacitance and 0.493 µH of inductance per meter. The plugs are soldered on by hand under nitrogen, which Kimber uses to keep the joint clean as it cools.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Ultraplate Black Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTimbre ends in Kimber's Ultraplate Black, the black-finished version of Kimber's own RCA plug. Kimber machines it from solid metal stock. The Ultraplate contact surface, Kimber says, gives high conductivity and durability and works with any plating on your gear. Inside is a solid Teflon dielectric and a split center pin.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRichard Black, reviewing for \u003cem\u003eTechRadar\u003c\/em\u003e on September 2, 2008, gave the Timbre five stars: \"this is one of the best interconnects we know of.\"\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou listen for the placement of voices\u003c\/strong\u003e — Kimber built the Timbre to pull a central performer forward, so the stage has a front and a back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the three-wire braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou dress cables in tight spaces\u003c\/strong\u003e — three thin jacketed wires bend where a fat cable will not, so the plugs sit square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that grips\u003c\/strong\u003e — the Ultraplate Black's split center pin seats firmly, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — the Timbre is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-timbre-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Timbre XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Timbre from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each Ultraplate Black plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/music-streamers\" style=\"color:#8a5a2b;\"\u003eMusic Streamers\u003c\/a\u003e\u003c\/strong\u003e — streamer output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the Ultraplate Black connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber's own RCA plug in a black finish. It is machined from solid metal, uses Kimber's Ultraplate contact surface, and has a solid Teflon dielectric and a split center pin.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of copper strands in more than one gauge. Kimber uses this stranding in every interconnect it makes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs the Timbre shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber calls it non-shielded. The three-wire braid does the noise rejection, which is why there is no outer jacket to hide the weave.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Timbre?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-hero-interconnect-cable-1-0-meter-ultraplate-black-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eKimber Hero\u003c\/a\u003e is the next rung. It moves to four conductors in Kimber's quadratic braid and keeps the Ultraplate Black plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor looks at the Timbre with Kimber's Todd Walldorf.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/-fCkGX2G9hs\" title=\"Kimber Kable Timbre Interconnects – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"2.0 Meter \/ Single \/ New","offer_id":45981204742317,"sku":"NEW-KKTI-2-SIN-RCRC","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKTI_RCRC_01_2024__74743.1718899378.1280.1280_9f3cfc7e-f182-4834-802b-1c1d47942266.jpg?v=1778138695"},{"product_id":"kimber-kable-silver-streak-interconnect-cable-4-0-meter-pair-ultraplate-black-rca-to-rca","title":"Kimber Kable Silver Streak Interconnect Cable - 4.0 Meter - Pair - Ultraplate Black RCA to RCA","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eSilver Streak Is Kimber's Copper and Silver Hybrid\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Silver Streak pairs two copper conductors with one silver one. Kimber calls it its first copper and silver hybrid cable and places it in the Summit Series. It has been in the line since the mid-1990s. Like every Kimber cable, it is braided and terminated by hand in Ogden, Utah.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eTwo Strands of Copper, One Strand of Silver\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber names the conductors: two strands of its TCSS copper and one strand of its AGSS silver, each in VariStrand form with mixed gauges. The three are woven in Kimber's three-wire braid. The braid does the noise rejection. There is no separate shield around it.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLow-Loss Fluorocarbon and Hand-Soldered Ends\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor sits in a low-loss fluorocarbon dielectric. Kimber publishes the result: 53 pF of capacitance, 0.75 µH of inductance and 0.061 ohms of resistance per meter. The plugs are soldered on by hand under nitrogen, which keeps the joint clean as it cools.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Ultraplate Black Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eSilver Streak ends in Kimber's Ultraplate Black. It is the black-finished version of Kimber's own RCA plug, machined from solid metal stock. Kimber says the Ultraplate contact surface gives high conductivity and long life. It also works with any plating on your gear. Inside is a solid Teflon dielectric and a split center pin that grips the jack.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eSam Tellig, writing in the November 1996 issue of \u003cem\u003eStereophile\u003c\/em\u003e, said the Silver Streak \"represents a major performance breakthrough for the price.\" He added: \"The sound is cleaner, quicker, less confused.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTodd Warnke, reviewing for \u003cem\u003eSoundStage!\u003c\/em\u003e in April 1996, wrote that \"the Silver Streak sets a new standard for me.\" Both reviews date from the cable's first year, and Kimber has kept the design in the line since.