Dynaudio Evoke 20 Bookshelf Speakers - Black - Pair
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
Dynaudio Evoke 20: Full-Size Stand-Mount Speakers for Any Room
The Dynaudio Evoke 20 is the larger of the two stand-mount speakers in Dynaudio's Evoke series. It is a passive, 2-way design with a 28mm soft-dome tweeter and a powerful 18cm mid/bass driver, in a rear-ported bass reflex cabinet.
Dynaudio rates its frequency range at 40Hz to 23kHz (+/-3dB). This pair comes in Black High Gloss with black grilles.
Cerotar Tweeter with Hexis
The 28mm Cerotar is Dynaudio's own design, based on its Esotar Forty anniversary tweeter and the Esotar3. Behind the precision-coated soft dome sits Hexis, an inner dome that shapes airflow to smooth out the frequency response.
18cm Esotec+ MSP Mid/Bass Driver
The 0.4mm-thick cone is one piece of MSP (Magnesium Silicate Polymer), with Balance Ribs around the center. It uses a 52mm aluminium voice-coil, an aramid fibre spider and a Ferrite+ magnet system. Dynaudio describes it as a long-throw design for better low-frequency dynamics.
Tapered, Rounded Cabinet
The cabinet is tapered and rounded, and the driver screws are hidden behind one-piece trim rings. Dynaudio uses improved lacquering techniques for the high-gloss finishes.
How the Evoke 20 Fits Your System
The Evoke 20 is a passive speaker, so it needs a stereo amplifier or AV receiver to drive it. It has a sensitivity of 86dB, a rated impedance of 6 ohms and long-term power handling of 180W. It works as a stereo pair or as front speakers in a home theater with the Evoke 25C center.
It is not a powered or wireless speaker and has no built-in amplifier or Bluetooth. The port is on the back, and Dynaudio says its speakers perform best well away from walls, ideally at least 18 inches (50cm). Allow for a cabinet about 12 1/2 inches deep with the grille on.
Who Are These Speakers Best For?
- Stereo listeners — A full-size 2-way pair for music, used on stands.
- Buyers wanting the larger Evoke stand-mount — The bigger of the two Evoke stand-mounts, with an 18cm mid/bass driver.
- Home theater fronts — Pairs with the Evoke 25C center and other Evoke models.
- Design-minded homes — A curved high-gloss cabinet with no visible screws.
- Not for — Anyone wanting powered, wireless speakers or a speaker to push against a wall.
How Does It Connect to Your System?
- Run speaker cable from your amplifier or receiver to the binding posts on the back of each speaker.
- Place the speakers about 6 to 13 feet (2 to 4m) apart, with your seat at a similar or slightly greater distance.
- Keep them at least 18 inches (50cm) from walls where you can.
- Dynaudio recommends speaker stands for the best performance, with rubber pads holding each speaker to the stand.
- Try angling the speakers inward a little if the stereo image needs more focus.
Pairs Well With
Complete your system with these:
Frequently Asked Questions
Is the Evoke 20 sold as a pair?
Yes. This listing is for a pair, and Dynaudio packs two speakers per box.
Do the Evoke 20 speakers need an amplifier?
Yes. They are passive speakers. Connect them to a stereo amplifier or AV receiver with speaker cable.
Can I put them on a shelf instead of stands?
You can, but Dynaudio says stands usually give the best performance. On a shelf near a wall you can expect more bass and a less focused stereo image.
How low does the Evoke 20 go?
Dynaudio rates it from 40Hz to 23kHz within 3dB.
How long is the warranty?
Dynaudio's warranty follows the legal standard in the country of purchase. If you register the speakers on Dynaudio's website within 12 months of purchase, the warranty is extended to 96 months (8 years) in total.
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am – 6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about bookshelf speakers? Visit our Learning Center for guides, tips, and expert advice.
- 28mm Cerotar soft-dome tweeter with Hexis inner dome
- 18cm Esotec+ MSP mid/bass driver with 52mm voice-coil
- 2-way design, 2nd-order crossover at 3,200Hz
- Rear-ported bass reflex cabinet
- 40Hz to 23kHz frequency range (+/-3dB)
- Tapered, rounded cabinet with hidden screws
- Black High Gloss finish; sold as a pair
- Type: Bookshelf (stand-mount) speaker, passive
- Series: Dynaudio Evoke
- Crossover: 2-way
- Crossover Frequency: 3,200 Hz
- Crossover Topology: 2nd order
- Tweeter: 28mm Cerotar soft dome with Hexis
- Mid/Bass Driver: 18cm MSP
- Box Principle: Bass reflex, rear ported
- Sensitivity (2.83V/1m): 86 dB
- IEC Long Term Power Handling: 180 W
- Rated Impedance: 6 ohms
- Frequency Range (+/-3dB): 40 Hz - 23 kHz
- Dimensions without Grille (W x H x D): 8 1/2 x 15 x 12 1/8 in (215 x 380 x 307 mm)
- Dimensions with Grille (W x H x D): 8 1/2 x 15 x 12 1/2 in (215 x 380 x 317 mm)
- Weight: 21.8 lbs (9.9 kg) each
- Finish: Black High Gloss
- Grille: Black
- Quantity: Pair (2 speakers per box)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.





