Monitor Audio Silver FX Surround Speakers

Engineered to Provide the Perfect Surround Sound Experience

Monitor Audio has all your rear and side channel requirements covered with the Silver FX, a loudspeaker specially designed for 5.1 and 7.1 systems and featuring Monitor Audio’s advanced technology. This wall-mountable compact two-way design offers dual dispersion characteristics for the perfect surround sound set-up.

The discreet profile and angled baffle design of Monitor Audio’s specially-developed Silver FX incorporates a single 6-inch C-CAM bass/mid driver featuring RST technology and C-CAM Gold Dome tweeters.

The Silver FX can be flush-mounted on side or rear walls where it blends unobtrusively with any interior. Its dispersion characteristics can be easily changed with a switch to accommodate the precise requirements for dipole or bipole orientation, giving it maximum flexibility in multi-channel system installations.

Monitor Audio's Silver 6G Series

Revered by audiophiles around the globe, Monitor Audio's award-winning Silver Series enters its sixth generation with a host of new features to make it the best-performing ever. Taking hi-fi and home theater performance to a new level. The new Silver 6G series utilizes technological advances derived from Monitor Audio's top-of-the-line Platinum Series II. It features a completely redesigned 1" gold dome tweeter for precise treble. And it looks as it good as it sounds, offering stunning real wood veneer, piano lacquer, and contemporary satin white finishes to suit every setting.

Continuous Uninterrupted Dish Drivers

Unlike conventional driver cones, the new C-CAM (Ceramic-Coated Aluminum/Magnesium) RST (Rigid Surface Technology) bass and midrange drivers take the form of a continuous uninterrupted dish. Strengthened by a uniquely dimpled surface, their greater area radiates more sound, and driven by a larger voice coil and motor, delivers greater efficiency and a cleaner, more accurate response.

Bolt-Through Driver Design

Single bolt-through driver fixings have the dual effect of improving cabinet rigidity while further reducing vibration at the driver/cabinet interface. By this innovative method, drivers are mounted on a single tensioned through-bolt, which is secured to the back of the cabinet. The bolt not only acts as a rigid cabinet brace to reduce box coloration, it removes the need for conventional driver fixings as well, effectively decoupling the driver and baffle to eliminate another source of unwanted resonance. The result is a more fluid communication of mid-range frequencies, and with the absence of front driver fixings, a cleaner more refined overall appearance, especially in tandem with RX's 'invisible' magnetic grille location.

• Discreet design with flush wall placement and with recessed terminations
• Sealed cabinet for accurate performance when installed in cabinet, restricted voids or close to a wall
• Easily switchable dipole/ bipole modes
• Dual 1-inch C-CAM (Ceramic-Coated Aluminum/Magnesium) tweeters featuring vented Neo magnet system tuned for lower distortion and cleaner-sounding highs
• 6-inch bass/mid driver with ‘dished’ C-CAM cone profile ensures best damping and mid-range clarity
• RST Cone profile for improved diaphragm rigidity and lower distortion
• Unique-build ring/voice coil-cone coupling mechanism (DCF) carefully optimized to reduce high-frequency cone break-up and increasing the critical voice coil circumferential rigidity
• Cast polymer driver chassis design means improved rigidity and damping characteristics
• Pureflow silver-plated OFC copper internal cabling for the highest quality transfer through the signal chain
• High-quality crossovers using premium-grade bespoke polypropylene film capacitors, air-core and low-loss laminated steel-core inductors giving maximum signal transfer
• Rigid 1-inch MDF construction utilizing scientifically optimized cabinet bracing
• Single bolt-through driver technology provides increased bracing strength, rigidity and driver/baffle de-coupling
• Bespoke, high-quality bi-wire terminals
• Selected, premium-quality wood veneers, high-gloss lacquer and contemporary Satin White finishes

• Frequency Response (-6 dB): 60 Hz – 35 kHz
• Sensitivity (1W@1M): 87 dB
• Nominal Impedance: 8 ohms
• Minimum Impedance: 4.1 ohms @ 229 Hz
• Maximum SPL: 110 dBA (pair)
• Power Handling (RMS): 85 W
• Recommended Amplifier Requirements: 30 – 85 W
• Bass Alignment: Sealed cabinet
• Crossover Frequency: 2.5 kHz
• Cabinet Dimensions (excluding grille and terminals): 9-13/16" x 12-3/16" x 5-1/8"
• External Dimensions (including grille and terminals): 9-13/16" x 12-11/16" x 5-13/16"
• Weight (each): 9.48 lb.