{"product_id":"pangea-audio-premier-se-interconnect-cable-rca-to-rca-2-0-meter-subwoofer-single","title":"Pangea Audio Premier SE Interconnect Cable - RCA to RCA - 2.0 Meter - Single","description":"\u003ch2\u003eWhat You Need to Know\u003c\/h2\u003e\n\u003ch3\u003eWhat Is an Interconnect Cable and What Does It Do?\u003c\/h3\u003e\n\u003cp\u003eAn interconnect is an analog signal cable. It carries a line-level audio signal — the output of a DAC, CD player, streamer, preamp, or other source component — to the next component in your chain. Every time you connect a source to a preamp, or a preamp to an amplifier, an interconnect is the link.\u003c\/p\u003e\n\u003cp\u003eThe signal it carries is delicate. It's an analog waveform — a constantly varying voltage that represents the music. Unlike a digital cable, which carries ones and zeros that either arrive correctly or don't, an analog signal can pick up noise and interference along the way. The cable's job is to deliver that signal cleanly, without adding anything that wasn't in the original recording.\u003c\/p\u003e\n\u003cp\u003eThe Premier SE is Pangea Audio's Signature Edition interconnect — the \"SE\" designation marks cables built with upgraded conductor materials above the standard line. It was designed by Jay Victor, a cable engineer with more than four decades of experience in audio cable design.\u003c\/p\u003e\n\u003ch3\u003eSingles and Pairs — Which Do You Need?\u003c\/h3\u003e\n\u003cp\u003eStandard stereo audio has two channels: left and right. A stereo pair of interconnects carries both channels at once — one cable per channel. That is how most source-to-preamp and preamp-to-amplifier connections are made. When you buy a pair, you get two matched cables built from the same materials and to the same spec.\u003c\/p\u003e\n\u003cp\u003eA single interconnect is one cable carrying one channel. Singles are used for mono connections — such as a subwoofer output, a center-channel amplifier feed in a home theater system, or any other setup where only one channel is needed between two components.\u003c\/p\u003e\n\u003cp\u003eIf you're connecting a stereo source to a stereo preamp or integrated amplifier, you almost always need a pair. If you're connecting a single subwoofer output or a mono source, one single is the right choice. Not sure? Give us a call at 800-942-0220 and we'll help you figure it out.\u003c\/p\u003e\n\u003ch3\u003eThe Engineering Behind the Premier SE\u003c\/h3\u003e\n\u003cp\u003eThe signal conductor is Cardas Grade One Copper — a high-purity copper developed by George Cardas of Cardas Audio. It is drawn slowly, with annealing — a heat-treatment process — applied between each drawing stage. Annealing relieves stress in the metal and removes impurities, leaving a purer, more consistent conductor throughout its length.\u003c\/p\u003e\n\u003cp\u003eThe cable's internal geometry follows Jay Victor's proprietary Multi-Gauge Conductor Design. Different conductor gauges — wire thicknesses — are assigned to different roles within the signal path. Pangea Audio does not publish the exact formula; the geometry is proprietary to Jay Victor. What it represents is a design approach built on decades of experimentation, not a generic configuration.\u003c\/p\u003e\n\u003cp\u003eAccording to Pangea Audio, the Premier SE takes full advantage of the latest materials and technology in Jay Victor's highly evolved cable design. Each generation of this cable reflects refinements based on Victor's ongoing development work — not a static product that has sat unchanged on the shelf.\u003c\/p\u003e\n\u003cp\u003eThe connectors, shielding, and jacket are part of what makes any cable work as a complete system. The specific construction details for the Premier SE's connectors and shielding should be confirmed from Pangea Audio's current spec sheet before publishing — see the Notes section. What we can say with confidence is that this cable is built to a deliberate engineering standard, using high-purity conductor material and a geometry developed by one of the more experienced minds in the field.\u003c\/p\u003e\n\u003ch3\u003eWhere Does This Cable Belong in Your System?\u003c\/h3\u003e\n\u003cp\u003eThe Premier SE interconnect belongs anywhere in your signal chain where two components need to be connected by analog audio. The most common connections are DAC to preamp, CD player to integrated amplifier, preamp to power amplifier, or phono stage to preamp (for line-level phono stage outputs only — not the phono-level output direct from a turntable, which requires a dedicated phono cable).\u003c\/p\u003e\n\u003cp\u003eIt is available in multiple lengths to fit a range of rack configurations. Choose the shortest length that reaches comfortably between your components. Shorter cables keep the signal path tight and give outside interference less opportunity to couple into the conductor.\u003c\/p\u003e\n\u003cp\u003eIf your components have balanced XLR connections, verify whether this cable is offered in an XLR configuration — see the Notes section. Balanced connections use a different wiring scheme that can better reject noise over longer cable runs, and if your components support it, it may be worth using.