EAT E Glo I Integrated Amplifier
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
Two Amplifiers in One Chassis, Chosen by a Toggle
The E.A.T. E-Glo I is an all-tube integrated amplifier from the Austrian company better known for turntables and phono stages. Tubes do the work at every stage, not just the output. Four KT88 power tubes are joined by one 12AX7 and two 12AT7 small-signal tubes.
A front-panel toggle switches between ultralinear and triode operation while the music plays. Ultralinear gives 35 watts per channel and triode gives 18, both into 4 or 8 ohms, with separate taps on two sets of speaker posts.
Flip to Triode When the Room Goes Quiet
The two modes are genuinely different characters, and you do not have to commit to one at purchase. Auto bias with cathode feedback keeps the KT88s in range on their own, so there are no meters to read and no trimmers to adjust. Five line-level RCA inputs handle the sources, and a remote control comes in the box.
Built to Be Looked At, Not Hidden
This is a large component. It measures 435 x 170 x 485mm and weighs 26 kg, which is a little over 57 pounds. Real wood side panels frame the valve stage.
Why the Volume Knob Cost E.A.T. So Much
Most of the engineering budget went somewhere you cannot see. Instead of a potentiometer, the E-Glo I uses a relay attenuator built as two independent blocks, one per channel, with gain in 1 dB steps across a 63 dB range.
E.A.T. quotes left-to-right channel tracking within 0.05 dB. When the channels stay matched at every volume setting, the stereo image stays where the recording put it instead of drifting toward one speaker.
Where the Output Transformer Earns Its Keep
E.A.T. winds the output transformer with several bifilar windings in sections to widen the power bandwidth. Frequency range runs 10Hz to 50kHz within half a decibel at 5 watts, with distortion below 0.05% at 1kHz. Signal-to-noise is quoted above 95 dB.
What Reviewers Are Saying
Ken Micallef reviewed the E-Glo I for Stereophile on December 2, 2020. He wrote that it "gets so many things right in such a balanced, forceful presentation that I'd say it's worth its asking price", and closed with "Enthusiastically recommended."
Ken Kessler reviewed it for Hi-Fi News on November 2, 2020. He described "inherent, undeniable warmth and truly vast soundstage properties" and called it a valve amplifier that is warmer still in triode mode.
Who Is This Integrated Amplifier Best For?
- You want to hear the difference modes make — ultralinear and triode on a toggle, switchable while the music plays
- You own efficient speakers — 35 watts suits sensitive designs, and both 4 and 8 ohm taps are provided
- You do not want tube maintenance — auto bias with cathode feedback handles the KT88s without meters or trimmers
- The amplifier is part of the room — real wood side panels and an exposed valve stage, built to be seen
- If you play records, the E-Glo I has line inputs only and no phono stage — E.A.T.'s own E-Glo Petit 2 is the matching tube phono preamplifier
How Does It Connect to Your System?
Match your speakers to the 4 or 8 ohm taps on either set of posts. Sources go to the five RCA inputs, and a turntable needs a phono preamp first.
Pairs Well With
Building a system around the E-Glo I? Start here:
- Bookshelf speakers — sensitive standmounters suit 35 tube watts: bookshelf speakers
- Floorstanding speakers — check sensitivity before you commit: floorstanding speakers
- Turntables — E.A.T. built its name here: turntables
- Speaker cables — two sets of posts, so plan the runs: speaker cables
Frequently Asked Questions
What is the difference between triode and ultralinear mode?
They are two ways of running the same output tubes. Ultralinear gives 35 watts per channel, triode gives 18. The toggle switches between them while the music plays, so you can compare on the spot.
Can I connect a turntable?
Not directly. All five inputs are line level, so a turntable needs an external phono preamplifier. E.A.T.'s E-Glo Petit 2 is the in-house tube option.
Do I have to bias the tubes?
Auto bias with cathode feedback sets the operating point for the four KT88s, so there is nothing to measure or adjust as the tubes settle in.
Will 35 watts drive my speakers?
It depends on sensitivity more than size. Speakers rated around 88 dB and up are the safer match, and both 4 and 8 ohm taps are provided.
What warranty does it carry?
Two years parts and labor on the amplifier, and 90 days on the vacuum tubes.
See It in Action
Audio Reference sets the E-Glo I against the Audio Research VS-i 75 in a side-by-side listening comparison. The commentary is in Spanish.
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about tube amplifiers, triode operation, or matching speakers to low-power amps? Visit our Learning Center for guides, tips, and expert advice.
- Entirely new topology with pure Class A mode
- Electro Harmonix or E.A.T. KT-88 high power output tubes
- Tube Complement: 1× 12AX7, 2× 12AT7, 4× KT88
- Auto bias functionality with cathode feedback
- Instant switching between triode & ultra-linear mode
- Five line-level inputs with gold plated connectors
- PCB technology with "wire to wire" connection quality
- Advanced relay attenuator technology
- Output transformers with ultra-wide bandwidth
- Premium capacitors in all stages
- High quality casing with real wood side panels
- Brushed-aluminum wireless remote
- Output Power: 2 × 35 W /4 Ohm and 8 Ohm – ultra-linear / 2 × 18W /4 Ohm and 8 Ohm – triode mode
- Input Sensitivity: 500 mV
- Frequency Response: 10 – 50,000 Hz ±0.5dB @ 5W
- Input Impedance: 30 kOhm
- Inputs: 5x line (RCA)
- Harmonic Distortion: < 0.05 % / 1 kHz, 5 W
- Signal-To-Noise Ratio: > 95 dB
- Dimensions (W × H × D): 19.6" × 7" × 19"
- Weight: 57 lb.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.







