{"product_id":"dynaudio-evoke-50-floorstanding-speaker-blonde-wood-each","title":"Dynaudio Evoke 50 Floorstanding Speaker - Blonde Wood - Each","description":"\u003ch2\u003eWhat You Need to Know\u003c\/h2\u003e\n\u003ch3\u003eWhat Is a Floorstanding Speaker?\u003c\/h3\u003e\n\u003cp\u003eA floorstanding speaker (also called a tower speaker) sits on the floor and stands tall in your room. It does not need a shelf or a stand. Because the cabinet is big, it can hold more drivers — the parts that make sound. More drivers means deeper bass, clearer mids, and more volume with less effort from your amp.\u003c\/p\u003e\n\u003cp\u003eThe Dynaudio Evoke 50 is the largest speaker in Dynaudio’s Evoke family. It is a three-way design. That means it has separate drivers for high notes (tweeter), mid notes (midrange), and low notes (two woofers). Each driver focuses on what it does best.\u003c\/p\u003e\n\u003ch3\u003eWhat Makes the Evoke 50 Special?\u003c\/h3\u003e\n\u003cp\u003eDynaudio is a Danish company that has been making speakers since 1977. They design and build every driver by hand in their own factory in Skanderborg, Denmark. That is rare — most speaker brands buy their drivers from other companies.\u003c\/p\u003e\n\u003cp\u003eThe Evoke 50 borrows technology from Dynaudio’s top-of-the-line Confidence and Contour series. The tweeter is Dynaudio’s Cerotar design — a 28mm soft-dome tweeter with an inner dome called the Hexis. The Hexis sits just behind the main dome and smooths out the high-frequency response by controlling the air pressure behind it. The result is clean, sweet treble with lots of detail.\u003c\/p\u003e\n\u003cp\u003eThe midrange driver is a 15cm unit taken directly from the higher-end Contour range. It uses a neodymium magnet — a very strong, lightweight magnet that gives the driver fast, precise control. The cone is made from MSP (Magnesium Silicate Polymer), a material Dynaudio has used in their drivers for decades because it strikes the right balance of light weight, stiffness, and damping.\u003c\/p\u003e\n\u003cp\u003eBass comes from twin 18cm woofers, also made from MSP. These use copper voice coils and Ferrite+ ceramic magnets. Two woofers share the work, so they can move more air and handle more power than a single driver could.\u003c\/p\u003e\n\u003cp\u003eDynaudio includes foam port plugs with each speaker. The rear-firing bass port has three tuning options: fully open, half-open, or fully closed. This lets you adjust the bass to fit your room. If your speakers sit close to a wall, you can reduce the bass so it stays tight and clean.\u003c\/p\u003e\n\u003ch3\u003eWhat Are Reviewers Saying?\u003c\/h3\u003e\n\u003cdiv class=\"ec-blockquote\"\u003eMark Blackmore at The Audio Beat (February 2023) called the Evoke 50 a rare find — a great speaker at a fair price. He praised its outstanding soundstage depth, which he said rivaled dipole and panel speakers costing much more. He concluded that the Evoke 50 draws you in with strong bass, natural tone, and impressive imaging.\u003c\/div\u003e\n\u003cdiv class=\"ec-blockquote\"\u003eThe What Hi-Fi? team tested the Evoke 50 as part of a 5.1 system (July 2021) and awarded it 5 out of 5 stars. They highlighted the system’s consistent voicing across channels, along with detailed and agile bass performance. They called it both detailed and robust with dynamic urgency throughout the frequency range.\u003c\/div\u003e\n\u003cdiv class=\"ec-blockquote\"\u003eLowBeats (Germany) praised the Evoke 50 for its precise yet full bass response and its refined overall sound. They rated it “Outstanding” and noted the cabinet quality is well above average for its price class.\u003c\/div\u003e\n\u003ch3\u003eWho Is This Best For?\u003c\/h3\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/2714.svg\" alt=\"✔️\" width=\"15\"\u003e You want a full-range speaker that fills a medium to large room without a subwoofer.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/2714.svg\" alt=\"✔️\" width=\"15\"\u003e You listen to a wide range of music — from classical to rock to jazz — and want a speaker that handles it all.