Furman Elite 15 DMi Power Conditioner
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
Two Meters That Show What Your Power Is Doing
The Furman Elite-15 DMi is a 13-outlet power conditioner with two front-panel meters. The DM stands for Dual Meters. One shows your incoming line voltage and the other shows the current your system is drawing, so you can see your power at a glance.
Nine outlets are linearly filtered, and six of those switch with a 12-volt trigger. Four more outlets add ultrasonic filtering for digital or video gear, and two of them switch. The chassis is 2U, 4 inches tall, 17 inches wide and 14.75 inches deep, and it weighs 14 pounds.
It needs a 15-amp outlet and supplies up to 15 amps RMS across all outlets combined. That suits a small or medium home theater or hi-fi system. The manual says it will run from a 10-amp outlet, but nuisance tripping can follow above 10 amps.
Filtering, Protection and Metering Inside
Furman's Linear Filtering Technology (LiFT) cuts differential-mode noise by more than 40 dB from 10 kHz to 100 kHz and more than 80 dB from 100 kHz to 1 GHz. The curve stays linear from 0.05 to 100 ohms of line impedance, so the filter adds no resonant peaks of its own.
Series Multi-Stage Protection (SMP) is non-sacrificial and has zero ground contamination. It clamps at 188 volts peak with a 6000-volt, 3000-amp input. Extreme Voltage Shutdown cuts power if the incoming line goes above 140 volts. Modular protectors also guard telephone and cable or satellite lines.
The voltage meter watches the incoming line. The current meter reads true RMS current. A rear-panel dimmer switch lowers the blue meter lights for movie night. The control circuits draw 12 watts regardless of load.
Twelve-volt triggering switches six of the linear outlets and two of the ultrasonic ones along with your system. The rest stay on. A bypass button turns everything on if you skip the trigger. Ultrasonic filtering keeps digital and video noise from reaching your analog components.
What Reviewers Are Saying
Audioholics reviewed the Elite-15 DMi in October 2014. It found a sturdy 2U rack-mountable chassis and non-sacrificial series-mode surge protection. The review called it a step above a run-of-the-mill surge strip, with handy features for an AV rack.
Who Is This Power Conditioner Best For?
- You want to watch your power — the meters show voltage and current draw, so you know what your system pulls
- You mix digital and analog gear — four ultrasonic-filtered outlets keep digital and video noise away from analog components
- You want surge protection that lasts — SMP does not wear out on normal surges and sends nothing to ground
- You have a rack — the 2U chassis and rack kit tie a small or medium system together
- Your amplifiers need a current reserve — the DMi is a filter with meters, not an amplifier reserve, so see the models with Power Factor Technology in our power conditioners collection
How Does It Connect to Your System?
Plug the Elite-15 DMi's attached cord into a grounded 15-amp wall outlet, then plug your gear into its outlets. Put digital and video components in the ultrasonic-filtered group. Connect a 12-volt output from a receiver or processor to the trigger jack.
Plug a master component, such as a receiver you switch by remote, into an unswitched outlet. Telephone and cable or satellite lines pass through the protectors on the back. Rack ears are included. Set it up once and leave it.
Pairs Well With
Building your system? Here are some great companions for the Furman Elite-15 DMi:
- Power cables for the components you plug in
- Integrated amplifiers for the unswitched outlets
- Home theater receivers to run the 12-volt trigger
- Audio racks with room for a 2U conditioner
Frequently Asked Questions
What do the dual meters show me?
One meter shows incoming line voltage. The other shows the current your system is drawing. A rear-panel switch dims them.
Will it change the way my system sounds?
A power conditioner adds no sound of its own. It lowers noise on the line and protects your gear. How much you hear depends on how noisy your power is.
What is the difference between switched and unswitched outlets?
Switched outlets turn on and off with a 12-volt trigger, so they follow the rest of your system. Unswitched outlets stay on, which suits gear you leave running or a receiver you control by remote.
How does it differ from Furman's Reference models?
The Elite-15 DMi brings LiFT, SMP and metering to small and medium systems. Reference models add an isolation transformer and an amplifier current reserve. Our power conditioners collection lists them.
What is in the box?
The Elite-15 DMi with its attached power cord, a rack-mount kit and the owner's manual.
What is the warranty?
Furman backs the Elite-15 DMi with a three-year limited warranty against defects in materials and workmanship. Register within 15 days of purchase. Otherwise the term drops to one year.
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we’ve helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it’s right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about power conditioning, line noise, or reading a voltage and current meter? Visit our Learning Center for guides, tips, and expert advice.
- 13-outlet power conditioner
- 15 amp capacity
- 1 linearly filtered front panel outlet
- 4 linearly filtered outlets
- 4 linearly filtered outlets with additional ultrasonic filtering for digital or video components)
- Laboratory grade dual voltage and current meters
- Linear Filtering Technology (LiFT) for unequaled AV clarity
- Series Multi-Stage Protection (SMP) featuring Extreme Voltage Shutdown (EVS)
- Zero ground contamination circuitry protects critical digital components
- Ultrasonic filtering isolates digital and video circuits from analog components
- Detachable surge suppression module for telco and cable / satellite connectors
- 12 volt triggering for remote control
- AC Current Capacity: Input, 15 Amp capacity required; Output, 11-15 Amps RMS (maximum, all outlets combined, continuous)
- Linear Noise Attenuation: Transverse (Differential) Mode, > 4 dB from 1 Khz. - 1 kHz. >8 dB from 2 Khz. - 1 kHz. – 1 GHz. (Linear attenuation curve from .5 – 1 ohms line impedance)
- Power Consumption: 12 Watts for display and control circuits independent of actual load
- Dimensions: 4" high, 17" wide, 14.75" deep (Standard 2 RU height without feet)
- Weight: 14 lbs.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


