AudioQuest Carbon Toslink Fiber Optic Digital Cable + Mini Adaptor PVC- 8.0 Meter

AudioQuest Carbon Toslink Fiber Optic Digital Cable + Mini Adaptor PVC - 8.0 Meter

What It Does in Your System

A Long Optical Run From TV to Sound System, Adaptor Included

This is the cable that carries digital audio out of a TV, streaming box, game console, or CD player and into a soundbar, DAC, receiver, or powered subwoofer. Standard Toslink connectors at both ends, in a generous 8-meter (26 ft 3 in) length for when the display and the electronics live on opposite sides of the room.

A 3.5mm mini-Toslink adaptor is included in the box, so components with the smaller combination headphone-and-optical jack — common on laptops and some compact players — are covered without a separate purchase.

Nineteen Fibers Instead of One, and the Difference Is Timing

Most Toslink cables use a single large fiber. Light from the LED enters at many different angles, so some of it takes a longer, bouncing path down the cable and arrives late — like a pool ball ricocheting off the rails. That dispersion smears the data across time and narrows bandwidth, and the decoder on the other end has to work with a blurred signal.

Carbon uses 19 narrow-aperture fibers of high-purity synthetic instead. The light path is more direct, dispersion drops sharply, and what reaches your DAC is better-timed data. You'll hear that as less jitter-related hardness and more realistic detail.

Precision-Polished Ends and Complete Electrical Isolation

The fiber ends are precision-polished, which matters because a rough or imprecise end scatters light right at the moment of transfer — exactly where timing errors get introduced.

Optical also brings an advantage no copper cable can match: the connection is entirely non-metallic, so there's no electrical path between your components at all. That galvanic isolation blocks ground loops and stops induced radio-frequency noise from traveling between devices, which is worth a great deal when a TV and an audio system are on different circuits.

Is This Right for You?

A quick check before ordering:

• Confirm both components have optical jacks. Look for a small square port, often labeled Optical, Toslink, or Digital Audio Out, sometimes with a hinged dust flap. If one end of your setup only has a 3.5mm combination jack, the included mini adaptor handles it.
• You've got a real distance to cover, or a ground loop to break. Eight meters is over 26 feet — right for a wall-mounted TV feeding equipment across the room. Optical's electrical isolation also solves hum problems that copper connections can't.
• Optical has bandwidth limits worth knowing. Toslink carries two-channel PCM and compressed surround formats like Dolby Digital and DTS. It cannot carry Dolby Atmos, DTS:X, or high-resolution multichannel audio — those need HDMI. If lossless surround is the goal, talk to us about an HDMI eARC connection instead.

Setup & Installation

Pull the protective caps off both ends and save them. Push each connector straight into the optical port until it seats — some ports have a spring-loaded dust flap that the plug pushes open. If you need the mini-Toslink end, fit the included 3.5mm adaptor over the connector before inserting. Then set your source device's digital audio output to PCM or Bitstream as your receiver or soundbar requires.

Optical fiber doesn't like sharp bends, so route the 8-meter run with generous curves rather than tight corners, and avoid pinching it under furniture legs or in a door frame. The good news on a run this long: because there's no metal in the signal path, you can run it alongside AC power cords without any concern about interference.

Features & Specifications

19 Narrow-Aperture Synthetic Fibers
A multi-fiber bundle replaces the single large fiber found in ordinary Toslink cables, sharply reducing light dispersion and the timing errors it causes.

Precision-Polished Fiber Ends
Smooth, accurately finished terminations reduce scattering at the transfer point, where jitter is most easily introduced.

Full Galvanic Isolation
A non-metallic connection means no electrical path between components — no ground loops, and no RF noise carried from one device to another.

3.5mm Mini-Toslink Adaptor Included
Connects to laptops and compact components that use the smaller combination optical jack, with nothing else to buy.

Specifications

• Type: Toslink optical digital audio cable, single
• Length: 8.0 meters (26 ft 3 in)
• Fiber: 19 narrow-aperture, high-purity synthetic fibers
• Fiber ends: Precision-polished
• Connectors: Toslink to Toslink
• Isolation: Non-metallic connection provides full galvanic isolation
• Jacket: PVC
• Included: One optical cable; 3.5mm mini-Toslink adaptor

Frequently Asked Questions

Does the mini adaptor come with the cable?
Yes — a 3.5mm mini-Toslink adaptor is included. It fits over the standard Toslink connector so you can plug into the smaller combination optical jacks found on many laptops and compact components.

Will this pass Dolby Atmos or DTS:X?
No. The Toslink standard doesn't have the bandwidth for object-based or lossless multichannel formats. Optical handles two-channel PCM and compressed surround like Dolby Digital and DTS very well. For Atmos or DTS:X you'll need HDMI with eARC.

Is 8 meters too long for an optical cable?
No. Toslink handles long runs well, and because the connection is entirely non-metallic there's no accumulated electrical noise to worry about over distance. Just measure your actual routing path and avoid sharp bends when you install it.

Why Audio Advisor?

• 40+ Years of Expertise – Helping music lovers build better systems since 1981.
• 60-Day Money-Back Guarantee – Hear it in your own system with confidence.
• Real Product Experts – Friendly advice before and after your purchase.
• Free Shipping – On qualifying orders over $49.
• Flexible Financing – Convenient payment options available.