"Recommended Component" Class A, 2010 - Stereophile

"Reviewers' Choice" Award Winner 2009 - Home Theater Sound Magazine

Five-Channel Version of a Flexible Modular Amplifier

The Bryston 9B SST² multi-channel power amplifier doesn't just offer the sound quality, performance, ease-of-use, and longevity that has made Bryston one of the most trusted brands in the world. It also provides unparalleled flexibility.

Stereophile was so impressed with the 9B SST² that it honored the amp with a 'Class A' listing in its coveted "Recommended Component" listing for 2010.

The 9B SST² is a modular, single-chassis power amplifier delivering 140 Watts per channel into 8 Ohms. That word 'modular' is critically important here. Like other models in the SST² series, the 9B employs modular construction in which each channel is self contained with audio circuitry, connectors, and an independent power supply. However, the 9B channel module differs in that it is built on its own removable assembly. This means that not only may any channel be easily swapped in the unlikely event of failure, but also that the 9B may be configured with fewer channels if an application so requires.

Indeed, the 9B SST2 may be ordered in a 3, 4 or 5 channel version. Modular channels are available separately for later expansion.

The 9B SST² is a "Reviewers' Choice" Award Winner for 2009 in the November 2009 issue of Home Theater Sound magazine. Howard Kneller calls it "the best multichannel amp I've heard." He goes on to say, "During my time with it, the 9B earned my lust, my respect, and ultimately, my love. Many amplifiers can evoke one or two of these emotions, but it’s a rare breed that summons all three.

"The Performance Sucked Me In"

"With big multichannel amps, people tend to focus on raw power and bass-both of which are abundant with the 9B SST," notes Chris Lewis in Home Theatermagazine. "However, as I switched over to multichannel music, it was this amp's performance with midrange and high frequencies that sucked me in."

"Handles Every Kind of Sound Perfectly"

"The laboratory results are sheer delight. For the 80 attainable points for tonal quality, the Bryston combination achieved a full 78, and the two missing points are really a theoretical margin rather than an appropriate criticism," reports Germany's AudioVisionmagazine, April 2004. "That the Bryston combination is able to handle every kind of sound perfectly was ultimately also confirmed by the listening test."

"Uncompromising Construction"

"The uncompromising construction of the Bryston five channel power amplifier promises prolonged hearing enjoyment," observes Germany's AUDIOphile magazine for January 2004. Soundwise it ranks above its predecessor by allowing more of the music to come through, and by providing still more air in the middles and highs."

Bryston SST² C-Series Upgrades

Bryston's SST² C-series amplifiers are the direct results of the company's ongoing quest to improve its already legendary SST C-Series product line.

For over 30 years, Bryston has committed itself to designing and manufacturing the most accurate and reliable audio electronics. The performance, value, and reliability of Bryston amplifiers, and the unrivaled warranty, have earned the company critical acclaim and awards worldwide.

Bryston maintains an extensive research and development program, constantly investigating techniques, technologies, and devices that promise improvements to all aspects of its amplifiers. The Bryston SST² C–Series is the direct result of this ongoing quest, and represents a significant step forward in the art and science of audio amplification.

The SST² C-series answers the need for today's increased dynamic range and clarity in recordings and movie soundtracks. The end result surpasses the parameters of the most demanding material available.

Upgrades over the previous series include new power supply transformer design plus a new power supply board, push on/off power switches, enhanced chassis design, new 'Soft-Start' circuitry, and new balanced input stage. This series also offers a bridging mode performance improvement, reduced point-to-point wiring, reduced circuit board count, and a redesigned output choke.

Design Philosophy Ensures Sonic Superiority

From input to output, all the circuitry has been optimized for the most accurate performance possible. All analog signal circuitry is fully discrete to avoid the compromises, phase shift, and non-linearities inherent in IC's. The amplifiers incorporate an innovative gain stage topology, which yields a substantially lower noise floor through the use of low-impedance pathways within the amplifier, and has strong advantages in reducing overall distortion.

Bryston's computer controlled distortion analyzers confirm that IM distortion of less than 10 parts per million (below 0.0009%) are typical for this new circuitry. All SST amplifiers use Bryston's proprietary output stage, which we call "Quad-Complementary." The Quad-Complementary topology improves linearity to a new standard of accuracy, while virtually eliminating aggressive higher harmonic distortion products.

The overall harmonic distribution of Bryston's Quad-Complementary output stage closely approaches an ideal Class-A output, except that the overall distortion is actually much lower. (True class-A output stages suffer from relatively high current-induced distortion levels, consisting of mostly lower-order harmonics).

The listening characteristics display a high degree of transparency without harshness or grain. The annoyances previously ascribed to 'transistor sound' are absent, and the amplifier seems to combine the seductive lushness of tube equipment with the focus and accuracy of solid-state.

