AudioQuest Angel Interconnect Cable - 5.0 Meter - 3.5mm to RCA

Angel Adds Silver Conductors and a 72-Volt Bias System

A 3.5mm-to-RCA interconnect lets a source built around a small headphone-style jack — a phone, portable player, or compact streamer — feed a stereo system's RCA inputs directly, with no separate adapter in the signal path. What separates a premium cable from a bargain one is conductor quality and shielding against outside noise.

AudioQuest's Angel is built around Perfect-Surface Silver conductors, FEP Air-Tube insulation, three-layer Carbon-Based Noise-Dissipation, and a 72-volt Dielectric-Bias System with an RF Trap borrowed from AudioQuest's Niagara power products, the most elaborate 3.5mm-to-RCA construction below Yosemite.

Solid Perfect-Surface Silver Conductors

AudioQuest calls Perfect-Surface Silver its highest-quality metal, saying it minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation. Angel terminates in cold-welded, direct-silver-plated pure red copper connections, with no underlying nickel layer.

Three alternating layers of metal and carbon-loaded synthetics 'shield the shield,' AudioQuest says, absorbing and reflecting most RF energy before it reaches the layer attached to ground, wrapped in FEP Air-Tube insulation that keeps almost no contact between metal and dielectric.

72-Volt Dielectric-Bias System With an RF Trap

AudioQuest's 72-volt Dielectric-Bias System saturates and polarizes the insulation, the company says, allowing clear, dynamic sound against a quiet 'black' background. An RF Trap, developed for AudioQuest's Niagara power products, keeps the DBS field elements themselves from inducing radio-frequency noise into the signal conductors.

The Connectors, Explained

Angel ends in a 3.5mm mini plug on the source side and a stereo pair of RCA plugs on the amplifier side, cold-welded and direct-silver-plated with no underlying nickel layer.

Who Is This Interconnect Best For?

• You want AudioQuest's most elaborate 3.5mm-to-RCA construction below Yosemite — Angel is the only tier in this range with both silver conductors and a 72-volt Dielectric-Bias System
• Your source has only a 3.5mm output and your amplifier only takes RCA — Angel bridges that mismatch with no separate adapter
• You are feeding a reference-level portable or desktop source — Angel sits near the top of AudioQuest's 3.5mm-to-RCA range for exactly that role
• You want a bias-system cable but don't need Angel's flagship RCA-to-RCA sibling — this 3.5mm-to-RCA Angel carries the same 72-volt DBS and RF Trap in a source-friendly connector pairing
• Your budget stops at Sydney's price and that tier already covers your gear — AudioQuest Sydney is the lower-priced cable one rung down

How Does It Connect to Your System?

Plug the 3.5mm end into your source's headphone or line-out jack, and the two RCA plugs into the matching RCA inputs on your amplifier or receiver, matching red to red and white/black to white/black.

Then power up the system as usual. Other and longer lengths available. Call for prices.

Pairs Well With

A 3.5mm-to-RCA interconnect is one link between a source and an amplifier or receiver. It usually joins these categories.

• Music Streamers — many portable and desktop streamers use a 3.5mm output
• Headphone Amplifiers — a common source for a 3.5mm line-level feed
• Digital-to-Analog Converters — some compact DACs use a 3.5mm output instead of RCA
• Stereo Amplifiers — the usual destination for the RCA end of this cable

Frequently Asked Questions

Why does this cable have a 3.5mm plug on one end and RCA plugs on the other?

Many portable players, phones, and compact streaming devices only offer a single 3.5mm headphone-style output, while most home amplifiers and receivers expect a stereo pair of RCA inputs; this cable bridges that one mismatch without an extra adapter.

Does direction matter when I connect this cable?

AudioQuest controls the directional grain structure of its conductors so induced noise drains away from the circuits it would otherwise disturb; where AudioQuest marks a direction on the cable, connect it running from source toward amplifier as marked.

What is the 72-volt Dielectric-Bias System?

AudioQuest says it saturates and polarizes the cable's insulation, allowing clear, dynamic sound against a quiet background, with an RF Trap borrowed from its Niagara power products to keep the bias system itself from inducing noise into the signal.

Is Angel balanced or unbalanced?

Unbalanced. This is a single-ended connection on both ends, not a balanced connection.

Is there a step up?

Not in the AudioQuest 3.5mm-to-RCA range below Yosemite we carry. Angel is the top of that range. If you want to go further, call us and we will talk through the whole chain.

Why Audio Advisor?

• 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
• 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
• Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
• Free Shipping — On orders over $49, delivered to your door.
• Flexible Payment Options — Financing available so you can start listening now.

Learn More

Want to learn more about interconnect cables, system setup, or matching your gear? Visit our Learning Center for guides, tips, and expert advice.