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; font-size: 0.92em; margin-top: 16px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background: #f0f4f8;\"\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd; width: 45%;\"\u003eCable Type\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003eAnalog stereo interconnect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd;\"\u003eAvailable Configurations\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003eSingle (one cable, one channel); Pair (two matched cables, stereo)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background: #f0f4f8;\"\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd;\"\u003eConnector Type\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003eRCA (unbalanced)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 8px 12px; font-weight: 600; border-bottom: 1px solid #ddd;\"\u003eSignal Conductor\u003c\/td\u003e\n\u003ctd style=\"padding: 8px 12px; border-bottom: 1px solid #ddd;\"\u003eCardas Grade One Copper; Jay Victor's proprietary Multi-Gauge Conductor Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\n\u003cbr\u003eWhy We Like It\u003c\/h2\u003e\n\u003cp\u003e✔ \u003cstrong\u003eCardas Grade One Copper conductors\u003c\/strong\u003e — A high-purity copper developed by George Cardas through a slow-draw, annealed process. The same conductor material used in Pangea's top-tier phono and power cables.\u003c\/p\u003e\n\u003cp\u003e✔ \u003cstrong\u003eJay Victor's Multi-Gauge Conductor Design\u003c\/strong\u003e — A proprietary geometry developed over more than four decades of cable engineering. Different conductor gauges handle different roles within the signal path — a detail that goes well beyond what you'll find in a generic interconnect.\u003c\/p\u003e\n\u003cp\u003e✔ \u003cstrong\u003eContinuously evolved design\u003c\/strong\u003e — According to Pangea Audio, the Premier SE reflects the latest refinements in Jay Victor's cable design work. This is not a static product — it incorporates ongoing development.\u003c\/p\u003e\n\u003cp\u003e✔ \u003cstrong\u003eAvailable as singles or matched pairs\u003c\/strong\u003e — Buy what you actually need. Pairs for stereo runs; singles for subwoofers, mono feeds, or single-channel applications.\u003c\/p\u003e\n\u003cp\u003e✔ \u003cstrong\u003eMultiple lengths available\u003c\/strong\u003e — Choose the length that fits your rack cleanly. Shorter is almost always better when the components allow it.\u003c\/p\u003e\n\u003cp\u003e✔ \u003cstrong\u003eSE designation — Signature Edition materials\u003c\/strong\u003e — The SE name means upgraded conductor materials above Pangea's standard offering. Not a badge — a build standard.\u003c\/p\u003e\n\u003cdiv class=\"product-faq gsbp-ab3b28d\"\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003chr\u003e\n\u003ch3\u003eWhat's the difference between balanced (XLR) and unbalanced (RCA) connections?\u003c\/h3\u003e\n\u003cp\u003eAn unbalanced RCA connection uses two conductors: one for the signal and one for the ground return. A balanced XLR connection uses three conductors: a positive signal, a negative (inverted) signal, and a ground. The balanced approach allows the receiving component to compare the two signal conductors and cancel out any noise that has crept in equally on both — a technique called common-mode rejection. For most home audio setups with short cable runs between components on the same rack, unbalanced RCA works well. Balanced XLR earns its advantage in longer runs or in noisier electrical environments. If your components have both options, try balanced first.\u003c\/p\u003e\n\u003ch3\u003eShould I buy a single or a pair?\u003c\/h3\u003e\n\u003cp\u003eFor stereo connections — connecting a DAC to a preamp, a preamp to a power amplifier, or any two-channel source to a two-channel destination — you need a pair. Each cable carries one channel, so stereo requires two. A single interconnect is for mono connections: a subwoofer output, a mono amplifier feed, or any application where only one channel passes between the two components. If you're not sure, give us a call at 800-942-0220.\u003c\/p\u003e\n\u003ch3\u003eHow long a cable do I need?\u003c\/h3\u003e\n\u003cp\u003eMeasure the distance between the output jacks on one component and the input jacks on the other. Add a modest amount of slack for clean routing — you don't want the cable under tension at the connector. Then choose the shortest length in our lineup that fits without pulling tight. Shorter interconnects keep the signal path compact and reduce the amount of conductor exposed to outside interference. For components on the same shelf or adjacent shelf positions, 0.5 m to 1.0 m is usually the right range.\u003c\/p\u003e\n\u003ch3\u003eWhat is Cardas Grade One Copper, and why does it matter for an interconnect?\u003c\/h3\u003e\n\u003cp\u003eCardas Grade One Copper is a high-purity copper material developed by George Cardas, founder of Cardas Audio and one of the most respected figures in audio cable design. It is produced using a slow-draw manufacturing process with annealing — a heat treatment — applied between each drawing stage. Annealing relieves stress in the metal and removes impurities that would otherwise be locked into the conductor. The result is a more consistent, more conductive material than standard copper wire. Pangea Audio uses it across their Premier SE and Premier XL cable families.