NuPrime IA-9X Integrated Amplifier - Black
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
One Switch Changes What This Amplifier Sounds Like
The NuPrime IA-9X has two amplifier voices built in. A switch picks between them. One position runs NuPrime's ODC circuit alone, built for the lowest distortion the company could reach. The other adds a second circuit on top of it.
That circuit adds natural harmonics through Class A transistors, and NuPrime calls the result warmer. It suits vocal and classical music. ODC alone suits dynamic music and studio-style monitoring work. This is a real change in voicing, not a tone control.
A Phono Stage You Can Actually Match
The moving-magnet phono input uses the same MUSES8820 op-amp as the amplifier modules. Sensitivity is 4.0mV at 1kHz, and gain is 65dB at maximum volume, which suits most moving-magnet cartridges.
What sets it apart is the adjustment. Switches on the underside set loading to 32k, 47k or 100k ohms. They also set capacitance to 100, 220 or 320pF. You tune the match to your cartridge instead of living with one fixed setting.
Where 90 Watts Comes From
Power is 90 watts RMS per channel into 8 ohms and 145 watts into 4 ohms. Peaks reach 100 and 160 watts. The source is a pair of ODC Class D amplifier modules.
Distortion is 0.0014% at 5 watts and 0.003% at 50 watts. Signal-to-noise is 95dB at 5 watts and 105dB at 50. Frequency response runs 10Hz to 50kHz within 3dB. Input sensitivity is 1.5V RMS into 47 kilohms, and gain is 24.6dB.
Behind the panel sit 13,200 microfarads of capacitance and 25-amp bridge rectifiers. Volume is digital in 99 steps, and the amplifier remembers your setting when you power it off.
Small Enough to Put Almost Anywhere
The chassis is 9.25 inches wide, 2.4 inches high and 11.1 inches deep, and it weighs 8.4 pounds. Idle draw is 13.5 watts and standby is 4.6 watts at 115V. Trigger in and out on 3.5mm jacks switch other components with it.
What Reviewers Are Saying
Marcin Gałuszka reviewed the IA-9X for HiFi Class and found the bottom end its strength: "The low-frequency range is a significant advantage of this design." He also called the midrange "well-saturated with harmonics."
Who Is This Integrated Amplifier Best For?
- You cannot decide between neutral and warm — the switch gives you both voicings, so you never have to choose once and live with it
- Space is tight — 90 watts a channel from a box 9.25 inches wide, so it fits a desk, a shelf or a small rack
- You own a balanced source — a stereo XLR input sits beside two RCA pairs, so it connects without an adapter
- You play moving-magnet vinyl — switchable loading and capacitance match your cartridge, with no outboard phono stage to buy
- Your music is digital — the IA-9X is analog only, with no digital inputs, streaming or Bluetooth, so add one of our digital-to-analog converters and a computer or streamer plays through it
How Does It Connect to Your System?
Speakers go to the binding posts. A turntable connects to the phono input, then set the loading and capacitance switches underneath to suit your cartridge. A balanced source takes the XLR input, and two more sources fill the RCA pairs.
Check the voltage selector on the underside before you power up, and set it to 115V for US power. The outputs are the speaker terminals and a trigger jack, so plan headphones or a subwoofer around another component. Then pick a voice and play.
Pairs Well With
Building around the IA-9X? Here are some good companions:
- Speakers: 90 watts suits a capable standmount pair — see our Bookshelf Speakers
- Turntable: the adjustable moving-magnet stage is already fitted — see our Turntables
- DAC: the one thing this amplifier does not do — see our Digital-to-Analog Converters
- Interconnects: feed that balanced input properly — see our Interconnect Cables
Frequently Asked Questions
How much power does the IA-9X deliver?
90 watts RMS per channel into 8 ohms and 145 watts into 4 ohms, from Class D ODC modules.
What does the sound-mode switch do?
It picks the amplifier's voice. One position runs ODC alone for the lowest distortion. The other adds a Class A harmonic circuit, which NuPrime describes as warmer.
Can I connect a turntable directly?
Yes, if your cartridge is moving magnet. Moving-coil cartridges need an outboard phono stage or step-up.
Does it have digital inputs or streaming?
The IA-9X is purely analog. Its inputs are phono, two RCA pairs and one XLR pair. A streamer or DAC connects to any of the line inputs.
Is it covered by a warranty?
NuPrime lists a one-year warranty on the IA-9X.
See It in Action
Snake Oil Audio listens to the IA-9X:
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about integrated amplifiers, matching a phono cartridge, or adding a DAC to an analog system? Visit our Learning Center for guides, tips, and expert advice.
- Stereo integrated amplifier for analog gear
- Compact half-width size
- Phono input with adjustable input capacitance and impedance
- RIAA phono amplifier circuit
- Smooth, precise 99-step digital control of analog volume circuit
- Automatic memory when powered off
- Input and output trigger for power on/off control
- Specially customized 13200uf audio-specific capacitors and 25A high-current bridge rectifiers
- Front panel function display
- Wireless remote
- Choose black or silver finish
- 1 x Phono Stage
- 2 x Analog Stereo RCA
- 1 x Analog Stereo XLR
- 1 x Trigger in: DC12V in (3-pin 3.5mm phone jack)
- 2 x Speaker Out
- 1 x Trigger Out: DC12V Out (3-pin 3.5mm phone jack)
- Power Output (RMS): 90W @ 8 Ohms, 145W @ 4 Ohms
- Power Output (peak): 100W @ 8 Ohms, 160W @ 4 Ohms
- Gain: x 17
- Sensitivity (to rated power): 1.5Vrms
- Input Impedance: 47K Ohms
- THD / S/N (typical): @5W (0.0014% ,95dB) , @50W (0.003% , 105dB)
- Frequency Response: 10Hz to 50kHz (-3dB)
- Standby Power: 4.6W @ 115V outlet
- Idle Power: 13.5W @ 115V outlet
- Dimensions: (W x H x D): 9.25" x 2.4" x 11.1 (including feet)
- Weight: 8.4 lb.
- Input resistance (user adjustable): 32K ohm / 47K ohm / 100K ohm
- Input capacitance (user adjustable): 100 pF / 220 pF / 320 pF
- MM Input Sensitivity: 4.0 mV @ 1KHz
- Gain: MM input to line output (Vol./Max.) => 65dB @ 1 kHz
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.