Modular Design/Independent Power Supplies

No matter how good an amplifier's signal path may be, it's meaningless if it's starved in the power supply, an all too common way of cutting costs. One of the things that makes the Bryston SST Series unusual is the company's insistence that every amplifier in the line have a completely separate and independent power supply for each channel, including its own toroidal transformer.

Bryston's research has shown that separate power supplies provide the best imaging, clarity, and dynamic range , all attributes that are especially crucial given the emerging and demanding high resolution digital sources. The power supplies employ multiple filter capacitors per channel, rather than single pairs of larger filter cans, allowing improved high frequency response, and reducing overall losses in the supply. In the 9B SST, and 6B SST models, Bryston carries the modular concept further, making the channels removable.

Superior Ingredients

Bryston uses only the finest components, such as 0.1% metal-film resistors, polypropylene capacitors, custom-wound toroidal transformers, and hand-matched transistors, to reduce noise and distortion to the absolute minimum. Gold-plated balanced or single-ended (RCA) input connectors are standard as well as gold-plated 5-way loudspeaker binding posts, to eliminate possible causes of distortion from corrosion. As befits products intended for use on stage as well as in the home, the SST chassis are extremely robust.

Feature Flexibility

SST amplifiers offer feature flexibility. For example, all allow a choice of input connection — balanced XLR-F, balanced 1/4" phone, or single-ended RCA jack — together with a switch to select gain settings. A trigger input allows system-wide on/off control. Overall, the SST Series itself facilitates flexibility in putting together the total system through a variety of channel and power output.

Unique Burn-In Procedure

For Each and every Bryston audio product undergoes an extensive quality control "burn-in" procedure. Following a complete operational checkout, every amplifier is placed on a test-bench and run for 100 hours at full output (one-hour on/one-hour off for additional thermal stress), with a high frequency square-wave input and a capacitive load. This extremely rigorous burn-in quickly "matures" components and weeds out any potential premature failures. The result is reliable trouble-free performance for many years.

Easy System Upgrades

Bryston designed the SST Series to take into account that systems change. There's a full range of channel and power options, several amplifiers may be operated in bridged mono mode, and the 9B SST may be ordered with as few as three channels, and later expanded up to five channels.

Technical Data (64k PDF)

• New cosmetics
• New Push on/off power switch
• 140 watts per channel at 8 ohms, 200 watts at 4 ohms
• Available in 3-, 4-, and 5-channel configurations
• New SST² output devices
• Increased power supply capacitance - 30,000 MFD per channel
• Selectable Balanced or Unbalanced inputs
• Lower noise and distortion
• Two New Independent ultra-low-noise power transformers
• New computer modeled heat-sink design
• Quick connect remote 12 volt trigger
• Selectable gain - 1 Volt or 2 Volt
• Available in Silver or black finish with 19 or 17 inch faceplate
• Manufacturer's 20-year limited warranty

• Power Output: 140 watts into 8 ohms, 200 watts into 4 ohms
• Gain Select and Sensitivity: 29 dB - 1.1Vin = 140W @ 8 Ohms -(1V Position); 23 dB - 2.2Vin = 140W @ 8 Ohms - (2V Position); 17dB - 4.4Vin = 140W @ 8 Ohms - (4V Position)
• Input Impedance: 50 K ohms Single ended; 20 K ohms balanced
• Distortion (IM or THD + noise): < 0.005% 20 Hz to 20 kHz at 120 watts into8 Ohms; <0.007% 20 Hz to 20 kHz at 200 watts into 4 ohms
• Noise: Measured with input shortened - 20 Hz to 20 kHz; >110 dB below rated output 29 dB gain (-73 dBu); >113 dB below rated output 23 dB gain (-76 dBu); >116 dB below rated output 17 dB gain (-79 dBu)
• Slew Rate: >60 volts per microsecond
• Power Bandwidth: <1 Hz to over 100kHz
• Damping Factor: Over 500 at 20 Hz, ref. 8 ohms
• Power Consumption and Heat Load: single channel 140W @ 8 ohms, 242 Watts; 5 channels @ 140W @ 8 ohms, 1397 Watts; Max. Heat Dissipation 8 ohms, 2720Btu/Hr.; single channel 200W @ 4 ohms, 422 Watt; 5 channels @ 200W @ 4 ohms, 2295 Watts; Max. Heat Dissipation 4 ohms, 4420Btu/Hr.; At Idle,192 Watts
• Dimensions: Rack Mount Version 19" wide, 5.25" high, 19" deep with handles; mounted rack depth - 17"; 17" Version - 17" wide, 5.25" high, 17.5" deep
• Weight: 76 lbs

"Reviewers' Choice" Award Winner 2009 - Home Theater Sound Magazine

"The Bryston 9B SST2 looks like a million bucks, and its rock-solid construction means it will likely see your kids through nursery school, kindergarten, grade school, college, and grad school. And it performs at a level that will scare the bejesus out of amps costing twice as much."

