Skip to main content
Audiophile Learning Center

Creek Tuner Module for Evo 50A and Evo100A

Click on image to enlarge.

Share
SKU: CKAMBIT
WARNING: for more information go to http://www.P65Warnings.ca.gov
Creek Audio's Ambit is a plug-and-play FM/AM tuner module for Creek's Evolution 50 and 100 amplifiers.
    $250.00
    $250.00
    Have a Question? Ask Our Experts!

    Listen to Your Favorite Stations Like You've Never Heard Them Before

    For more than 30 years Creek Audio has established itself as an expert in the field of radio. Historically, Mike Creek has developed and manufactured radio products since the early 70s. MikeÂ’s father also made radio products, so itÂ’s in his DNA. The latest digital radios use bit-compression to turn all radio stations into the equivalent of very poor quality MP3 players. Needless to say, this is the main reason for Creek not offering a digital radio in its hi-fi range. In any case, you donÂ’t need to buy a digital radio when all the digital and analog stations are broadcast over the internet now. Even analog stations, broadcast over the internet, are digitized and compressed, so the best way to listen is still via a traditional radio or tuner.

    Easy Plug-and-Play Installation

    The latest tuner in Creek’s Evolution 50 range is the Ambit FM/AM Tuner module, suitable for adding to the Evolution 50A or the Evolution 100A amplifier. Plugging this tuner into the back panel of the amplifier upgrades the amp into a receiver. Its plug-and-play nature also allows it to update the amp’s software to the latest revision automatically. Once the tuner is installed and the amp is switched-on, the display will show the amp having an extra input – A Tuner input, in fact. However, it will look like a stand-alone tuner in the OLED display window.

    Once installed, the four left hand buttons on the front panel, together with the left hand control knob and or remote control handset, will offer all the radio function controls.

    Two High Quality ADCs and Digital Signal Processor

    The Ambit tuner receives the entire FM and AM frequency band and digitizes it with two high quality ADCs. It then manages the signal using a digital signal processor and even separates the left and right channel information in FM. After this, using its own high quality DAC, it returns the digital signal to Audio, to be amplified by the Evolution 50A.

    The result is simply brilliant. FM signals have textbook operation, with none of the usual problems associated with analog tuner performance. RDS stations will show their name and other information. AM performance is excellent also and can provide excellent performance just from the loop antenna provided, if there is a good indoor signal.

    FM radio performance is limited only by the quality of the signal and of course the antenna used. Choose an external antenna for the best results.

    Listen to your favorite stations like you have never heard them before.

    Product Features

    • FM/AM tuner module for Evolution 50A or Evolution 100A
    • Plugs into back panel
    • True plug-and-play operation
    • Two high quality ADCs
    • Digital processing
    • RDS functionality
    • Pre-set stations: For FM/AM >100
    • Station programming: Manual or Automatic

    Product Specs

    • FM Frequency Range: 76 – 108 MHz
    • AM Frequency Range: 520 – 1710 kHz MW
    • Tuning Increments: FM: 50, 100 and 200 kHz
    • AM: 9 kHz or 10 kHz
    • FM Sensitivity: -3.5 dBuV 26dB audio & max RF gain
    • Image Rejection: >70dB
    • Adjacent Channel Rejection: >65dB
    • Alternate channel rejection: >70dB
    • Frequency Response (FM only): 30 Hz- 16 kHz -1dB
    • Total Harmonic Distortion: <0.05%
    • Stereo separation (FM only): >40dB
    • Signal to noise (FM only): >70dB (Full limiting) Stereo

    YOU MAY ALSO LIKE

    Customer Reviews

    Back to Top