Cardas Audio Clear Beyond Speaker Cable - 2.0 Meter - Banana to Banana - Pair

Cardas Clear Beyond Is Cardas's Flagship Speaker Cable

Clear Beyond is Cardas's flagship speaker cable. Cardas built it to go beyond reference performance in no-compromise systems where the speakers draw large amounts of current. It is absolutely neutral and transparent, Cardas says, with amazing dynamics and zero compression.

Cardas makes it by hand in Bandon, Oregon. Clear Beyond is an eight-conductor cable, 8x10.5 AWG, with spades or bananas forged on at 10,000 psi. It can be internally bi-wired or bi-amped. This 2.0-meter length is about 6.6 feet long.

Other length & termination options are available. Call us to discuss your needs.

The Patented Idea Behind Every Clear Cable

Like every cable in Cardas's Clear line, it uses Matched Propagation, covered by George Cardas's 2008 patent. Cardas controls the conductor's internal geometry so its propagation rate matches that of the insulation around it. Clear Beyond's eight conductors sit on a Kevlar core, with gauge sizes from ultra-fine 41 AWG to 25 AWG.

Cardas uses its Grade 1, 99.9999% pure oxygen-free copper, with a clear coating on every strand that Cardas says prevents oxidation. The company says its copper is mined in the Southwest USA and processed in the Northeast.

No Solder, Just 10,000 PSI of Pressure

The spades or bananas are forged on with 10,000 psi of pressure, a solder-free process in which the copper of the conductor and the connector fuse together as one, Cardas says.

Each Litz conductor is built from many fine strands, each with its own coating. The smallest wires sit at the center, and each layer grows in size at the Golden Ratio, 1:1.618, Cardas says. Its Cross-field construction reverses every other layer.

The conductors are insulated in FEP tape and wound with anti-static PTFE air tubes. A flexible TPR jacket finishes the cable, which measures 0.934 inches across. Those eight conductors are what let Cardas build it bi-wired or bi-amped.

What Reviewers Are Saying

The Absolute Sound named Clear Beyond to its 2023 Editors' Choice list, writing, "This thick blue cable takes the patented technologies in Cardas cables to new heights." Its Fall 2024 Buyer's Guide marks it an Editors' Choice again.

Gregory Petan reviewed a full Clear Beyond system for Positive Feedback on June 24, 2020. He wrote, "So transparent is the Clear Beyond, it is the perfect interface for those who want as little between their components as possible."

Who Is This Speaker Cable Best For?

• You are building at the top of the range — Clear Beyond is Cardas's flagship speaker cable
• Your speakers draw a lot of current — Cardas built Clear Beyond for exactly those speakers
• Your speakers have two pairs of binding posts — Clear Beyond can be internally bi-wired or bi-amped from one cable
• You want a cable reviewers stand behind — The Absolute Sound lists it as an Editors' Choice in 2023 and 2024
• Your speakers have one pair of binding posts — order a standard listing, not a bi-wire one. Bi-wire versions need two pairs of posts on each speaker, so the standard cable is your fit

How Does It Connect to Your System?

Turn the amplifier off. Connect the cable to your speakers first, then to your amplifier's speaker outputs, red to red and black to black. Do the same for the second speaker.

The Measuring Mistake That Leaves You Inches Short

Speaker cable is cut for one room. Measure the path the cable will really take, around furniture and along the baseboard. Then add a little slack. As Cardas puts it, "A cable that's just long enough usually turns out to be just not long enough." Keep the left and right runs the same length, as Cardas recommends, even when one speaker sits closer.

Which Connector Holds Up Best Over the Years?

Spades clamp under a binding post and hold tight. Bananas push straight in, so they connect fastest. Bare wire fits almost anything, but we suggest avoiding it. Bare copper oxidizes quickly, and Cardas notes that copper oxide is not a good conductor. If you use bare wire, re-strip the ends when the copper darkens.

Two Pairs of Binding Posts? Here's What That Means

A bi-wire cable has four connectors at the speaker end instead of two. It is made for speakers with two pairs of binding posts. Your speaker's manual shows which links to remove.

Tighten the connections, power up, and play something you know well.

When Is It Time to Upgrade?

Speaker cable often stays put for years, so it tends to be the last thing upgraded. Look again when something else changes. Moving from bookshelf speakers to floorstanders is the big one. In our experience, about nine in ten people who make that move keep their old speaker cable. A stronger amplifier, a longer run, or darkened ends are the other signs.

Pairs Well With

A speaker cable joins your amplifier to your speakers. These are the categories on either end of it.

• Floorstanding Speakers — the best time to rethink your speaker cable
• Bookshelf Speakers — the speaker end in a smaller room
• Integrated Amplifiers — the amplifier end in most stereo systems
• Stereo Amplifiers — the amplifier end when you run separates

Frequently Asked Questions

Can Clear Beyond be bi-wired or bi-amped?

Yes. With eight conductors, Cardas can build it internally bi-wired or bi-amped.

Which end goes to the amplifier?

Cardas suggests installing its cables as if they are directional, so the signal flows the same way the text reads on the jacket. Turn the amplifier off, and connect the speakers first.

Does it need to break in?

Cardas says break-in takes at most 200 hours, and usually about half that. Playing music through the cable is the best way to do it.

What warranty does Cardas give?

Cardas backs its cables with a lifetime warranty covering bad or intermittent internal connections, shorts and loose connectors.

Is there a step up?

Clear Beyond is Cardas's flagship speaker cable. If you want to go further, call us and we will talk through the whole system.

See It in Action

Audio Advisor visits Cardas in Bandon, Oregon, to show the solder-free compression forging Cardas uses on its forged speaker cable terminations.

Need a Different Length or Connector?

The most popular configurations are shown on this page. If your system requires a different length or termination, call our audio experts. We’ll help you choose the right configuration and arrange a custom cable for your system.

Why Audio Advisor?

• 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
• 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
• Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
• Free Shipping — On orders over $49, delivered to your door.
• Flexible Payment Options — Financing available so you can start listening now.

Learn More

Want to learn more about speaker cables, speaker placement, or matching an amplifier to your speakers? Visit our Learning Center for guides, tips, and expert advice.