Gingko Cloud 10 Isolation Platform (18 inch x 14 inch)

Put Your A / V Gear on Cloud Nine with the Cloud Ten

Put your audio and video gear on cloud nine with the Cloud Ten Vibration Control Platform from Gingko Audio.

Cloud Ten is a tunable vibration control system offering complete flexibility in getting the most out of your audio system. Cloud Ten consists of an acrylic isolation platform and rubber support balls. Its elegant design belies its functional effectiveness. Cloud Ten works well because of the correct choice of material coupled with a flexible design that lets you experiment with different balls in different positions for the best overall performance.

We highly recommend Cloud Ten for turntables, CD/DVD transports, preamps, and other gear that is especially susceptible to the types of vibration problems that Cloud Ten vanquishes. Laboratory tests prove that Cloud Ten dramatically lessens vibration. But your eyes and ears are the best judges, and Cloud Ten will reward them with its superb performance.

Acrylic does an excellent job in dissipating any vibrating energy it receives because of its complex, dense, and irregular molecular structure. In addition to the acrylic platform, Cloud 10 also uses rubber balls to further isolate the equipment from vibration. The rubber balls serve two critical functions. They provide four degrees of freedom in the movement of the top platform relative to the bottom base. The top platform sitting on the rubber balls can freely move up and down, front to back, side to side, and rotationally without causing undulating, repeating motion that continues long after the original vibration.

The rubber balls are also used to balance the uneven load of some equipment such as amplifiers or turntables. By placing the rubber balls in the different positions in the base, you can level the equipment to even the load.

Each of the Cloud 10 balls is specially designed to optimally support a 10 lb load, and has a maximum capacity of 20 lbs. Therefore, three balls work best under a 30 lb load. Use additional balls if your equipment weighs more.

• Isolation platform and support balls
• Energy dissipating acrylic platform
• Rubber-ball 'feet' isolate and balance equipment
• Each rubber ball supports 10 lbs.
• Recommended for turntables, CD/DVD transports, preamps, and more

• Dimensions: 18" wide, 14" deep