AudioQuest Niagara 3000 with Low Z Power Noise Dissipation System - Black
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
Niagara Noise Control, Sized for a Two-Channel Rack
The AudioQuest Niagara 3000 brings Niagara-series thinking to a smaller chassis. It pairs AudioQuest's patented AC Ground-Noise Dissipation System with Level-X linear noise dissipation. Seven outlets are sorted by what plugs in: two for power amplifiers and five for source components.
The two High-Current Low-Z outlets sit behind Transient Power Correction. That circuit holds a current reservoir of over 55 amps peak, for up to 25 milliseconds, even from a 15-amp wall outlet. AudioQuest says it corrects current compression instead of only minimizing it.
Non-sacrificial surge protection takes repeated 6000V and 3000A surges without wearing out. An Extreme Voltage Shutdown watches the line as well. If it reaches 140VAC, the main relay opens in under a quarter of a second, then resets by itself once power is safe.
Why Three Isolated Outlet Groups Matter
The two High-Current outlets are isolated from the five Level-X outlets, and those five split into two more isolated groups. AudioQuest does this so noise from one component does not wash back into the next. Its manual suggests starting with a DAC and streamer in one group, a preamp and turntable in another.
Level-X filtering is differential-mode and linear, tuned for a line impedance that rises with frequency. AudioQuest's manual rates it well in excess of 24dB from 3kHz to 1GHz. The aim is even noise reduction across the band, not one deep notch with ringing on either side.
The outlets are NRG Series, with thick direct-silver plating over beryllium copper. AudioQuest chose them to dissipate induced radio-frequency noise at the point of contact. A rear-panel Power Correction switch should stay on 1, the energized position, for full performance.
The chassis measures 17.5 inches wide, 3.45 inches tall and 15.2 inches deep, and weighs 24.9 pounds. Four rubber feet come fitted. Included 2-RU rack ears take it into a standard 19-inch rack, or it can lie on its side where space is short.
Who Is This Power Conditioner Best For?
- You run one or two power amplifiers. The High-Current outlets give each a reservoir of over 55 amps peak, so your amp is not left waiting on the wall for current
- You own a DAC, streamer, preamp and turntable. Five linear-filtered outlets in isolated groups let you try different pairings until the system is at its quietest
- You have lost gear to a surge before. Protection that does not wear out keeps working after the hit, so you are not swapping in a spent strip
- Your rack is tight on height. At 3.45 inches tall with 2-RU ears included, it mounts in a standard rack or lies on its side where shelf space runs short
- Your system needs more than 15 amps in total — the 3000 is rated for 15 amps RMS, so a larger rig is better served by a higher-capacity power conditioner built for the extra draw
How Does It Connect to Your System?
A power cord is not in the box. You need a 15-amp-rated or higher cord with an IEC C13 end, which plugs into the rear inlet. AudioQuest recommends its NRG-Z, Wind Series or High-Current Storm Series cables.
Plug power amplifiers, monoblocks, integrated amplifiers and powered subwoofers into the two High-Current outlets. Everything else goes into the five linear-filtered outlets. Keep AC cords at least three inches from signal cables, and cross them at 90 degrees when you can't.
Amps in the pair, sources in the five.
Pairs Well With
Building your system? Here are some great companions for the AudioQuest Niagara 3000:
- Power cables for the cord this conditioner needs, sold separately
- Stereo amplifiers to draw on the High-Current outlets
- Monoblock amplifiers for a pair of amps on the two High-Current outlets
- Audio racks sized for a 2-RU conditioner
Frequently Asked Questions
Does a power cord come with the Niagara 3000?
The cord is sold separately. Choose one rated for 15 amps or more with an IEC C13 end. AudioQuest recommends its NRG-Z, Wind Series or High-Current Storm Series cables for the best results.
Which outlets do amplifiers use?
Amplifiers go in the two High-Current outlets, which carry Transient Power Correction. Monoblocks, integrated amplifiers and powered subwoofers can use them too. Source components use the five linear-filtered outlets.
Where do subwoofers plug in?
If you have one or two main amplifiers and one or two subwoofers, the amplifiers take the High-Current pair. AudioQuest's manual says the subwoofers still do well in the source outlets, which can pass transient current well above 50 amps peak.
What does the rear-panel switch do?
It controls part of the Transient Power Correction circuit. Leave it on 1, the energized position, for full performance. AudioQuest provides the 0 setting for rare cases of audible line buzz or concern about smart-meter readings.
Can I rack-mount it?
Yes. The 2-RU rack ears are included, so it fits a standard 19-inch rack. It is 3.45 inches tall and 15.2 inches deep. It can also stand on its side if a shelf is short on height.
What's the warranty?
AudioQuest lists a five-year warranty for the Niagara 3000, for the original purchaser. Registration is encouraged but is not a condition of the warranty.
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we’ve helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it’s right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about power conditioning, current-hungry amplifiers, or protecting your gear from surges? Visit our Learning Center for guides, tips, and expert advice.
- Seven-Outlet power conditioning and protection
- Two High-Current Low-Z Power outlets
- Five Level-X Linear-Filtered Power (source components) outlets
- Patented Ground-Noise Dissipation System
- Transient Power Correction
- Level-X Linear Noise-Dissipation Technology
- Built-in Non-Sacrificial Surge Protection
- Direction-controlled ultra-low-resistance solid wiring and filter inductors
- NRG-Series AC outlets with beryllium copper and Hanging Silver
- Outlets have superior grip and low resistance
- Dimensions: 17.5 inches wide x 3.45 inches high x 15.2 inches deep
- Weight: 24.9 lbs.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