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a taste of silver without an all-silver price\u003c\/strong\u003e — Silver Streak puts one silver strand among two copper ones, and reviewers heard a cleaner, quicker sound, so busy passages untangle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the three-wire braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou dress cables in tight spaces\u003c\/strong\u003e — three thin jacketed wires bend where a fat cable will not, so the plugs sit square on the jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that grips\u003c\/strong\u003e — the Ultraplate Black's split center pin seats firmly on the jack, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — Silver Streak is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-silver-streak-interconnect-cable-3-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Silver Streak XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Silver Streak from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each Ultraplate Black plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the Ultraplate Black connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber's own RCA plug in a black finish. Kimber machines it from solid metal. It uses the Ultraplate contact surface and has a solid Teflon dielectric and a split center pin.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of strands in more than one gauge. Kimber uses this stranding in every interconnect it makes and says the mix of gauges spreads the signal across the bundle.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs Silver Streak shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber relies on the three-wire braid to reject noise, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy mix copper and silver?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber built the Silver Streak as its first hybrid, with two copper strands and one silver. The silver strand is Kimber's AGSS, the copper its TCSS.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from Silver Streak?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-silver-streak-interconnect-cable-1-0-meter-wbt-0114cu-rcas-pair\" style=\"color:#8a5a2b;\"\u003eKimber Silver Streak with WBT-0114 Cu plugs\u003c\/a\u003e is the next rung. It is the same Silver Streak cable ended in WBT's nextgen plug with a locking collet clamp.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"New","offer_id":45981207036077,"sku":"NEW-KKSSUPB-4-PR-RCRC","price":1836.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKSSUPB_RCRC_01_2024__38103.1713384449.1280.1280_1b15663b-291f-42e0-804c-8f36e8ef560f.jpg?v=1778138646"},{"product_id":"kimber-kable-tonik-interconnect-cable-1-0-meter-rca-to-rca-single","title":"Kimber Kable Tonik Interconnect Cable - 1.0 Meter - RCA to RCA - SIngle","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eTonik Is the First Rung of the Kimber Ladder\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Tonik is the least expensive interconnect Kimber makes. It is built the way every Kimber cable is built: three conductors braided by hand in Ogden, Utah. Kimber names it after the first note of a scale. The aim is a base that is accurate before it is anything else.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree Copper Conductors in a Tri-Braid\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe conductors are Kimber's VariStrand copper. Each is a bundle of strands in more than one gauge. Kimber says the mix of gauges spreads the signal across the bundle. The three are woven in Kimber's tri-braid field geometry. The braid is the noise control; there is no separate shield.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eA PE Dielectric and a Plug Kimber Machines Itself\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber insulates the Tonik with what it calls a special-recipe PE, or polyethylene, dielectric. Kimber publishes the result: 52 pF of capacitance and 0.772 µH of inductance per meter of cable. Low capacitance keeps a line-level signal intact over a longer run.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Ultratike Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTonik ends in the Ultratike, Kimber's own entry RCA plug. Kimber machines it from solid metal stock. It carries the Ultraplate contact surface. Kimber says that surface gives high conductivity and durability, and works with any plating on your gear. Inside is a solid Teflon dielectric and a split center pin that grips the jack.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eArt Dudley, writing in \u003cem\u003eStereophile\u003c\/em\u003e on November 23, 2011, found the Toniks \"offered clarity without brightness, and reasonably good amounts of color, texture, and touch.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe Tonik still appears in the 2026 edition of \u003cem\u003eStereophile\u003c\/em\u003e’s Recommended Components, which lists the cables its writers have used and stand behind.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou are replacing the cable that came in the box\u003c\/strong\u003e — the Tonik is built by hand in Utah from Kimber's own copper, so the first upgrade is a real one\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the tri-braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that grips\u003c\/strong\u003e — the Ultratike's split center pin seats firmly on the jack, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou may move up later\u003c\/strong\u003e — every Kimber interconnect above the Tonik uses the same braid idea, so you will know the house sound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — the Tonik is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-tonik-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Tonik XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Tonik from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each Ultratike plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/turntables\" style=\"color:#8a5a2b;\"\u003eTurntables\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the Ultratike connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber's own entry RCA plug. It is machined from solid metal, uses Kimber's Ultraplate contact surface, and has a solid Teflon dielectric and a split center pin.