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/2714.svg\" alt=\"✔️\" width=\"15\"\u003e You value natural, honest sound over flashy or hyped presentation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/2714.svg\" alt=\"✔️\" width=\"15\"\u003e You want a speaker that looks elegant in your living room — not just your listening room.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/2714.svg\" alt=\"✔️\" width=\"15\"\u003e You are building a two-channel stereo system or a multichannel home cinema setup.\u003c\/p\u003e\n\u003ch3\u003eHow Does It Connect to Your System?\u003c\/h3\u003e\n\u003cp\u003eThe Evoke 50 connects with a single pair of gold-plated binding posts on the back of each speaker. These accept bare wire (up to 10AWG), banana plugs, or spade connectors.\u003c\/p\u003e\n\u003cp\u003eYou will need an amplifier or receiver to drive these speakers. The Evoke 50 has a sensitivity of 87 dB and a nominal impedance of 4 ohms (minimum 3 ohms at 100 Hz). A good quality integrated amp or receiver rated for 4-ohm loads will work well. Dynaudio designs the impedance curve to be easier to drive than the spec might suggest, so most mid-range and up amps will be comfortable.\u003c\/p\u003e\n\u003cp\u003eKeep in mind, these are passive speakers — they do not have a built-in amp. You need a separate amp to power them. If you need help choosing one, give us a call at \u003ca href=\"tel:+18009420220\"\u003e800-942-0220\u003c\/a\u003e.\u003c\/p\u003e\n\u003c!-- SECTION 3H: WHAT'S IN THE BOX --\u003e\n\u003ch2\u003eWhat’s in the Box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDynaudio Evoke 50 floorstanding speaker (single)\u003c\/li\u003e\n\u003cli\u003eOutrigger stabilizer feet with rubber pads (for hard floors)\u003c\/li\u003e\n\u003cli\u003eAdjustable spikes (for carpeted floors)\u003c\/li\u003e\n\u003cli\u003eTwo-part foam bass port plugs\u003c\/li\u003e\n\u003cli\u003eTweeter protection cover\u003c\/li\u003e\n\u003cli\u003eOwner’s manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNote: Speaker cable is not included. Sold as a single speaker — order two for a stereo pair.\u003c\/em\u003e\u003c\/p\u003e\n\u003c!-- SECTION 3J: PROFESSIONAL REVIEWS --\u003e\n\u003ch2\u003eWhat the Experts Are Saying\u003c\/h2\u003e\n\u003cdiv class=\"ec-blockquote\"\u003e\n\u003cstrong\u003eThe Audio Beat\u003c\/strong\u003e — Mark Blackmore — February 2023\u003cbr\u003eBlackmore spent extensive time with the Evoke 50 and found its soundstage depth to rival dipole and panel speakers at higher price points. He praised the taut, powerful bass with excellent pitch definition, natural instrument timbre, and an engaging overall presentation. He concluded the Evoke 50 is a rare combination of great sound and fair price.\u003c\/div\u003e\n\u003cdiv class=\"ec-blockquote\"\u003e\n\u003cstrong\u003eWhat Hi-Fi?\u003c\/strong\u003e — 5\/5 Stars — July 2021\u003cbr\u003eWhat Hi-Fi? awarded the Evoke 50 five out of five stars when testing it as part of a 5.1 system. They highlighted the speaker’s rhythmic tautness across the frequency range, its agile bass, and its detailed yet robust character. They called it a great place to start for anyone looking to bring a proper cinema feel home.\u003c\/div\u003e\n\u003cdiv class=\"ec-blockquote\"\u003e\n\u003cstrong\u003eLowBeats\u003c\/strong\u003e (Germany) — Outstanding — 2019\u003cbr\u003eLowBeats rated the Evoke 50 “Outstanding” and praised its bass for being both rich and precise — not the exaggerated, boomy bass often found at this price. They noted excellent spatial imaging and a warm yet detailed sound character. Cabinet quality was called well above average.\u003c\/div\u003e\n\u003c!-- SECTION 3E: PAIRS WELL WITH --\u003e\n\u003ch2\u003ePairs Well With\u003c\/h2\u003e\n\u003cp\u003eBuilding your system? Here are some great companions for the Evoke 50.