Enhance the Performance of Your VPI Classic
Right out of the box, the VPI Classic turntable is a superb vinyl playback machine. To eke out an even higher level of audiophile performance, add the Gingko Audio Cloud 11 isolation platform that's made just for the Classic.
The Gingko Cloud 11 isolation platform is based on the critically acclaimed Cloud Ten, but adds important upgrades.
Its bottom plate is designed with deeper wells to provide an additional level of component stability, while the top plate features a thicker skirt that makes the platform more rigid. The standard size of the top plate is 19 x 16 to accommodate components with larger footprints, while the extra thickness of the bottom plate and the top plate skirt improve vibration reduction performance to an average of 99% of the vibration from 5 Hz to 500 Hz, with a resonance frequency of around 13 Hz.
A Tunable Vibration Control System
Cloud 11 is a tunable vibration control system offering complete flexibility in getting the most out of your audio system. Cloud Ten consists of an acrylic isolation platform and rubber support balls. Its elegant design belies its functional effectiveness. Cloud 11 works well because of the correct choice of material coupled with a flexible design that lets you experiment with different balls in different positions for the best overall performance.
How Cloud 11 Works
Acrylic does an excellent job in dissipating any vibrating energy it receives because of its complex, dense, and irregular molecular structure. In addition to the acrylic platform, Cloud 11 also uses rubber balls to further isolate the equipment from vibration. The rubber balls serve two critical functions. They provide four degrees of freedom in the movement of the top platform relative to the bottom base. The top platform sitting on the rubber balls can freely move up and down, front to back, side to side, and rotationally without causing undulating, repeating motion that continues long after the original vibration.
The rubber balls are also used to balance the uneven load of some equipment such as amplifiers or turntables. By placing the rubber balls in the different positions in the base, you can level the equipment to even the load.