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of copper strands in more than one gauge. Kimber uses this stranding in every interconnect it makes.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs the Tonik shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber relies on the tri-braid geometry to reject noise, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Tonik?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-pbj-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eKimber PBJ\u003c\/a\u003e is the next rung. It keeps the tri-braid and moves to a fluorocarbon dielectric and the Ultraplate plug.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"New","offer_id":45981209690285,"sku":"NEW-KKTON-1-SIN-RCRC","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKTON_RCRC_01_2023__45768.1692300748.1280.1280_2e918faf-fcfb-4718-ad54-4870923c006b.jpg?v=1778138828"},{"product_id":"cardas-audio-clear-interconnect-cable-1-0-meter-xlr-to-xlr-pair","title":"Cardas Audio Clear Interconnect Cable - 1.0 Meter - XLR to XLR - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eClear Is the Cable the Rest of the Cardas Line Points To\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas Audio's Clear is the interconnect Cardas designed for reference systems in acoustically neutral rooms. The company describes it as completely neutral and transparent, with superb dynamics, extension and speed. It says the Clear works in long or short runs alike. This is the Rev.1 version. It is hand terminated in Bandon, Oregon.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThree Conductors in a Triangle\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThree conductors at 25.5 AWG sit in an equilateral triad, a triangle rather than a pair or a square. Each is a Matched Propagation conductor on a Kevlar core, built from Cardas Grade 1 copper, 99.9999% pure, in Litz form with every strand enamel coated.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eStrands Down to 41 Gauge, Suspended in Air\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe individual strands run from 41 AWG to 39 AWG, and their sizes step in Golden Ratio proportions. Each conductor wears an ultra-thin extruded PTFE jacket and sits inside an anti-static LDPE air tube. Carbon-impregnated PTFE tape binds the three.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA second ring of PTFE air tubes, scaled 1.618 times larger than the core tubes, holds the composite shield of tinned copper and magnet wire away from the signal. An ultra-soft extruded TPR jacket finishes the cable. It measures 11.43 mm across.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe CG XLR, Machined for the Flagship Tier\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eClear ends in the Cardas CG XLR, the company's reference cable-mount XLR. It is a three-piece threaded design in high-copper, non-magnetic brass, with silver contacts under a rhodium flash. A fourth solder pin bonds the shell to the body, and a red or black O-ring marks the channel.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eStereophile\u003c\/em\u003e lists the Clear Rev.1 in its 2025 Recommended Components, noting that with it in his system its reviewer \"gained significant measures of detail and transparency.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eThe Absolute Sound\u003c\/em\u003e named the Clear an Editors' Choice in 2013, and \u003cem\u003eStereophile\u003c\/em\u003e has kept it in Recommended Components from the 2018 edition through the 2025 edition.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou have a reference system in a treated room\u003c\/strong\u003e — Cardas designed the Clear for exactly that, so the cable is chosen for the room you built\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need a long run\u003c\/strong\u003e — Cardas says the Clear works in long or short runs alike, so separates across the room are not a compromise\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour rack radiates\u003c\/strong\u003e — the composite shield rides on its own ring of air tubes, so noise is rejected without loading the signal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want the reference plug\u003c\/strong\u003e — the CG XLR is machined brass with rhodium-over-silver contacts in a threaded three-piece body, so it grips and resists corrosion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components have only RCA jacks\u003c\/strong\u003e — the Clear XLR is balanced at both ends and will not fit an RCA jack. Choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-interconnect-cable-1-0-meter-rca-to-rca-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear RCA\u003c\/a\u003e instead, or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun the Clear from a balanced XLR output on your DAC, streamer, CD player or phono stage to a balanced XLR input on your preamp or amplifier. Keep left to left and right to right. Line up the pins and push until the latch clicks. Press the latch tab to release the plug.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen leave it alone. Cardas says its cables settle with use, so plug in and listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/preamplifiers\" style=\"color:#8a5a2b;\"\u003ePreamplifiers\u003c\/a\u003e\u003c\/strong\u003e — source to preamp, preamp to amp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/stereo-amplifiers\" style=\"color:#8a5a2b;\"\u003eStereo Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the power amp end of a separates system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to preamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/cd-players-and-transports\" style=\"color:#8a5a2b;\"\u003eCD Players \u0026amp; Transports\u003c\/a\u003e\u003c\/strong\u003e — disc player to preamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the equilateral triad?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThree conductors arranged as a triangle with equal sides. Cardas uses it in the Clear in place of a twisted pair or a star-quad.