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplifiers\u003c\/strong\u003e — A quality integrated amp rated for 4-ohm speakers will pair beautifully. Browse our \u003ca href=\"%%GLOBAL_ShopPathSSL%%\/subcat.asp?subcat_id=10\"\u003eIntegrated Amplifiers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStreaming Sources\u003c\/strong\u003e — Feed your Evoke 50 system with a dedicated streamer or network player. See our \u003ca href=\"%%GLOBAL_ShopPathSSL%%\/subcat.asp?subcat_id=23\"\u003eMusic Streamers\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker Cables\u003c\/strong\u003e — Good cables make a difference. The Evoke 50 accepts banana plugs, spades, or bare wire. Check out our \u003ca href=\"%%GLOBAL_ShopPathSSL%%\/subcat.asp?subcat_id=67\"\u003eSpeaker Cables\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofers\u003c\/strong\u003e — The Evoke 50 reaches down to 35 Hz on its own, but for home theater or deep-bass music, a sub like the Dynaudio Sub 6 can add even more impact. Browse our \u003ca href=\"%%GLOBAL_ShopPathSSL%%\/subcat.asp?subcat_id=7\"\u003eSubwoofers\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- SECTION 3F: FEATURES \u0026 SPECIFICATIONS --\u003e\n\u003ch2\u003eFeatures \u0026amp; Specifications\u003c\/h2\u003e\n\u003ch3\u003eCerotar Tweeter with Hexis Inner Dome\u003c\/h3\u003e\n\u003cp\u003eThe 28mm soft-dome tweeter uses Dynaudio’s Cerotar design, borrowed from their flagship Confidence series. Behind the main dome sits the Hexis — an inner dome that controls air pressure and stops unwanted resonances. You get smooth, clean highs with lots of fine detail.\u003c\/p\u003e\n\u003ch3\u003eDedicated Contour-Derived Midrange\u003c\/h3\u003e\n\u003cp\u003eThe Evoke 50 is the only speaker in the Evoke family with its own midrange driver. This 15cm unit comes straight from Dynaudio’s higher-end Contour range. It uses a neodymium magnet — a strong, light magnet that gives the driver fast, accurate response. Vocals and instruments sound natural and present.\u003c\/p\u003e\n\u003ch3\u003eTwin MSP Woofers for Deep, Controlled Bass\u003c\/h3\u003e\n\u003cp\u003eTwo 18cm woofers share the low-frequency work. They are made from MSP (Magnesium Silicate Polymer) — Dynaudio’s own cone material that balances light weight, stiffness, and damping. Copper voice coils handle high power. The result is bass that goes deep (down to 35 Hz) while staying tight and controlled.\u003c\/p\u003e\n\u003ch3\u003eAdjustable Bass Port with Foam Plugs\u003c\/h3\u003e\n\u003cp\u003eThe rear-firing bass port comes with two-part foam plugs. Use them to tune bass for your room: fully open for maximum bass, half-open for a slight reduction, or fully closed for a tighter, sealed sound. This is helpful if your speakers sit close to a wall.\u003c\/p\u003e\n\u003ch3\u003eElegant Danish Design\u003c\/h3\u003e\n\u003cp\u003eDesigned by Louise Dalgaard and her team at Dynaudio, the Evoke 50 has a slim, tapered cabinet with gently curved front edges and no visible mounting screws. The cabinet is narrower at the back than the front, which reduces standing waves inside. Available in four finishes: Black High Gloss, White High Gloss, Walnut Wood, and Blonde Wood.\u003c\/p\u003e\n\u003ch3\u003e100% Made in Denmark\u003c\/h3\u003e\n\u003cp\u003eEvery driver in the Evoke 50 is designed and built in Dynaudio’s own factory in Skanderborg, Denmark. Cabinets are crafted at their dedicated cabinet facility in Vejle. This level of in-house manufacturing is rare and ensures tight quality control from start to finish.\u003c\/p\u003e\n\u003ch3\u003eQuick-Reference Specifications\u003c\/h3\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; font-size: 0.92em; margin-top: 16px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #f0f4f8;\"\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eSpeaker Type\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003e3-Way Floorstanding (Bass Reflex, Rear Ported)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eTweeter\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003e28mm Cerotar Soft Dome with Hexis Inner Dome\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f0f4f8;\"\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eMidrange\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003e15cm MSP with Neodymium Magnet (Contour-derived)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eWoofers\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003e2× 18cm MSP with Ferrite+ Magnet, Copper Voice Coils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f0f4f8;\"\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eCrossover