AudioQuest Angel Interconnect Cable - 2.0 Meter - 3.5mm Female to 3.5mm

Angel Adds Silver Conductors and a 72-Volt Bias System

A 3.5mm mini interconnect carries an analog signal between two components using the same small plug most headphones use, so no adapter is needed on gear already built around that jack. What separates a premium cable from the one in the box is conductor quality and shielding against outside noise.

AudioQuest's Angel is built around Perfect-Surface Silver conductors, FEP Air-Tube insulation, three-layer Carbon-Based Noise-Dissipation, and a 72-volt Dielectric-Bias System with an RF Trap borrowed from AudioQuest's Niagara power products. It is also available as a Male-to-Female extension, built to the same construction.

Solid Perfect-Surface Silver Conductors

AudioQuest calls Perfect-Surface Silver its highest-quality metal, saying it minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation. Angel terminates in cold-welded, direct-silver-plated pure red copper connections, wrapped in FEP Air-Tube insulation.

Three alternating layers of metal and carbon-loaded synthetics “shield the shield,” AudioQuest says, absorbing and reflecting most RF energy before it reaches the layer attached to ground, the same three-layer approach carried through Sydney and Yosemite.

72-Volt Dielectric-Bias System With an RF Trap

AudioQuest's 72-volt Dielectric-Bias System saturates and polarizes the insulation, the company says, allowing clear, dynamic sound against a quiet background. An RF Trap, developed for AudioQuest's Niagara power products, ensures radio-frequency noise is not induced into the signal conductors from the DBS field elements itself. The system is covered by US Patents 7,126,055 and 7,872,195 B1.

The Connectors, Explained

The standard Angel cable ends in a 3.5mm mini plug on each end. AudioQuest also builds a Male-to-Female version, with a female 3.5mm jack on one end, using the identical conductors, insulation and noise-dissipation construction described above, for extending a 3.5mm cable you already own.

Who Is This Interconnect Best For?

• You want AudioQuest's most elaborate mini interconnect construction below Yosemite — Angel is the only tier in this range with both silver conductors and a 72-volt Dielectric-Bias System
• Your source and amplifier both use a standard 3.5mm jack — the Male-to-Male version is a plain 3.5mm-to-3.5mm cable that fits any such pair of jacks
• Your existing 3.5mm cable doesn't quite reach your gear — the Male-to-Female version extends it, built to the identical construction as the standard cable
• You are feeding a reference-level portable or desktop source — Angel sits near the top of AudioQuest's mini interconnect range for exactly that role
• Your budget stops at Sydney's price and that tier already covers your gear — AudioQuest Sydney is the lower-priced cable one rung down

How Does It Connect to Your System?

For the standard cable, plug one 3.5mm end into your source's headphone or line-out jack, and the other into the matching 3.5mm input on your amplifier or receiver. For the Male-to-Female version, plug your existing 3.5mm cable's male end into the female jack, and the new cable's male end into your amplifier or receiver.

Then power up the system as usual. Other and longer lengths available. Call for prices.

Pairs Well With

A 3.5mm interconnect is one link between a source and an amplifier or receiver. It usually joins these categories.

• Music Streamers — many portable and desktop streamers use a 3.5mm output
• Headphone Amplifiers — a common source for a 3.5mm line-level feed
• Digital-to-Analog Converters — some compact DACs use a 3.5mm output instead of RCA
• Stereo Amplifiers — the usual destination for the far end of this cable

Frequently Asked Questions

What's the difference between the Male-to-Male and Male-to-Female versions?

AudioQuest builds both from the same conductors, insulation and noise-dissipation system described above; the only difference is the connector at one end. Male-to-Male runs from a source straight to an amplifier or receiver. Male-to-Female extends a 3.5mm cable you already own, adding reach without replacing it.

Does direction matter when I connect this cable?

AudioQuest controls the directional grain structure of its conductors so induced noise drains away from the circuits it would otherwise disturb; where AudioQuest marks a direction on the cable, connect it running from source toward amplifier as marked.

What is the 72-volt Dielectric-Bias System?

AudioQuest says it saturates and polarizes the cable's insulation, allowing clear, dynamic sound against a quiet background, with an RF Trap borrowed from its Niagara power products to keep the bias system itself from inducing noise into the signal.

Is Angel balanced or unbalanced?

Unbalanced. Both the standard and Male-to-Female versions are single-ended 3.5mm connections, not balanced.

Is there a step up?

Not in the AudioQuest mini interconnect range below Yosemite we carry. Angel is the top of that range. If you want to go further, call us and we will talk through the whole chain.

Why Audio Advisor?

• 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
• 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
• Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
• Free Shipping — On orders over $49, delivered to your door.
• Flexible Payment Options — Financing available so you can start listening now.

Learn More

Want to learn more about interconnect cables, system setup, or matching your gear? Visit our Learning Center for guides, tips, and expert advice.