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the CG XLR connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas's reference cable-mount XLR. A three-piece threaded brass body, silver contacts under a rhodium flash, a fourth solder pin to bond the shell, and a red or black O-ring to mark the channel.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does Rev.1 mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe current version of the Clear. Cardas lists the interconnect as Rev 1, and \u003cem\u003eStereophile\u003c\/em\u003e notes the revision applies to both the RCA and the XLR versions.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eCardas says at most 200 hours, and usually half that. Its advice is simple: \"Plug them in, leave them plugged in, and enjoy your life.\"\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does Cardas give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA lifetime warranty. Every Litz strand is sealed in enamel, so the copper does not oxidize. Cardas says that is why its cables last.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from the Clear?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/cardas-audio-clear-beyond-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eCardas Clear Beyond XLR\u003c\/a\u003e is the top of the line. It moves to four conductors in a star-quad, strands down to 47 gauge, and a 13 mm body with a CG XLR redesigned to fit it.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor's tour of the Cardas factory in Bandon, where the Clear is built and terminated.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/xmjVJNxKV5Q\" title=\"Inside Cardas – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor walks through Cardas cable construction, from Litz strands to hand-soldered plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/OdDJBBxrzY8\" title=\"Cardas Cable Construction – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, reference systems, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Cardas","offers":[{"title":"1.0 Meter \/ Pair \/ New","offer_id":45981213851821,"sku":"NEW-CRCLEIC-1-PR-XLXL","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/CRCLEIC_XRL-LARGE__28186.1691710198.1280.1280_465ca073-4ebd-4791-a076-a17d354b8986.jpg?v=1778107491"},{"product_id":"kimber-kable-cadence-subwoofer-cable-3-0-meter-wbt-0114-rcas","title":"Kimber Kable Cadence Subwoofer Cable - 3.0 Meter - WBT 0114 RCA's","description":"\u003ch3\u003eTight, Well-Defined Bass Impact\u003c\/h3\u003e\r\n\r\n\u003cp align=\"justify\"\u003eCadence is a high-performance subwoofer interconnect from Kimber Kable. It is specially engineered to excel at the low frequencies using a stranded copper coaxial design. The copper shielding helps eliminate common noise problems in subwoofers. The durable PVC jacket is ideal for custom installations. \u003c\/p\u003e\r\n\r\n\u003cp align=\"justify\"\u003eWith Cadence, you'll enjoy excellent clarity and dynamics with the tight, well-defined bass impact that a realistic movie and multi-channel music experience requires. \u003c\/p\u003e\r\n\r\n\u003cp align=\"justify\"\u003eCadence now features high-quality WBT-0114 RCA connectors, featuring contacts that utilize pure OFC Oxygen Free Copper. \u003c\/p\u003e","brand":"Kimber Kable","offers":[{"title":"New","offer_id":45981217423533,"sku":"NEW-KKCAD114-3","price":267.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKCAD114__80454.1689623335.1280.1280_c6dbf192-77b6-427b-8e7e-69b8426517b9.jpg?v=1778118494"},{"product_id":"audioquest-angel-interconnect-cable-3-0-meter-rca-to-rca-pair","title":"AudioQuest Angel Interconnect Cable - 3.0 Meter - RCA to RCA - Pair","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eAngel Is the Solid-Silver Top of AudioQuest's Bridges \u0026amp; Falls Series\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAudioQuest's Angel is the most refined cable in the Bridges \u0026amp; Falls series and the only one made of solid silver. It carries both channels in one jacket and runs the silver inside FEP air tubes. It adds the 72-volt Dielectric-Bias System, and the plugs are silver over pure Red Copper.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eSolid Perfect-Surface Silver Conductors\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe wires are solid Perfect-Surface Silver, which AudioQuest calls PSS. Silver conducts better than copper. AudioQuest says the smooth skin cuts distortion from grain boundaries and helps the cable drain radio noise evenly. Solid wire also removes strand interaction.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFEP Air-Tubes and the Dielectric-Bias System\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe positive wire runs inside an FEP Air-Tube, so the metal barely touches its insulation. AudioQuest gives the negative leg a lossy insulation on purpose, saying the two do different jobs. The DBS pack holds a steady 72 volts across the insulation so it behaves the same at every level. An RF Trap keeps noise out.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAround the cable is a three-layer shield with a carbon layer. AudioQuest calls it Carbon-Based 3-Layer Noise-Dissipation. An ordinary shield drains radio noise into the ground, and AudioQuest says that dirties the reference the signal is measured against. The carbon layers soak up the noise first.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Direct-Silver Plated Red Copper Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAngel ends in a Direct-Silver Plated plug. The body is pure Red Copper, AudioQuest's purest grade. The silver goes straight onto the copper with no nickel underneath, and AudioQuest says nickel causes distortion. The plug is cold welded to the wire. There is no solder in the path.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe layout is AudioQuest's Asymmetrical Double-Balanced Geometry, built for RCA use. The ground and the shield are kept apart. The ground path gets a lower impedance than the signal path, which AudioQuest says makes for a richer, quieter sound.