Frequencies\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003e430 Hz \/ 3,500 Hz (3rd\/2nd order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eFrequency Response\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003e35 Hz – 23 kHz (±3 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f0f4f8;\"\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eSensitivity\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003e87 dB (2.83V \/ 1m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eImpedance\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003e4 ohms nominal (3 ohms minimum at 100 Hz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f0f4f8;\"\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eIEC Power Handling\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003e260 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eConnections\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003eSingle pair gold-plated binding posts (banana, spade, or bare wire)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f0f4f8;\"\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eDimensions (H × W × D)\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003e1,140 × 215 × 307 mm (44.9” × 8.5” × 12.1”) — cabinet only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eDimensions with Feet (H × W × D)\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003e1,166 × 306 × 375 mm (45.9” × 12.1” × 14.8”) with rubber feet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f0f4f8;\"\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003e26.9 kg (59.3 lbs) each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eFinishes\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003eBlack High Gloss, White High Gloss, Walnut Wood, Blonde Wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f0f4f8;\"\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eMade In\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003eDenmark\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c!-- SECTION 3G: FAQ --\u003e\n\u003cdiv class=\"product-faq gsbp-ab3b28d\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat kind of amp do I need for the Evoke 50?\u003c\/h3\u003e\n\u003cp\u003eYou need an amplifier or receiver that is comfortable driving a 4-ohm speaker. A quality integrated amp with 50 watts or more per channel will work well. Dynaudio designs the impedance curve to be smoother than the spec suggests, so most mid-range amps will handle them just fine. If you are not sure, give us a call and we will help you choose.\u003c\/p\u003e\n\u003ch3\u003eDo I need a subwoofer with the Evoke 50?\u003c\/h3\u003e\n\u003cp\u003eFor most music listening, no. The Evoke 50 reaches down to 35 Hz, which covers the vast majority of musical content. For home theater with deep movie bass effects, or if you really love deep sub-bass in electronic music, adding a subwoofer can help. But most listeners find the Evoke 50’s bass is plenty on its own.\u003c\/p\u003e\n\u003ch3\u003eHow far from the wall should I place them?\u003c\/h3\u003e\n\u003cp\u003eDynaudio suggests pulling the speakers at least 20–50 cm (8–20 inches) from the rear wall. If you must place them closer, use the included foam port plugs to reduce bass buildup. The half-open setting is a good starting point for near-wall placement.\u003c\/p\u003e\n\u003ch3\u003eHow does the Evoke 50 compare to the Evoke 30?\u003c\/h3\u003e\n\u003cp\u003eThe Evoke 50 is the larger model. It has a dedicated midrange driver (the Evoke 30 does not) and twin woofers instead of two combined midrange\/bass drivers. This gives the Evoke 50 deeper bass, more output, and better driver separation. The Evoke 30 is a great choice for smaller rooms. The Evoke 50 shines in medium to large spaces.\u003c\/p\u003e\n\u003ch3\u003eAre the speakers sold as a pair or individually?\u003c\/h3\u003e\n\u003cp\u003ePricing and availability may vary. Check the product listing for current details. You will need two speakers for a stereo pair.\u003c\/p\u003e\n\u003ch3\u003eCan I use these for home theater?\u003c\/h3\u003e\n\u003cp\u003eYes. The Evoke 50 works as front left\/right speakers in a surround sound system. Dynaudio makes matching center (Evoke 25C) and bookshelf (Evoke 10) speakers for the rest of your channels.