"During my time with it, the 9B earned my lust, my respect, and ultimately, my love. Many amplifiers can evoke one or two of these emotions, but it’s a rare breed that summons all three. All of which means that, in addition to earning my affections, the Bryston 9B SST2 has won a 'Reviewers' Choice' award as the best multichannel amp I’ve heard. Unconditionally recommended."

- Howard Kneller Home Theater Sound magazine, November 2009

"With big multichannel amps, people tend to focus on raw power and bass-both of which are abundant with the 9B SST. However, as I switched over to multichannel music, it was this amp's performance with midrange and high frequencies that sucked me in."

"The clarinet's timbre throughout Bucky Pizzarelli's outstanding Swing Live disc was as true as I've heard it. High notes hit with passion and attack but didn't drive you out of the room with hardness or excessive bite. The 9B SST slugged its way through Jerry Goldsmith's dense SACD rendering of 'The Generals' with little obvious effort, even at higher volumes. If you think 120 watts is a low power rating, don't worry. This amp has plenty of current and punch to fill rooms far larger than those it will likely be used in, and it does so without any compromise in dynamic range. 'The Generals' runs the gamut from loud to soft and dense to sparse, and the Bryston was ready with instant power and a massive, well-defined stage."

- Chris Lewis, Home Theatermagazine

"The laboratory results are sheer delight. For the 80 attainable points for tonal quality, the Bryston combination achieved a full 78, and the two missing points are really a theoretical margin rather than an appropriate criticism. That the Bryston combination is able to handle every kind of sound perfectly was ultimately also confirmed by the listening test."

"Delicately and at the same time powerfully the signal triumphed through our loudspeakers and did not hold back the slightest detail - true high end in its most forthright form."

"The Bryston equally fascinatingly reproduced movie sound tracks, no matter whether soft tones or room atmosphere was called for, or brutal bass heavy thunderstorms and directional effects all around. The reproduction pulled the listeners downright into the scenes."

- Germany's AudioVisionmagazine, April 2004

"The uncompromising construction of the Bryston five channel power amplifier promises prolonged hearing enjoyment. Soundwise it ranks above its predecessor by allowing more of the music to come through, and by providing still more air in the middles and highs."

- Germany's AUDIOphilemagazine, January 2004

How are components selected and installed in a Bryston product?

Starting with a bare circuit board each component is hand selected and installed, every wire is cut and bent by hand, every connection is hand soldered. Although Bryston could do the job much faster by employing wave-soldering machines typically used in large assembly operations, that would mean exposing the entire board to a molten-metal bath. This is a source of extreme heat shock that could result in long-term reliability problems. Bryston's focus on excellence just doesn't allow for these kinds of short-cuts.

How many hours does it take to build a Bryston product?

The skilled technicians that build Bryston products are not pressured by schedules or quotas. On average, it takes 30-35 person hours to assemble a single Bryston amplifier or preamplifier. The company believes in quality, not quantity.

What kind of product testing does Bryston do?

Frequent inspection and extensive testing are a critically important part of the Bryston assembly process.

Individual components, completed circuit-boards, sub-assemblies and final assemblies are all put through rigorous inspection and testing procedures. Are the soldering joints all clean? Is every component aligned properly? Is the internal wiring laid-out symmetrically and neatly? During every stage of production, quality and performance are checked - and rechecked - against exacting tolerances and specifications.

At the point of final assembly, many manufactures immediately pack their amplifiers into boxes for shipment. However, at Bryston, each of the fully assembled products is connected to what the company calls a "burn-in table." For example, during 100 hours of continuous testing, Bryston amplifiers are monitored through a range of input cycles and thermal stress levels to duplicate a broad spectrum of operational loads. If any failures occur, the company catches them here, before you begin using our product.

Then, and only then, are Bryston products sent to the final quality inspection area for a comprehensive and carefully documented test of all their functions. The printed results of this computer-aided analysis are actually shipped with each unit. During this intensive procedure, Bryston rejects any product that falls outside of advertised specifications, or an even narrower band of specifications used for internal testing. As a result, you can expect each Bryston product to perform as least twice as well as the advertised specifications.

The Bryston manufacturer's warranty is unprecedented in the consumer electronics market.

Bryston analog audio circuits are warranted to be free from manufacturing defects for twenty (20) years from the original date of manufacture. The warranty includes parts and labor.

Bryston Digital circuits and cables are warranted for five years from the original date of manufacture. The warranty includes parts and labor.

Bryston products having motorized moving parts, excluding motorized volume controls, are warranted for three years from the original date of manufacture. The warranty includes parts and labor.

In the event of a defect or malfunction, contact Bryston's repair centers for return authorization.