Audioengine W3R Add-on Receiver

Customize Your Wireless Audioengine Setup

For expanded convenience with your Audioengine system, customize your wireless setup with the W3R Add-on Receiver. The W3R is an expansion kit for your Audioengine W3 Wireless Audio Adapter. You can add up to two W3R Add-on Receivers for a total of three zones.

The W3R connects wirelessly to your existing W3 setup, and it can output great sounding audio to any product with its 3mm mini-jack or RCA audio connectors. Add sound to an additional room with your W3R, or you can even make your Audioengine S8 Powered Subwoofer wireless.

Easy to Set Up, Sounds Great

The W3R is a cinch to set up and use. A pairing button on the unit quickly establishes the wireless connection.

The W3 uses the CS4344 DAC, a solid, well regarded industry mainstay. Due to the CS4344’s’s high signal-to-noise specs, the W3R delivers impressive low noise and low distortion characteristics that will bring out the best in your music.

Overview

• Add-on wireless receiver for Audioengine W3 Wireless Audio Adaptor
• Plug-and-play operation
• Pairing button
• Analog-to-digital converter: CS5343
• Output: analog mini-jack
• Inputs: 3mm stereo mini-jack, one pair of RCA audio connectors, USB audio power

• Cable with 3mm stereo mini-plugs (20″)
• 3mm mini-jack to RCA adapter cable (12″)
• USB power adapter

Overview

• Full scale output: 1.0Vrms
• Output impedance: 470 ohms
• Power source: USB power adapter
• Power requirements: 150mA, 5V
• SNR: 95dB
• THD+N: 0.01%
• Crosstalk: -65dB
• Frequency response: 20Hz to 20KHz, +/- .2dB
• Wireless range: >100ft
• Latency: <20ms
• Dimensions: 3.9" long x 1.2" wide x 0.4" deep
• Shipping weight: 1 lb.

• Operating Temperature: 32 to 95 degrees F
• Non-operating Temp: -4 to 113 degrees F
• Relative Humidity: 5% to 95% non-condensing