NuPrime LPS-212 Linear Power Supply

Clean, Low Noise, Linear Power Supply for Audiophiles

Power supplies have a huge impact on the sound quality of your audio gear. Typically, the cleaner the power supply, the better your components will sound. So if you are listening to gear that use outboard power supplies such as wall-warts, you will benefit from this high quality upgrade. The NuPrime LPS-212 is a low noise, clean power, fully balanced El-frame architecture linear power supply designed for audiophiles.

Low power devices such as DAC, streamer, CD player, media server, and digital music player are susceptible to AC noise from switching mode power adapters that usually come with them. However, not any linear power supply will suffice as a replacement for the switching mode power supply. You need a power supply specifically designed for audiophiles.

A Multi-Pronged Approach to Reducing Power Supply Noise

The NuPrime LPS-212 linear power supply incorporates a fully balanced El-frame transformer architecture design that is less susceptibility to core saturation from DC offset, which is a common culprit when it comes to noise in the audio chain.

NuPrime takes a multi-pronged approach to reducing power supply noise. Several features contribute to the effectiveness of the LPS-212 as a hi-fi power supply with clean and stable output power designed for audiophiles.

The LPS-212 uses a low noise MOSFET design with an EMI filter to combat electromagnetic noise that can piggyback on your audio signal with a lesser power supply. The soft start and fanless design contribute to the low overall noise. The full transformer epoxy resin package avoids vibration interference. The low dropout linear output offers additional noise-fighting circuitry. The large capacitance output is higher than 35,000 uF.

Additionally, the LPS-212 provides overvoltage protection, overcurrent protection, over-temperature protection, and lightning protection to help safeguard connected gear and provide the cleanest on-spec power for best sound.

An LED status display indicates for Standby, In-Use, and Protection status. Two outputs are included: 1 x DC 12V/2A and 1 x DC 12V/1A.Both outputs use 5.5 X 2.1 female connectors. Total power output is 36 watts.

Product Features

Overview

Low-noise linear power supply for audiophiles
Low noise MOSFET
EMI filter
Soft start and fanless design
Full transformer epoxy resin package to avoid vibration interference
Low dropout linear output
Overvoltage protection
Overcurrent protection
Over-temperature protection
Lightning protection
Large capacitance output higher than 35,000 uF
LED status display for Standby, In-Use, and Protection state
Input: 230VAC or 115VAC 50/60Hz (with voltage selector)
Output: DC 12V/2A and DC 12V/1A outputs
Output connectors: Two 5.5 X 2.1 female sockets
Total power: 36W

Accessories

DC to DC cable X 2
Power cable X 1

Product Features

OverviewLow-noise linear power supply for audiophilesLow noise MOSFETEMI filterSoft start and fanless designFull transformer epoxy resin package to avoid vibration interferenceLow dropout linear outputOvervoltage protectionOvercurrent protectionOver-temperature protectionLightning protectionLarge capacitance output higher than 35,000 uFLED status display for Standby, In-Use, and Protection stateInput: 230VAC or 115VAC 50/60Hz (with voltage selector)Output: DC 12V/2A and DC 12V/1A outputsOutput connectors: Two 5.5 X 2.1 female socketsTotal power: 36WAccessoriesDC to DC cable X 2Power cable X 1

Product Specs

Input: 230VAC or 115VAC 50/60Hz (with voltage selector)
Output: DC 12V/2A and DC 12V/1A outputs
Output connectors: Two 5.5 X 2.1 female sockets
Total power: 36W
Dimension: 6.1" (W) X 4.5" (L) X 2.3" (H)
Weight: 2.9 lbs.

Product Specs

Input: 23VAC or 115VAC 5/6Hz (with voltage selector)Output: DC 12V/2A and DC 12V/1A outputsOutput connectors: Two 5.5 X 2.1 female socketsTotal power: 36WDimension: 6.1" (W) X 4.5" (L) X 2.3" (H)Weight: 2.9 lbs.