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAlexander Aschenbrunner reviewed the RCA version for Germany's \u003cem\u003eFIDELITY\u003c\/em\u003e in September 2024 and heard a cable that was \"extremely quiet\" and praised its \"completely uninterrupted reproduction of all frequency ranges.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHe called the sound \"remarkably clean, precise\" and wrote that \"voices are reproduced extremely authentically.\" Only the music played, he found, with the speakers seeming to vanish.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want solid silver\u003c\/strong\u003e — Angel is the only solid-silver cable in the series, so the metal matches AudioQuest's flagships\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou listen for quiet and precision\u003c\/strong\u003e — \u003cem\u003eFIDELITY\u003c\/em\u003e heard an extremely quiet, precise cable, so the stage reaches back\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpace behind the rack is tight\u003c\/strong\u003e — one slim cable carries both channels, so it bends where a pair will not\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want silver from wire to contact\u003c\/strong\u003e — solid silver meets Direct-Silver plugs over Red Copper, so the metal never changes at the end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour left and right jacks sit far apart\u003c\/strong\u003e — both channels share one jacket here. For mono amps or a wide rack, call us and we will suggest a two-cable option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Angel from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each plug straight on until it seats. Pull it off by the barrel, never by the cable. Leave the DBS pack attached; it needs no switch.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the DBS pack on the cable?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAudioQuest's 72-volt Dielectric-Bias System. A small battery pack holds a steady voltage across the insulation. AudioQuest says this makes the insulation behave the same at every level. An RF Trap keeps the pack from feeding radio noise into the wire.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is Direct-Silver plating?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eSilver plated straight onto the copper plug body. There is no nickel layer underneath. AudioQuest says nickel causes distortion, so it leaves it out.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs this one cable or two?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eOne. AudioQuest's Bridges \u0026amp; Falls cables carry both channels inside a single jacket. There are two plugs at each end and one lead to route behind the rack.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy silver wires?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eSilver conducts better than copper. AudioQuest says its solid Perfect-Surface Silver cuts distortion from grain boundaries and drains radio noise evenly across the band.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat warranty does AudioQuest give?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA limited lifetime warranty to the original owner, for cables bought from an authorized US dealer. AudioQuest will repair or replace a defective cable that has not been abused. Keep your proof of purchase.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from Angel?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAngel is the top of our AudioQuest RCA range. Ready to go further? Call us and we will talk through the options.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, solid-core cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"AudioQuest","offers":[{"title":"3.0 Meter \/ New","offer_id":45981220077741,"sku":"NEW-AQAN-3-RCRC","price":2299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/aqanrr-large__10472.1689623245.1280.1280_900c8072-8893-47d5-8a26-1fb326cdcfe8.jpg?v=1778099666"},{"product_id":"kimber-kable-silver-streak-interconnect-cable-1-0-meter-pair-ultraplate-black-rca-to-rca","title":"Kimber Kable Silver Streak Interconnect Cable - 1.0 Meter - Pair - Ultraplate Black RCA To RCA","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eSilver Streak Is Kimber's Copper and Silver Hybrid\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Silver Streak pairs two copper conductors with one silver one. Kimber calls it its first copper and silver hybrid cable and places it in the Summit Series. It has been in the line since the mid-1990s. Like every Kimber cable, it is braided and terminated by hand in Ogden, Utah.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eTwo Strands of Copper, One Strand of Silver\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber names the conductors: two strands of its TCSS copper and one strand of its AGSS silver, each in VariStrand form with mixed gauges. The three are woven in Kimber's three-wire braid. The braid does the noise rejection. There is no separate shield around it.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLow-Loss Fluorocarbon and Hand-Soldered Ends\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor sits in a low-loss fluorocarbon dielectric. Kimber publishes the result: 53 pF of capacitance, 0.75 µH of inductance and 0.061 ohms of resistance per meter. The plugs are soldered on by hand under nitrogen, which keeps the joint clean as it cools.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Ultraplate Black Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eSilver Streak ends in Kimber's Ultraplate Black. It is the black-finished version of Kimber's own RCA plug, machined from solid metal stock. Kimber says the Ultraplate contact surface gives high conductivity and long life. It also works with any plating on your gear. Inside is a solid Teflon dielectric and a split center pin that grips the jack.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eSam Tellig, writing in the November 1996 issue of \u003cem\u003eStereophile\u003c\/em\u003e, said the Silver Streak \"represents a major performance breakthrough for the price.\" He added: \"The sound is cleaner, quicker, less confused.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eTodd Warnke, reviewing for \u003cem\u003eSoundStage!