iFi PowerStation Power Conditioner
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
Noise Canceling for Your Wall Outlet
The iFi PowerStation is an eight-outlet power conditioner that cleans mains noise with active noise cancellation. It works on the same idea as noise-canceling headphones. A circuit builds a signal that mirrors the incoming noise in opposite phase, and the two cancel.
Eight US outlets sit in a dark anodized aluminum chassis. The total load rating is 10 amps. Surge protection is built in, and a 1.5-meter power cable comes in the box, so you can plug in the day it arrives.
Two front-panel LEDs check your wall outlet for reversed polarity and a missing earth ground. Green means normal. Red tells you something in the house wiring needs attention before it causes trouble in your system.
Active, Passive and Isolated: How It Cleans the Line
iFi’s Active Noise Cancellation II is rated at more than 40dB of noise reduction, which is more than 100 times. Extra passive filtering on each outlet handles the very highest frequencies, the kind that wireless transmitters typically create.
Each outlet sits in its own isolation chamber. Noise from a switch-mode supply on one outlet cannot cross into the next one. The busbars and outlet contacts use PurCopper, which iFi describes as 99.9999 percent pure oxygen-free copper. Internal wiring is heavy-gauge 13 AWG.
The surge protection is rated at up to 30,000 amps at 1,000 volts over 10 microseconds. If the line sees too much voltage or a short, the PowerStation cuts power. It takes several minutes to reboot, and if the fault persists it stays off to protect your system.
Who Is This Power Conditioner Best For?
- You own a DAC, streamer or phono stage. — Quiet, isolated outlets keep noise from a neighboring component away from your sensitive source gear
- You hear hum or buzz and suspect the wall. — The polarity and earth LEDs show wiring faults at a glance, and the banana socket gives you a supplemental ground
- You run a mix of digital and analog gear. — Separate chambers let you keep switching supplies and analog stages from contaminating each other on one conditioner
- You want surge protection plus noise control in one box. — Surge protection and an over-voltage cut-out sit alongside the filtering, so one unit does both jobs
- Your system draws more than 10 amps in total. — The PowerStation is rated for 10 amps across all eight outlets, about 1,200 watts at 120V. A rack with several large amplifiers needs a higher-current unit from our power conditioners
How Does It Connect to Your System?
Plug the PowerStation directly into a wall outlet. iFi’s manual warns against plugging it into another power tap. Use the supplied 1.5-meter cable at the IEC inlet, then switch it on.
Plug your components into the eight outlets. iFi suggests putting digital gear on one side and analog gear on the other. Check that both front LEDs are green. If they are not, the problem is in the wall wiring.
Plug in, check the lights, play.
Pairs Well With
Building your system? Here are some great companions for the iFi PowerStation:
- Power cables if you want to move beyond the cable in the box
- Music streamers that benefit from isolated, noise-canceling outlets
- DACs to plug into the digital side of the unit
- Integrated amplifiers to power from the analog side
Frequently Asked Questions
What is in the box?
The iFi PowerStation, a 1.5-meter IEC power cable and a user manual. The US version has eight outlets. The unit weighs 1.98kg (4.37 pounds) and measures 478 x 96 x 76mm.
How much gear can it run?
The PowerStation is rated for 10 amps in total. At 120V that is about 1,200 watts shared across all eight outlets. That covers a typical streamer, DAC, preamp and integrated amplifier with room to spare.
Can I mix digital and analog components on it?
Yes. iFi suggests grouping digital gear on one side and analog gear on the other. Each outlet is also isolated in its own chamber, so noise from one component stays out of its neighbors.
What does the banana socket do?
It accepts a supplemental earth wire for homes where the outlet ground is missing or poor. The Intelligent Ground circuit is designed not to form a ground loop if your system is already earthed.
Will it fix transformer hum from DC on the mains?
iFi lists noise cancellation, filtering and surge protection for the PowerStation, and DC blocking is not among them. For transformer hum, add a DC blocker such as the iFi DC Blocker+ or the Audiolab DC Block 6.
What is the warranty?
iFi gives the PowerStation a 12-month limited warranty. Keep your receipt as proof of purchase.
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we’ve helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it’s right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about AC noise, ground loops, or protecting your system from surges? Visit our Learning Center for guides, tips, and expert advice.
- Active Noise Cancellation2 technology
- Solid PurCopper™ Bus-Bars for power transfer
- Individual noise isolation chambers - for each outlet
- High performance PurCopper™ outlets
- Heavy OFHC Continuous Cast Copper internal wiring
- Polarity and ground diagnostic system
- Advanced surge and transient protection system
- Dedicated chassis grounding system
- 2500W-10A Max 230V~
- Number of outlets: 8 (US version) — NEMA 5-15, individually shielded, PurCopper contacts
- Mains input: IEC C14, detachable cord
- Operating voltage: 90V – 265V AC (universal — US 120V, EU 230V, etc.)
- Maximum total load: 2,500W at 230V / approximately 1,200W at 120V US (10A continuous)
- Noise reduction: greater than 40 dB (greater than 100×) across the full audio-relevant frequency range
- Active filtering: Active Noise Cancellation II circuit (active inverse-noise generation, low-kHz to low-MHz range)
- Passive filtering: per-outlet high-frequency RF/EMI filter (low-MHz to high-MHz range)
- Surge protection: maximum 30,000 amps at 1,000 V over 10 microseconds, non-sacrificial, automatic shutdown with self-reset when conditions are safe
- Diagnostics: polarity-reversal LED indicator and ground/earth-presence LED indicator
- Intelligent Ground: 4mm banana socket for supplemental earth (does not create ground loops with existing earthed systems)
- Outlet isolation: each outlet in its own enclosed chamber with EVA vibration damping
- Internal conductors: PurCopper busbars (99.9999% pure OFHC continuous-cast copper) and PurCopper outlet contacts; OFHC continuous-cast copper internal wiring
- Chassis: dark anodized aluminum unibody with dedicated chassis grounding system
- Dimensions (L × W × H): 18.8” × 3.7” × 2.9” (478 × 96 × 76 mm)
- Weight: 4.37 lbs (1.98 kg)
- Warranty: 12-month manufacturer’s limited warranty
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.






