Cambridge Audio AXA35 Integrated Amplifier
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
- What Hi-Fi? – Five Stars
- What Hi-Fi? – Award-Winning / Five-Star Recommended Amplifier
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
Cambridge Audio Built the AXA35 Around Your Turntable
Cambridge Audio has designed hi-fi in London since 1968. The AX range is where that engineering meets a budget, and the AXA35 sits near the bottom of it. It also does something most amplifiers at this size skip. It takes a turntable straight in.
Power is 35 watts per channel into 8 ohms. The case is the classic 430mm hi-fi width, 83mm tall and 335mm deep, and it weighs 5.6kg. An LED dot matrix display reads out source and volume.
Six Ways In, One of Them for Vinyl
Count the inputs and you reach six. Four RCA line inputs take a CD player, a streamer, or a tape deck. A dedicated phono input handles a moving-magnet cartridge. A 3.5mm Aux jack on the front takes a phone directly.
Outputs are simpler: speaker binding posts, a Rec Out for a recorder, and a USB socket that supplies 5V to charge a phone. A 6.35mm headphone jack on the front mutes the speakers the moment you plug in.
Tone Controls You Can Actually Reach
Separate bass and treble give shelving boost or cut up to 10dB, at 100Hz and 10kHz. Balance adjusts through the front-panel menu or the remote. That remote also drives Cambridge’s AXC35 and AXC25 CD players, so one handset runs the pair.
The Transformer Cambridge Borrowed From Further Up the Range
Inside sits a toroidal transformer, a part Cambridge normally saves for its pricier models. Toroidal designs run quieter and leak less stray magnetic field than the cheaper laminated kind. That matters in a shallow case.
Total harmonic distortion stays under 0.01% at 1kHz, and under 0.15% across 20Hz to 20kHz. Frequency response runs from 5Hz to 50kHz within 3dB. Signal-to-noise is above 82dB unweighted, and the damping factor is above 50.
It Shuts Itself Off When You Forget
Auto Power Down ships enabled and drops the amp to standby after 20 minutes of silence. Hold the power button to switch that off. Standby draw is under half a watt.
What Reviewers Are Saying
Ian White reviewed the AXA35 for eCoustics on July 16, 2022. He reported that it "sounds surprisingly larger than it looks", and found the build "well assembled and finished."
Ashley reviewed it for Audio Appraisal on February 16, 2022. "The headphone output on these is excellent," the review says, though it "does have an audible background hiss which is a shame, but it has plenty of power."
Who Is This Integrated Amplifier Best For?
- You play vinyl on a moving-magnet cartridge — the phono stage is built in, so no outboard preamp is needed
- You have several sources to juggle — four line inputs plus a front Aux jack keep everything plugged in
- You listen on headphones after hours — the front jack drives 32 to 600 ohm loads and cuts the speakers on its own
- You want tone controls back — bass and treble each swing 10dB, which helps in a bright or a boxy room
- If your sources are digital, budget for a converter. The AXA35 is purely analog, so a CD transport, a TV, or a computer feeds it through a DAC. See our Digital to Analog Converters
How Does It Connect to Your System?
Speakers go to the binding posts, and your turntable goes to the phono input with its ground wire to the ground post. A CD player or streamer takes any of the four line inputs. A phone plugs into the front Aux jack.
Pairs Well With
Building around the AXA35? Here are some good companions:
- Turntable: Put the built-in MM phono stage to work — see our Turntables
- Speakers: 35 watts suits an efficient 8-ohm standmount pair — see our Bookshelf Speakers
- Headphones: The front jack handles 32 to 600 ohm loads — see our Headphones
- Cables: Good interconnects finish the system — see our Interconnect Cables
Frequently Asked Questions
How much power does the AXA35 deliver?
35 watts per channel into 8 ohms. Cambridge Audio specifies a nominal 8-ohm speaker load.
Does it have a phono stage for my turntable?
Yes, on a dedicated phono input for moving-magnet cartridges. A moving-coil cartridge needs an outboard phono preamplifier.
What is the USB socket for?
Charging. It supplies 5V at 500mA for a connected device. Audio comes in through the analog inputs.
What kind of headphone output does it have?
A 6.35mm jack on the front panel. Cambridge Audio recommends headphones between 32 and 600 ohms.
What is the warranty?
Cambridge Audio covers the AXA35 for 2 years. Registering the amplifier does not extend that term.
See It in Action
Steve Guttenberg Audiophiliac puts the AXA35 through its paces:
A British Audiophile takes a closer look at what the entry-level AX range gets right:
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we’ve helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it’s right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about integrated amplifiers, phono stages, or building your first two-channel system? Visit our Learning Center for guides, tips, and expert advice.
- 35 watts per channel into 8 ohms
- Built-in Moving Magnet (MM) phono stage for direct turntable connection
- Four stereo RCA line-level inputs for CD players, streamers, DACs and other sources
- Front-panel 3.5mm auxiliary input for convenient connection of portable audio devices
- Front-panel 6.35mm (1/4") headphone output for private listening
- Bass and treble tone controls
- Balance control for fine-tuning left/right channel levels
- Bright dot-matrix display clearly shows source selection and volume level
- Recording output for connection to compatible recording equipment
- Rear USB port provides 5V power for compatible accessories
- Full-size speaker binding posts provide secure speaker-cable connections
- Slim, minimalist chassis with Cambridge Audio's Lunar Grey finish
- Full-function remote control included
- Less than 0.5-watt standby power consumption
- Simple analog-focused design without unnecessary digital circuitry
- Product Type: Stereo Integrated Amplifier
- Power Output: 35 watts per channel into 8 ohms
- THD: <0.01% at 1kHz, 80% of rated power
- THD: <0.15%, 20Hz–20kHz, 80% of rated power
- Frequency Response: 5Hz–50kHz (-3dB)
- Signal-to-Noise Ratio: >82dB, unweighted, referenced to 1W
- Input Impedance: 47k ohms
- Power Amplifier Damping Factor: >50
- Analog Inputs: 4 x stereo RCA line-level
- Phono Input: 1 x Moving Magnet (MM) phono
- Front Auxiliary Input: 1 x 3.5mm stereo
- Headphone Output: 1 x 6.35mm (1/4")
- Recording Output: Stereo RCA
- USB: 5V power output
- Speaker Outputs: Stereo binding posts
- Bass Control: ±10dB at 100Hz
- Treble Control: ±10dB at 10kHz
- Maximum Power Consumption: 260W
- Standby Power Consumption: <0.5W
- Dimensions (H x W x D): 3.3" x 16.9" x 13.2" (83 x 430 x 335mm)
- Weight: 12.3 lbs. (5.6kg)
- Finish: Lunar Grey
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