\u003c\/em\u003e in April 1996, wrote that \"the Silver Streak sets a new standard for me.\" Both reviews date from the cable's first year, and Kimber has kept the design in the line since.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a taste of silver without an all-silver price\u003c\/strong\u003e — Silver Streak puts one silver strand among two copper ones, and reviewers heard a cleaner, quicker sound, so busy passages untangle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the three-wire braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou dress cables in tight spaces\u003c\/strong\u003e — three thin jacketed wires bend where a fat cable will not, so the plugs sit square on the jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that grips\u003c\/strong\u003e — the Ultraplate Black's split center pin seats firmly on the jack, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — Silver Streak is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-silver-streak-interconnect-cable-3-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Silver Streak XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Silver Streak from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each Ultraplate Black plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the Ultraplate Black connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber's own RCA plug in a black finish. Kimber machines it from solid metal. It uses the Ultraplate contact surface and has a solid Teflon dielectric and a split center pin.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of strands in more than one gauge. Kimber uses this stranding in every interconnect it makes and says the mix of gauges spreads the signal across the bundle.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs Silver Streak shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber relies on the three-wire braid to reject noise, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy mix copper and silver?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber built the Silver Streak as its first hybrid, with two copper strands and one silver. The silver strand is Kimber's AGSS, the copper its TCSS.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from Silver Streak?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-silver-streak-interconnect-cable-1-0-meter-wbt-0114cu-rcas-pair\" style=\"color:#8a5a2b;\"\u003eKimber Silver Streak with WBT-0114 Cu plugs\u003c\/a\u003e is the next rung. It is the same Silver Streak cable ended in WBT's nextgen plug with a locking collet clamp.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"New","offer_id":45981223714989,"sku":"NEW-KKSSUPB-1-RP-RCRC","price":576.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKSSUPB_RCRC_01_2024__70045.1713382977.1280.1280_85c5411f-3fdb-4329-8be4-66964ad03eb4.jpg?v=1778138608"},{"product_id":"kimber-kable-hero-interconnect-cable-0-5-meter-ultraplate-black-rca-to-rca-single","title":"Kimber Kable Hero Interconnect Cable - 0.5 Meter - Ultraplate Black RCA to RCA - Single","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eHero Is Kimber's Four-Wire Braid\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Hero is the interconnect Kimber built around four conductors instead of three. It sits in Kimber's Ascent Series and has been a reviewer favorite for many years. Like every Kimber cable, it is braided and terminated by hand in Ogden, Utah.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eFour 19 AWG Copper Conductors in a Quadratic Braid\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is 19 AWG VariStrand copper, a bundle of strands in more than one gauge. The four are woven in what Kimber calls a quadratic braid. Kimber says the braid gives wide bandwidth and noise reduction without the use of shielding.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eVirgin FEP Insulation and Hand-Soldered Ends\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber insulates each conductor with virgin FEP, a fluorocarbon it applies in single and dual layers. It publishes the result: 78 pF of capacitance, 0.385 µH of inductance and 0.037 ohms of resistance per meter. The plugs are soldered on by hand under nitrogen, which keeps the joint clean as it cools.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe Ultraplate Black Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHero ends in Kimber's Ultraplate Black. It is the black-finished version of Kimber's own RCA plug, machined from solid metal stock. Kimber says the Ultraplate contact surface gives high conductivity and long life. It also works with any plating on your gear. Inside is a solid Teflon dielectric and a split center pin that grips the jack.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eThe Absolute Sound\u003c\/em\u003e staff, in the 2017 Editors' Choice list published April 6, 2017, wrote that \"Hero's bass lives up to its name, prodigious in amplitude and definition.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eJason Kennedy, reviewing for \u003cem\u003ehi-fi+\u003c\/em\u003e on January 17, 2018, found that \"as soon as you drop it into the system the timing comes into focus.\" \u003cem\u003eStereophile\u003c\/em\u003e’s 2026 Recommended Components calls Hero the \"strong, silent type\" among cables.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want more than a three-wire cable gives\u003c\/strong\u003e — Kimber designed Hero's four-wire braid for wide bandwidth, so the whole range gets through\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the quadratic braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou value bass weight\u003c\/strong\u003e — \u003cem\u003eThe Absolute Sound\u003c\/em\u003e singled out Hero's low end for its size and definition, so kick drums land\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that grips\u003c\/strong\u003e — the Ultraplate Black's split center pin seats firmly on the jack, so the connection stays clean\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — Hero is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-hero-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Hero XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Hero from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Push each Ultraplate Black plug straight on until it seats. Pull it off by the barrel, never by the cable.