AudioQuest Rocket 11 Speaker Cable - Bulk by the Foot - White

AudioQuest Rocket 11 Bulk Cable, Cut to the Length You Need

This is AudioQuest's Rocket 11 speaker cable in bulk, sold by the foot. Rocket 11 won a What Hi-Fi? Award every year from 2018 through 2022, and buying it in bulk lets you cut each run to exactly the length your room needs.

AudioQuest rates this bulk cable CL3/FT4 for in-wall use, in a black or white PVC jacket. It uses 14 AWG Long-Grain Copper in a Semi-Solid Concentric design. Bulk cable suits in-wall jobs and odd-length runs, and it lets you fit the connectors you prefer.

The Hidden Problem With Ordinary Stranded Wire

In an ordinary stranded cable, each strand shifts position inside the bundle, and AudioQuest says that strand interaction adds distortion. In its Semi-Solid Concentric cable, the strands keep their fixed places, which it says significantly reduces distortion.

The Twist That Lowers Inductance

AudioQuest says Long-Grain Copper has fewer oxides, fewer impurities and fewer grain boundaries than ordinary copper. The two conductors in each half of the cable are twisted around one another, which AudioQuest says lowers inductance. PVC insulation minimizes energy absorption for clearer sound. Every conductor is controlled for direction, AudioQuest says, to reduce radio-frequency noise.

What Reviewers Are Saying

In a five-star review dated October 12, 2022, What Hi-Fi? wrote that "the best thing this AudioQuest cable does is get out of the way and simply let you enjoy the music."

Who Is This Bulk Speaker Cable Best For?

• You are wiring speakers inside walls or ceilings — the CL3/FT4 rating means this is a cable approved for in-wall runs
• Your runs are an odd length — buying by the foot means no coiled slack behind the rack
• You want an award-winning cable in the wall — Rocket 11 won a What Hi-Fi? Award five years running
• You want a white cable — a white jacket option blends into light walls and trim
• You want a cable that is ready to plug in — bulk cable arrives without connectors. Add spades or bananas from our Speaker Cable Connectors collection

How Does It Connect to Your System?

Cut the cable to length, strip a short section at each end, and fit your connectors. Connect one end to your amplifier's speaker outputs and the other to your speaker's binding posts, red to red and black to black. Do the same for the second speaker.

The Measuring Mistake That Leaves You Inches Short

Speaker cable is cut for one room. Measure the path the cable will really take, around furniture and along the baseboard. Then add a little slack. As Cardas puts it, "A cable that's just long enough usually turns out to be just not long enough." Keep the left and right runs the same length, as Cardas recommends, even when one speaker sits closer.

Finish Each End With a Connector

Bulk cable arrives as bare wire. Bare copper oxidizes quickly, and Cardas notes that copper oxide is not a good conductor. So we suggest finishing each end with a spade or banana rather than leaving it bare. You will find both in our Speaker Cable Connectors collection.

Strip the ends, fit your connectors, and tighten everything down before you power up.

When Is It Time to Upgrade?

Speaker cable often stays put for years, so it tends to be the last thing upgraded. Look again when something else changes. Moving from bookshelf speakers to floorstanders is the big one. In our experience, about nine in ten people who make that move keep their old speaker cable. A stronger amplifier, a longer run, or darkened ends are the other signs.

Pairs Well With

Bulk speaker cable needs connectors at each end, and joins your amplifier to your speakers.

• Speaker Cable Connectors — spades and bananas to finish each end of the cable
• Floorstanding Speakers — the best time to rethink your speaker cable
• Integrated Amplifiers — the amplifier end in most stereo systems
• Stereo Amplifiers — the amplifier end when you run separates

Frequently Asked Questions

Does bulk cable come with connectors?

It arrives as bare cable, without connectors. Add spades or bananas from our Speaker Cable Connectors collection before you connect it.

How is it sold?

By the length in the listing's title, either by the foot or on a spool. Measure your runs first, and order a little extra.

Can it go inside a wall?

Yes. AudioQuest rates Rocket 11 bulk cable CL3/FT4 for in-wall use. Check your local code for what your installation needs.

What gauge is Rocket 11?

It is 14 AWG, Long-Grain Copper in a Semi-Solid Concentric design.

Why Audio Advisor?

• 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
• 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
• Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
• Free Shipping — On orders over $49, delivered to your door.
• Flexible Payment Options — Financing available so you can start listening now.

Learn More

Want to learn more about speaker cables, in-wall wiring, or matching an amplifier to your speakers? Visit our Learning Center for guides, tips, and expert advice.