\u003c\/p\u003e\n\u003ch3\u003eWhat is Jay Victor's Multi-Gauge Conductor Design?\u003c\/h3\u003e\n\u003cp\u003eJay Victor is a veteran audio cable engineer with over four decades of experience. His Multi-Gauge Conductor Design assigns different wire gauges — different thicknesses — to different roles within the cable's signal path. The exact formula is proprietary and not publicly disclosed by Pangea Audio. Victor has described the concept in broad terms as using conductors optimized for different frequency ranges, while noting that even that is a simplification of the full design. What it represents is a deliberate, experience-driven geometry — not a standard off-the-shelf wire configuration.\u003c\/p\u003e\n\u003ch3\u003eHow does this compare to a less expensive interconnect?\u003c\/h3\u003e\n\u003cp\u003eA budget interconnect typically uses standard oxygen-free copper (OFC) wire, basic PE or PVC insulation, a single layer of shielding, and mass-produced connectors with plated-steel contacts. The Premier SE uses Cardas Grade One Copper — a high-purity conductor produced through a more demanding manufacturing process — and a proprietary conductor geometry developed over decades of engineering work. The construction difference is real and verifiable. Whether it produces an audible improvement in your specific system is something we cannot promise. What we can say is that it's built with considerably more care and better raw materials than a generic cable at a lower price point.\u003c\/p\u003e\n\u003ch3\u003eCan I use this cable to connect my turntable to my phono stage?\u003c\/h3\u003e\n\u003cp\u003eNot directly — and this is an important distinction. The Premier SE is a line-level interconnect. It is designed for the stronger signals passed between a DAC, CD player, preamp, or amplifier. A turntable outputs a phono-level signal — much weaker and much more noise-sensitive than a line-level signal. That connection requires a dedicated phono cable, which typically includes an integrated ground wire and heavier shielding. Pangea Audio makes phono-specific cables for that job. If you're connecting a turntable, give us a call at 800-942-0220 and we'll point you to the right cable.\u003c\/p\u003e\n\u003ch3\u003eDoes this cable come in a balanced XLR version?\u003c\/h3\u003e\n\u003cp\u003e[Verify with Pangea Audio whether an XLR version of the Premier SE interconnect is offered. If yes: populate this answer with connector type, pin configuration, and any construction differences from the RCA version. If no XLR version exists, remove this FAQ entry. Do not publish a placeholder answer.]\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eWhy Audio Advisor?\u003c\/h2\u003e\n\u003cdiv class=\"ec-titlebox-text\"\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/1f3b5.svg\" alt=\"music note emoji\" width=\"20\"\u003e \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e40+ Years of Expertise\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— Since 1981, we’ve helped over a million music lovers find the right gear.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/1f504.svg\" alt=\"repeat emoji\" width=\"20\"\u003e \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e60-Day Money-Back Guarantee\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— Take your time. Listen, enjoy, and make sure it’s right for you.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/1f4de.svg\" alt=\"phone emoji\" width=\"20\"\u003e \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eReal Experts, Real Help\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— Our team is here to answer your questions at\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"tel:8009420220\"\u003e800-942-0220\u003c\/a\u003e, weekdays 9am–6pm EST.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/1f69a.svg\" alt=\"truck emoji\" width=\"20\"\u003e \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFree Shipping\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— On orders over $49, delivered to your door.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"emoji\" role=\"img\" draggable=\"false\" src=\"https:\/\/s.w.org\/images\/core\/emoji\/17.0.2\/svg\/1f4b3.svg\" alt=\"credit card emoji\" width=\"20\"\u003e \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eFlexible Payment Options\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e— Financing available so you can start listening now.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003eNew to interconnects, or trying to figure out whether balanced or unbalanced is right for your system? Visit our \u003ca href=\"https:\/\/learningcenter.audioadvisor.com\"\u003eLearning Center\u003c\/a\u003e for guides, tips, and plain-English explanations from our team.\u003c\/p\u003e","brand":"Pangea Audio","offers":[{"title":"Single \/ 2.0 Meter","offer_id":45983233540269,"sku":"NEW-PGICCASRR-2SRCRC","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0750\/3708\/1773\/files\/PGICCASRR_01_2024__30370.1724253850.1280.1280_829b83af-c7aa-4ccd-aac3-fa73e374bdf1.jpg?v=1778119489","url":"https:\/\/www.audioadvisor.com\/products\/pangea-audio-premier-se-interconnect-cable-rca-to-rca-2-0-meter-subwoofer-single","provider":"Audio Advisor","version":"1.0","type":"link"}