Music Hall MMF 7.3 Turntable with Ortofon 2M Bronze

Superb Dual-Plinth Turntable with Acrylic Platter

The Music Hall MMF-7.3 turntable is a two-speed belt driven audiophile turntable employing the unique dual-plinth construction originated by Music Hall.

The distinctive design of the MMF-7.3 isolates the critical sound reproducing components. The platter, main bearing, tonearm, and cartridge on the top platform are isolated from the adjustable tip-toe feet, which are mounted on the bottom platform. The motor speed controls, and wiring are isolated on their own platform and completely decoupled from the turntable.

The MMF-7.3 features Music Hall’s unique dual plinth construction, using Sorbothane hemispheres to separate the two platforms and provide additional suspension and vibration damping. The low noise, fully manual belt drive design will bring out the best in your vinyl.

Carbon Fiber Tonearm

The one-piece full carbon fiber tonearm is light, rigid, and non-resonant. The counterweight’s center of gravity is level with the stylus tip and is also decoupled from the arm to act as a resonance damper.

The MMF-7.3's completely isolated/decoupled DC motor boasts convenient 33-1/3 and 45 rpm electronic speed change controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridge. The motor sits on its own resonance damping puck.

Acrylic Platter

You usually have to pay a lot more to get a non-resonant acrylic platter with your turntable, but it comes standard with the MMF-7.3. The precision stainless steel main bearing is sheathed in Teflon® for noise-free, fluid operation.

More, More, More!

Other features include high quality gold RCA connectors, adjustable tip toe feet with anti scratch cups, a built-in round spirit level for proper leveling, a dust cover, 45rpm adaptor, metal screw-on record clamp, soft felt mat, and detachable phono cable. Also included is an excellent instruction manual and easy assembly.

Cartridge Option

The MMF-7.3 comes in a high-gloss piano black lacquer finish and is available with or without the Ortofon 2M Bronze cartridge.

The optional Ortofon 2M Bronze Optional Ortofon 2M Bronze cartridge with a nude fine line stylus is a $440 value. It comes properly aligned and mounted so that set-up is a cinch!

Made in the Czech Republic.

• Music Hall’s unique dual plinth construction
• One-piece full carbon fiber tonearm
• Counterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper
• Completely isolated/decoupled DC motor with 33-1/3 and 45 rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridge
• Motor sits on its own resonance damping puck
• Optional Ortofon 2M Bronze cartridge with a nude fine line stylus ($440 value) properly aligned and mounted
• Precision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operation
• Non-resonant acrylic platter
• High quality gold RCA connectors
• Adjustable tip toe feet with anti scratch cups
• Low noise fully manual belt drive design
• Built-in round spirit level for proper leveling
• Excellent instruction manual and easy assembly
• Package includes: dust cover, 45rpm adaptor, metal screw-on record clamp, soft felt mat, and detachable phono cable

• Power supply: 15V / 0-0.8mA DC
• Universal power supply power connection: 110/120 or 230/240 Volt, 50 or 60 Hz
• Standby power consumption: < 1 W
• Speeds: 33-1/3 rpm & 45 rpm, electronic speed change
• Wow and flutter: ± 0.10 %
• Speed deviation: ± 0.06%
• Rumble max: > – 73 db
• Effective tonearm length: 9 in. (230 mm)
• Tonearm weight: 250 g (without counterweight)
• Effective tonearm mass: 8.5 g
• Overhang: 18 mm
• Dimensions: 18.25" wide x 5.5" high x 13.25" deep
• Weight: 24 lbs. pkg.