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the Ultraplate Black connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber's own RCA plug in a black finish. Kimber machines it from solid metal. It uses the Ultraplate contact surface and has a solid Teflon dielectric and a split center pin.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of strands in more than one gauge. Kimber uses this stranding in every interconnect it makes and says the mix of gauges spreads the signal across the bundle.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs Hero shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber says the four-wire quadratic braid provides the noise reduction, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy four conductors instead of three?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHero has four 19 AWG conductors where Kimber's three-wire cables have three. Kimber says the four-wire quadratic braid provides wide bandwidth and noise reduction without shielding.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from Hero?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-hero-interconnect-cable-1-0-meter-wbt-114-rcas-pair\" style=\"color:#8a5a2b;\"\u003eKimber Hero with WBT-0114 Cu plugs\u003c\/a\u003e is the next rung. It is the same Hero cable ended in WBT's nextgen plug with a locking collet clamp.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor looks at the Hero braid and its plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/Q_w45MPvzgc\" title=\"Kimber Kable Hero Interconnect Ultraplate Black RCA's – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eThe balanced version of the same cable, for a look at how Kimber terminates it.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/mm7bNwYYE3w\" title=\"Kimber Kable Hero Interconnect with XLR'S – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"0.5 Meter \/ Single \/ New","offer_id":45981233184941,"sku":"NEW-KKHEUPB-0.5-SIN-RCRC","price":115.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKHEUPB_RCRC_01_2024__50142.1721764342.1280.1280_fde0a35b-f9e9-43b7-82f8-2fed37078ba7.jpg?v=1778138304"},{"product_id":"kimber-kable-hero-interconnect-cable-5-0-meter-wbt-114-rcas-single","title":"Kimber Kable Hero Interconnect Cable - 5.0 Meter - WBT 114 RCA's - Single","description":"\u003cdiv style=\"max-width:720px;margin:0 auto;padding:32px 24px 48px 24px;background:#ffffff;\"\u003e\n\u003ch2 style=\"font-size:1.25em;margin:0 0 0.35em 0;font-weight:600;\"\u003eHero Is Kimber's Four-Wire Braid\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber Kable's Hero is the interconnect Kimber built around four conductors instead of three. It sits in Kimber's Ascent Series and has been a reviewer favorite for many years. Like every Kimber cable, it is braided and terminated by hand in Ogden, Utah.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eFour 19 AWG Copper Conductors in a Quadratic Braid\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is 19 AWG VariStrand copper, a bundle of strands in more than one gauge. The four are woven in what Kimber calls a quadratic braid. Kimber says the braid gives wide bandwidth and noise reduction without the use of shielding.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eVirgin FEP Insulation and Hand-Soldered Ends\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eKimber insulates each conductor with virgin FEP, a fluorocarbon it applies in single and dual layers. It publishes the result: 78 pF of capacitance, 0.385 µH of inductance and 0.037 ohms of resistance per meter. The plugs are soldered on by hand under nitrogen, which keeps the joint clean as it cools.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eThe WBT-0114 Cu Plug, Explained\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHero ends in the WBT-0114 Cu, a plug WBT builds under its nextgen name. The signal contacts are pure oxygen-free copper. A brass sleeve tied to the ground contact provides the shielding, and WBT rates the plug at 75 ohms to 400 MHz. The metal parts are a copper alloy plated in 24-carat gold.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThe barrel locks on with WBT's patented collet clamp, a two-section sleeve in a ruthenium finish that works like the chuck on a drill. Twist the barrel and the plug tightens onto the jack. The center pin is slotted so it springs against the socket.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhat Reviewers Are Saying\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003cem\u003eThe Absolute Sound\u003c\/em\u003e staff, in the 2017 Editors' Choice list published April 6, 2017, wrote that \"Hero's bass lives up to its name, prodigious in amplitude and definition.\"\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eJason Kennedy, reviewing for \u003cem\u003ehi-fi+\u003c\/em\u003e on January 17, 2018, found that \"as soon as you drop it into the system the timing comes into focus.\" \u003cem\u003eStereophile\u003c\/em\u003e’s 2026 Recommended Components calls Hero the \"strong, silent type\" among cables.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWho Is This Interconnect Best For?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want more than a three-wire cable gives\u003c\/strong\u003e — Kimber designed Hero's four-wire braid for wide bandwidth, so the whole range gets through\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour sources sit near power supplies\u003c\/strong\u003e — the quadratic braid cancels induced noise along its length, so the shelf stays out of the music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou value bass weight\u003c\/strong\u003e — \u003cem\u003eThe Absolute Sound\u003c\/em\u003e singled out Hero's low end for its size and definition, so kick drums land\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou want a plug that locks\u003c\/strong\u003e — the WBT-0114 Cu's collet clamp tightens onto the jack, so the connection cannot work loose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour components both offer XLR\u003c\/strong\u003e — Hero is single-ended RCA. If both your components have balanced XLR jacks, choose the \u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-hero-interconnect-cable-1-0-meter-xlr-to-xlr-pair\" style=\"color:#8a5a2b;\"\u003eKimber Hero XLR\u003c\/a\u003e instead. Or call us and we will match the connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eHow Does It Connect to Your System?