Audioengine A2+ Wireless Speaker System (Pair)

Epic Desktop Setup

The Audioengine A2+ Wireless Speaker system was designed and hand-built with the goal of exceeding expectations of both value and performance. These small computer speakers really pack a punch, making them the go-to system for desktop setups and smaller-room audio.

Built-in power amplifiers save space and eliminate the need to connect the A2+ Wireless to a stereo receiver or external power amp. Simply plug the left speaker into an AC outlet and connect the included speaker wire from the left to right speaker. All internal components of the A2+ are tuned together, providing a more efficient system requiring less power than passive speakers and amplifiers. With superior stereo separation and incredible imaging, the A2+ has a clear sonic advantage over all-in-one systems.

Small Speakers, Big Sound

The A2+ Wireless Speakers are constructed with custom Audioengine components: Aramid fiber woofers, silk tweeters, and built-in power amps wrapped in precision tuned, hand-crafted cabinets. The bass was teased from the A2+ with some clever acoustic and electrical design without using any digital signal processing or fake bass boost circuits.

Room-filling audio is provided by the dual Class AB monolithic amplifiers with a total peak power of 60 watts (15W RMS / 30W peak per channel). The drivers consist of 2.75′′ Aramid fiber woofers and 3/4” silk dome tweeters.

Set Up In Seconds Simple. No Hassle. Easy To Use.

The A2+ Wireless Speaker sets up in seconds and is ready to use right away. There are no network to setup, no passwords to create, and no buttons to push. The inputs are always ready to go.

Get Connected

The A2+ Wireless features aptX HD High Definition Bluetooth wireless audio. The aptx HD audio ensures your Bluetooth enabled device can deliver High Definition (HD) audio by using a high bandwidth Bluetooth protocol to preserve the HD sound quality. The wireless connectivity offers 24-bit audio quality over Bluetooth with a 100 ft. + wireless range.

Wired inputs consist of a: 3.5mm stereo mini-jack plus RCA and USB. Also onboard are RCA variable line-outs.

• Bluetooth receiver type 5.0 audio (Bluetooth aptX)
• Amplifier type: Dual class AB monolithic
• Power output: 60W peak power total (15W RMS / 30W peak per channel), AES
• Drivers: 2.75′′ Aramid fiber woofers, 3/4” silk dome tweeters
• Inputs: 3.5mm stereo mini-jack, RCA, USB, Bluetooth
• Outputs: RCA variable line-out

Overview

• Connector type: Micro USB
• USB device class: type 1.1 and above
• Internal D/A converter: CSR8670
• Input bit depth: up to 16 bits native
• Input sample rate: up to 48KHz native
• Input voltages: 110-240V 50/60Hz auto-switching SNR: >95dB (typical A-weighted)
• Freq. response: 65Hz-22kHz ±2.0dB
• Bluetooth Audio: aptX, SBC, AAC
• Input bit depth/sample rate: up to 16 bits native/48KHz native
• Dimensions, each speaker (HWD): 6′′ x 4′′ x 5.25′′
• Weight (both speakers): 6.7 lbs.

• Internal BT receiver: CSR8670
• Input bit depth: 16 bits
• Bluetooth receiver type: Bluetooth 5.0 audio
• Supported codecs: aptX low latency, aptX, AAC, SBC
• Wireless operation range: Up to 100ft (30m) typical
• Input data rate: Determined by Bluetooth
• Wireless latency: ~30 milliseconds (ms)

"The A2+ combines audiophile-friendly sound with the convenience of Bluetooth to create a broadly appealing compact speaker package."

"Audioengine's A2+ is the kind of desktop system that lends itself to long listening sessions. Its sound is warm and inviting, yet clear, making it a good match for acoustic music. And while the lush, spacious sound put out by the A2+ makes it an obvious choice for audiophiles, features such as Bluetooth and a USB computer input also make it a fine option for a less fussy listener."

- Al Griffin, Sound & Vision, October 15, 2019

"GOING by size alone, you wouldn’t really expect much from the Audioengine A2+ wireless speakers. But you’d be wrong. Diminutive in size they may be, but these little tykes really pack a proverbial punch."

"At its very modest asking price, there are few, if any, active speakers out there that will give you what the Audioengine A2+ does. If you’re looking for a small-form speaker with great performance, this will fit the bill perfectly."

- J Loh, audioFi.net, July 15, 2019

"It's exceedingly rare that I come across an audio product that truly exceeds all my expectations. The A2+ is just such a product. Speakers this small have no business performing at this level, yet the A2+ did every day that I listened to them. I came home from work wanting to listen to them in the office instead of going to my reference system. Why? Because they never failed to surprise in how they recreated the music."

- Audio Pursuit, December 27, 2018