\u003c\/p\u003e\n\u003ch3\u003eWhat finishes are available?\u003c\/h3\u003e\n\u003cp\u003eThe Evoke 50 comes in four finishes: Black High Gloss, White High Gloss, Walnut Wood, and Blonde Wood. The gloss finishes use a special lacquering technique for a deep, glass-like look. The wood finishes use real open-pore veneers.\u003c\/p\u003e\n\u003ch3\u003eDo they come with grilles?\u003c\/h3\u003e\n\u003cp\u003eThe Evoke 50 does not ship with removable grilles. The drivers are flush-mounted with no visible screws, giving the speaker a clean look without a grille. A tweeter protection cover is included for use during shipping or storage.\u003c\/p\u003e\n\u003ch3\u003eHow long does break-in take?\u003c\/h3\u003e\n\u003cp\u003eDynaudio speakers improve with use. Most listeners report the sound opening up after a couple weeks of regular playing. They will sound good right away but will get even better with time.\u003c\/p\u003e\n\u003ch3\u003eWhat else do I need to get started?\u003c\/h3\u003e\n\u003cp\u003eYou need an amplifier (integrated amp or receiver), a source (streamer, turntable, or CD player), and speaker cables. If you want help building a complete system, call us at \u003ca href=\"tel:+18009420220\"\u003e800-942-0220\u003c\/a\u003e. We love helping with this.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- SECTION 3I: VIDEO SECTION --\u003e\n\u003ch3\u003eSee It in Action\u003c\/h3\u003e\n\u003cp\u003eDynaudio’s own Roland Hoffman walks through the entire Evoke range, including the Evoke 50’s unique midrange driver, Cerotar tweeter, and design philosophy.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"A Complete Guide to the Dynaudio Evoke\" src=\"https:\/\/www.youtube.com\/embed\/YkZN8-bQpHE\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003c!-- NOTE: Verify this YouTube embed ID before publishing. Search \"A complete guide to the new Dynaudio Evoke\" on YouTube to confirm. --\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!-- SECTION 3K: WHY BUY FROM AUDIO ADVISOR --\u003e\n\u003ch2\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cdiv class=\"ec-titlebox-text\"\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/1f3b5.svg\" alt=\"music note emoji\" width=\"20\"\u003e \u003cstrong\u003e40+ Years of Expertise\u003c\/strong\u003e — Since 1981, we’ve helped over a million music lovers find the right gear.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/1f504.svg\" alt=\"repeat emoji\" width=\"20\"\u003e \u003cstrong\u003e60-Day Money-Back Guarantee\u003c\/strong\u003e — Take your time. Listen, enjoy, and make sure it’s right for you.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/1f4de.svg\" alt=\"phone emoji\" width=\"20\"\u003e \u003cstrong\u003eReal Experts, Real Help\u003c\/strong\u003e — Our team is here to answer your questions at \u003ca href=\"tel:8009420220\"\u003e800-942-0220\u003c\/a\u003e, weekdays 9am–6pm EST.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/1f69a.svg\" alt=\"truck emoji\" width=\"20\"\u003e \u003cstrong\u003eFree Shipping\u003c\/strong\u003e — On orders over $49, delivered to your door.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/1f4b3.svg\" alt=\"credit card emoji\" width=\"20\"\u003e \u003cstrong\u003eFlexible Payment Options\u003c\/strong\u003e — Financing available so you can start listening now.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- SECTION 3L: LEARNING CENTER LINK --\u003e\n\u003ch3\u003eLearn More About Speakers\u003c\/h3\u003e\n\u003cp\u003eWant to learn more about choosing the right speakers for your room? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\/\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and expert advice.\u003c\/p\u003e","brand":"DYNAUDIO","offers":[{"title":"New","offer_id":46016975208621,"sku":"NEW-DYEVOKE50-BLNDWD-SIN","price":2749.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/DYEVOKE50_BLO_01-Large__04144.1778774620.1280.1280.jpg?v=1781095175","url":"https:\/\/www.audioadvisor.com\/products\/dynaudio-evoke-50-floorstanding-speaker-blonde-wood-each","provider":"Audio Advisor","version":"1.0","type":"link"}