AudioQuest Evergreen Interconnect Cable - 1.5 Meter - 3.5mm to RCA

Evergreen Is the Step Up from Tower in AudioQuest's 3.5mm-to-RCA Line

A 3.5mm-to-RCA interconnect lets a source built around a small headphone-style jack — a phone, portable player, or compact streamer — feed a stereo system's RCA inputs directly, with no separate adapter in the signal path. What separates a premium cable from a bargain one is conductor quality and shielding against outside noise.

AudioQuest's Evergreen is one step up from Tower in its 3.5mm-to-RCA interconnect line, built around solid Long-Grain Copper conductors, Foamed-Polyethylene insulation and Direction-Controlled Conductors, with a Green/Black Braid jacket.

Solid Long-Grain Copper Conductors

AudioQuest says Long-Grain Copper (LGC) conductors minimize distortion caused by grain boundaries, and that solid conductors avoid the strand-to-strand contact that causes dynamic distortion in stranded cable. Evergreen's Asymmetrical Double-Balanced Geometry is purpose-built for this kind of single-ended, source-to-amp connection.

Direction-Controlled Conductors

AudioQuest's Direction-Controlled Conductors control the directional grain structure of the wire so induced noise drains away from the circuits it would otherwise disturb. Foamed-Polyethylene insulation's high air content minimizes energy absorption for a clearer, more open sound.

The Connectors, Explained

Evergreen ends in a 3.5mm mini plug on the source side and a stereo pair of RCA plugs on the amplifier side, both cold-welded and gold-plated rather than soldered — AudioQuest's high-pressure, solder-free termination method. The jacket is a Green/Black Braid.

Who Is This Interconnect Best For?

• You are upgrading from the cable that came in the box — Evergreen is built around solid Long-Grain Copper, one step up from Tower in AudioQuest's 3.5mm-to-RCA range
• Your source has only a 3.5mm output and your amplifier only takes RCA — this is exactly the mismatch Evergreen is built to bridge, with no separate adapter
• You want direction-controlled, gold-plated terminations with a braided jacket — the same construction runs through the line, and Evergreen adds a Green/Black Braid jacket
• You are connecting a phone, portable player, or compact streamer to a desktop amplifier — this is the short, single-ended run Evergreen's geometry is built for
• Your source also uses RCA outputs — check your source's actual output jack before ordering; this cable only fits a 3.5mm jack on the source end

How Does It Connect to Your System?

Plug the 3.5mm end into your source's headphone or line-out jack, and the two RCA plugs into the matching RCA inputs on your amplifier or receiver, matching red to red and white/black to white/black.

Then power up the system as usual.

Pairs Well With

A 3.5mm-to-RCA interconnect is one link between a source and an amplifier or receiver. It usually joins these categories.

• Music Streamers — many portable and desktop streamers use a 3.5mm output
• Headphone Amplifiers — a common source for a 3.5mm line-level feed
• Digital-to-Analog Converters — some compact DACs use a 3.5mm output instead of RCA
• Stereo Amplifiers — the usual destination for the RCA end of this cable

Frequently Asked Questions

Why does this cable have a 3.5mm plug on one end and RCA plugs on the other?

Many portable players, phones, and compact streaming devices only offer a single 3.5mm headphone-style output, while most home amplifiers and receivers expect a stereo pair of RCA inputs; this cable bridges that one mismatch without an extra adapter.

Does direction matter when I connect this cable?

AudioQuest controls the directional grain structure of its conductors so induced noise drains away from the circuits it would otherwise disturb; where AudioQuest marks a direction on the cable, connect it running from source toward amplifier as marked.

Is Evergreen balanced or unbalanced?

Unbalanced. This is a standard single-ended connection on both ends, not a balanced connection.

Is there a step up?

AudioQuest Golden Gate is the next rung. It moves from Long-Grain Copper to AudioQuest's smoother Perfect-Surface Copper and adds a Red/Black Braid jacket.

Why Audio Advisor?

• 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
• 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
• Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
• Free Shipping — On orders over $49, delivered to your door.
• Flexible Payment Options — Financing available so you can start listening now.

Learn More

Want to learn more about interconnect cables, system setup, or matching your gear? Visit our Learning Center for guides, tips, and expert advice.