\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eRun Hero from a line-level output, a DAC, streamer, CD player or phono stage, to a line-level input on your amplifier or preamp. Keep left to left and right to right. Slide each WBT plug onto the jack, then turn the barrel to tighten the clamp. Loosen it before you pull the plug off.\u003c\/p\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThen listen. Other and longer lengths available. Call for prices.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003ePairs Well With\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eAn interconnect is one link in the chain. It usually joins these categories.\u003c\/p\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/integrated-amplifiers\" style=\"color:#8a5a2b;\"\u003eIntegrated Amplifiers\u003c\/a\u003e\u003c\/strong\u003e — the usual input end\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/digital-to-analog-converters\" style=\"color:#8a5a2b;\"\u003eDigital-to-Analog Converters\u003c\/a\u003e\u003c\/strong\u003e — DAC output to amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/phono-preamplifiers\" style=\"color:#8a5a2b;\"\u003ePhono Preamplifiers\u003c\/a\u003e\u003c\/strong\u003e — phono stage to line input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/collections\/speaker-cables\" style=\"color:#8a5a2b;\"\u003eSpeaker Cables\u003c\/a\u003e\u003c\/strong\u003e — the last link to the speakers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat is the WBT-0114 Cu connector?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eA WBT nextgen RCA plug with pure oxygen-free copper contacts, a shielding brass sleeve on the ground side, gold-plated copper-alloy metalwork and a twist-to-lock collet clamp.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs WBT 114 the same plug as WBT-0114 Cu?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eYes. Audio Advisor titles write it as WBT 114, WBT 114Cu or WBT 0114Cu. They are all the copper version of WBT's 0114 nextgen plug.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhat does VariStrand mean?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eEach conductor is made of strands in more than one gauge. Kimber uses this stranding in every interconnect it makes and says the mix of gauges spreads the signal across the bundle.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs Hero shielded?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eThere is no separate shield. Kimber says the four-wire quadratic braid provides the noise reduction, which is why the cable has no outer jacket.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eWhy four conductors instead of three?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eHero has four 19 AWG conductors where Kimber's three-wire cables have three. Kimber says the four-wire quadratic braid provides wide bandwidth and noise reduction without shielding.\u003c\/p\u003e\n\u003ch3 style=\"font-size:1.05em;margin:0.9em 0 0.25em 0;font-weight:600;\"\u003eIs there a step up from Hero with WBT-0114 Cu plugs?\u003c\/h3\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003e\u003ca href=\"https:\/\/www.audioadvisor.com\/products\/kimber-kable-silver-streak-interconnect-cable-1-0-meter-pair-ultraplate-black-rca-to-rca\" style=\"color:#8a5a2b;\"\u003eKimber Silver Streak\u003c\/a\u003e is the next rung. It moves to Kimber's Summit Series and adds a silver conductor to two copper ones.\u003c\/p\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eSee It in Action\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eAudio Advisor looks at the Hero braid and its plugs.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/p9tconXVYVI\" title=\"Kimber Kable Hero Interconnect with WBT 0144's – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin:0 0 0.5em 0;line-height:1.55;\"\u003eThe balanced version of the same cable, for a look at how Kimber terminates it.\u003c\/p\u003e\n\u003ciframe width=\"100%\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/mm7bNwYYE3w\" title=\"Kimber Kable Hero Interconnect with XLR'S – Audio Advisor\" style=\"border:0;margin:0 0 0.9em 0;display:block;\" allowfullscreen\u003e\u003c\/iframe\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cul style=\"margin:0 0 0.9em 0;padding-left:1.4em;line-height:1.6;\"\u003e\n\u003cli\u003e40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.\u003c\/li\u003e\n\u003cli\u003e60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.\u003c\/li\u003e\n\u003cli\u003eReal Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.\u003c\/li\u003e\n\u003cli\u003eFree Shipping — On orders over $49, delivered to your door.\u003c\/li\u003e\n\u003cli\u003eFlexible Payment Options — Financing available so you can start listening now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size:1.25em;margin:1.4em 0 0.35em 0;font-weight:600;\"\u003eLearn More\u003c\/h2\u003e\n\u003cp style=\"margin:0 0 0.9em 0;line-height:1.55;\"\u003eWant to learn more about interconnects, braided cables, or RCA versus XLR? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\" style=\"color:#8a5a2b;\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Kimber Kable","offers":[{"title":"5.0 Meter \/ Single \/ New","offer_id":45981235544237,"sku":"NEW-KKHE114-5-SIN-RCRC","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/KKHE114__64333.1692298738.1280.1280_2c85a272-dcf5-4dad-bfbc-bbc988a82a66.jpg?v=1778138208"}],"url":"https:\/\/www.audioadvisor.com\/collections\/interconnect-cables.oembed?page=13","provider":"Audio Advisor","version":"1.0","type":"link"}