AudioQuest Boxer Subwoofer Cable - 5.0 Meter - RCA
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
AudioQuest Boxer Subwoofer Cable - 5.0 Meter - RCA
What It Does in Your System
Sixteen Feet of Reach, With a Ground Wire Built In
A subwoofer almost never sits next to the receiver. It ends up in a corner or behind the seating, and the cable has to get there. This single 5-meter cable carries the low-frequency signal from your AV receiver, processor, soundbar, or preamp to a powered subwoofer. Five meters is about sixteen and a half feet.
Boxer sits high in AudioQuest's subwoofer line. It carries 1.25% silver on its conductors, more than the models below it. It also has a built-in ground wire, which is the fix for the hum problem that catches out so many subwoofer owners.
Air-Tube Insulation, Because Air Absorbs Almost Nothing
Any solid material touching a wire steals a little energy from the signal and gives it back late. You hear that as blur. Boxer uses Polyethylene Air-Tube insulation, which suspends the wire so most of what surrounds it is air.
Air absorbs almost no energy, so there's very little to give back. You'll hear that as bass with speed and definition — notes with a clear start and stop, rather than a general rumble behind the music.
Three Layers of Carbon Shielding for Long Runs
A sixteen-foot cable running near power cords picks up radio noise. Full shield coverage is easy to achieve, but it isn't enough on its own. The problem is that a normal shield drains that noise straight into your equipment's ground connection, where it causes distortion.
Boxer's Carbon-Based 3-Layer Noise-Dissipation System uses metal and carbon-loaded materials to stop most of that noise before it gets there. Backgrounds get quieter, and detail that was buried in the hash comes forward.
Is This Right for You?
A quick check before you order:
- Measure your route, not the room. Five meters is over sixteen feet, which suits a subwoofer across a large room. Walk the actual path around furniture and along baseboards before you decide.
- You've had hum trouble, or you want to avoid it. Boxer includes ground leads for exactly that. That's a real advantage over subwoofer cables without them.
- This is one cable, not a pair. It connects one subwoofer output to one subwoofer input. If you run two subs, you need two cables.
Setup & Installation
Connect one end to the LFE or Subwoofer Out jack on your receiver, processor, or preamp. Connect the other to the LFE In or Line In on your subwoofer. If your sub has left and right line inputs but no LFE jack, use the input your subwoofer's manual specifies. Push the plugs straight on rather than twisting them.
Most systems won't need the ground wire. If you do get hum, attach the small spade tails to a ground screw on the back of each component, or to any chassis screw on both the sending unit and the subwoofer. Keep the run clear of AC power cords where you can, and cross them at right angles where you can't.
Features & Specifications
Solid 1.25% Silver Conductors
Silver sits on the wire surface, where high-frequency signals travel, which cuts distortion and sharpens the low end.
Polyethylene Air-Tube Insulation
Surrounding the wire with air instead of solid plastic means almost no energy is stolen and given back as blur.
Carbon-Based 3-Layer Noise-Dissipation System
Metal and carbon-loaded materials stop most radio noise before it reaches your equipment's ground connection.
Built-In Ground Leads
Small spade tails let you ground the cable if your system hums, without buying anything extra.
Specifications
- Type: RCA subwoofer interconnect, single cable, with ground leads
- Length: 5.0 meters (16 ft 5 in)
- Conductors: Solid Long-Grain Copper with 1.25% silver plating
- Insulation: Polyethylene Air-Tube
- Geometry: Asymmetrical Double-Balanced
- Noise dissipation: Carbon-Based 3-Layer Noise-Dissipation System
- Terminations: Cold-welded RCA plugs, Hanging-Silver over pure Red Copper
- Included: One subwoofer cable with ground leads
Frequently Asked Questions
What are the small wires with spade ends for?
Those are ground leads. Most systems don't need them. If your subwoofer hums, attach them to a ground screw or any chassis screw on both your receiver and your subwoofer. That usually clears it up.
Will 16 feet be too long for my subwoofer?
No. This signal handles long runs well, and the shielding here is what keeps a long cable quiet. Order the length that fits your real path. Extra cable coiled behind the rack does nothing for you.
How does Boxer compare to Irish Red?
Boxer carries more silver — 1.25% against Irish Red's 0.5% — and steps up to Air-Tube insulation and a three-layer carbon shield. Irish Red is a strong cable. Boxer is the step up when you want more from the low end.
Why Audio Advisor?
- 40+ Years of Expertise – Helping music lovers build better systems since 1981.
- 60-Day Money-Back Guarantee – Hear it in your own system with confidence.
- Real Product Experts – Friendly advice before and after your purchase.
- Free Shipping – On qualifying orders over $49.
- Flexible Financing – Convenient payment options available.
- Solid 1.25% Silver Conductors
- Double-Balanced Geometry
- Polyethylene Air-Tube Insulation
- Carbon-Based 3-Layer Noise-Dissipation System (NDS)
- Cold-Welded, Hanging-Silver Directly Over 20.0m Pure Red Copper RCA Plugs
- 5.0 meter length
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

