Analysis Plus Silver APEX Interconnect Cable - 0.5 Meter - RCA to RCA - Pair

Analysis Plus Silver APEX Interconnect Cable - 0.5 Meter - RCA to RCA - Pair

What It Does in Your System

The Top of the Analysis Plus Range

Silver Apex is the most advanced cable Analysis Plus builds — the full expression of the hollow oval conductor work the Michigan company has refined over decades. Where their other cables lay hollow ovals side by side or stack them, Silver Apex nests three of them one inside another, a construction complex enough that the manufacturing itself is a challenge.

This listing is a matched pair of 0.5-meter cables with RCA terminations — one per channel, in the short length that suits components stacked or sitting side by side on the same shelf.

Silver Over Copper — Detail Without the Glare

Silver conductors have an old reputation for a thin, bright, slightly hard top end, earned by earlier implementations. Analysis Plus lays pure silver over a stabilizing strand of oxygen-free copper, which serves two purposes at once: the copper supplies the structural strength the hollow oval geometry demands, and the pairing delivers silver's speed and resolution without the hard edge.

The result is a cable that doesn't editorialize. Reviewers have consistently described it as neither warm nor clinical — it follows the recording without adding commentary of its own, with treble that stays expressive and colorful rather than glassy.

Why the Hollow Oval Works

After extensive computer simulation, Analysis Plus concluded that a hollow oval is the best possible conductor shape. The oval profile lets more of the return current sit close to the outgoing current, which reduces the current bunching that plagues cylindrical conductors. And because the center of a conductor goes unused at high frequencies anyway, they simply removed it — which minimizes how much resistance changes with frequency and makes the cable more efficient.

The three nested ovals also create a genuine double-shielded design, dropping the noise floor far enough that low-level detail and room ambience stop hiding underneath it.

Is This Right for You?

A few things to confirm before you order:

• Half a meter is short — measure first. It's ideal for components stacked or side by side on one shelf. If your amplifier sits on a lower level or you need to dress the cables behind a rack, step up a length rather than leaving them under tension at the connectors.
• This is a complete pair. Two cables, one per channel — everything a stereo connection needs. No need to double your quantity.
• Line level, not phono. This connects sources to a preamp, receiver, or integrated amplifier — streamers, DACs, disc players. It isn't a phono cable, which needs specific low-capacitance construction for a turntable's cartridge output.

Setup & Installation

Connect each cable from your source component's outputs to the corresponding inputs on your preamp, receiver, or integrated amplifier, pushing each plug fully onto its jack and keeping left and right consistent at both ends. The RCA connectors are a custom Analysis Plus design that grips the jack firmly — expect them to seat with more authority than a generic plug.

At this length there's little slack to spare, so confirm the run works without tension before ordering. A cable pulled taut against an RCA jack puts steady stress on both the connector and the socket, and neither was designed to carry it.

Features & Specifications

Triple-Nested Hollow Oval Geometry
Three hollow oval conductors nested one inside another — the most advanced expression of the patented Analysis Plus design.

Pure Silver Over Oxygen-Free Copper
Silver delivers speed and resolution while the copper core provides the structural stability the hollow oval requires.

Double-Shielded Design
The nested construction drops the noise floor far enough to reveal detail that was previously masked.

Custom Analysis Plus RCA Terminations
Purpose-designed connectors maintain a firm grip on the jack for a secure, reliable contact.

Specifications

• Length: 0.5 meters (approx. 1 ft 8 in)
• Termination: RCA to RCA
• Quantity: Matched pair (two cables)
• Conductor: Pure silver over a stabilizing strand of oxygen-free copper
• Geometry: Patented hollow oval, triple-nested
• Shielding: Double shielded
• Series Position: Top of the Analysis Plus range
• Made in: Flushing, Michigan, USA

Frequently Asked Questions

Do I need to order two?
No. This listing is a matched pair — two 0.5-meter cables, one for each channel — so a single order completes a stereo connection between your components.

Will a silver cable sound bright?
Not this one. The silver is applied over a copper core rather than used alone, and reviewers have consistently found Silver Apex refined and relaxed rather than forward — detailed at the top without calling attention to itself.

Should I choose RCA or XLR?
If both components have true balanced circuitry, the XLR version is the more robust connection. If either end is single-ended — which covers a great many excellent components — RCA is the right choice, and this cable is where Analysis Plus puts its best work regardless of termination.

Why Audio Advisor?

• 40+ Years of Expertise – Helping music lovers build better systems since 1981.
• 60-Day Money-Back Guarantee – Hear it in your own system with confidence.
• Real Product Experts – Friendly advice before and after your purchase.
• Free Shipping – On qualifying orders over $49.
• Flexible Financing – Convenient payment options available.