Klipsch Reference RF-7 III Floorstanding Speaker - Each

A High-Sensitivity Flagship for Serious Output

The Klipsch Reference RF-7 III is a 2-way floorstanding speaker with a 1.75-inch titanium compression driver on an 8.5-inch Tractrix horn, over dual 10-inch Cerametallic woofers, in a dual-chambered cabinet built for serious dynamic range.

Klipsch rates sensitivity at 100 dB into a nominal 8 ohms, with 250 watts of continuous power handling — among the highest-output towers in this collection, at home in a large room or a home theater that needs real headroom.

The cabinet is available in Black Ash or Walnut, and sold each, so a stereo pair is two — order one to match an existing speaker, or a matching pair to start a system from scratch.

Where the High Sensitivity Earns Its Keep

A Large Compression Driver Over Dual 10-Inch Woofers

The 1.75-inch titanium compression driver sits on an 8.5-inch square, 90° x 90° Tractrix horn, crossing over at 1,300 Hz to dual 10-inch Cerametallic woofers on cast-aluminum frames with dual shorting-ring magnets for low distortion at high output.

Dual-chamber, bifurcated rear-firing Tractrix ports move real volumes of air quietly — the same engineering approach behind this speaker's reputation for playing loud and clean at high volume, without strain or port noise creeping into the sound.

The Numbers, and What They Ask of Your Amplifier

Klipsch quotes a frequency range of 32 Hz to 25 kHz within 3 dB. Sensitivity is 100 dB, nominal impedance is 8 ohms compatible, and Klipsch rates power handling at 250 watts continuous, 1,000 watts peak.

Dual binding posts support bi-wiring and bi-amping. At 97 pounds each, the cabinet includes an integrated plinth base for stability, since a speaker built for output this serious needs a genuinely solid foundation underneath it.

What Reviewers Are Saying

Michael S. Palmer, HighDefDigest, called the RF-7 III "powerful, bold, articulate, and clear, delivering a performance value that I've only heard bested in speakers that cost two-to-three times more," naming it Highly Recommended.

Tristan Jacquel, Son-Video, wrote that "the soundstage is wide, remarkably spacious and it feels great," adding that the "RF-7 MKIII inspires the listener to sit down...to embark on a vibrant musical journey" across jazz, opera, and rock alike.

Who Is This Floorstanding Speaker Best For?

• You want serious dynamic headroom, not just loudness — 100 dB sensitivity and a 1,000-watt peak rating built for real dynamic swings, not just background listening
• You have a large room or a home theater to fill — among the highest-output towers in this collection
• You want a genuine reviewer-verified value at this price — called comparable to speakers costing two to three times as much
• You want one speaker per cabinet, priced and shipped that way — the RF-7 III is sold each, so order two for a stereo pair
• You want real floorstanding bass without a separate subwoofer — the RF-7 III reaches to 32 Hz within 3 dB on its own. For the deepest home-theater effects, add one of our subwoofers and let the towers do what they do best

How Does It Connect to Your System?

Give the cabinet a few inches of clearance from the wall behind it for its dual rear ports to breathe. Dual binding posts accept a single-wire run, or a bi-wire/bi-amp connection if your amplifier supports it.

At nearly 100 pounds each, plan for a firm, level floor and enough clearance to move the cabinet into final position before connecting cables.

Two cables, two speakers, and you are listening.

Pairs Well With

What finishes the system around a pair of RF-7 III towers:

• Stereo amplifiers — a separate power amp gives this speaker's 1,000-watt peak rating real headroom to work with
• AV receivers — high sensitivity and serious output make this a genuine home-theater front-channel option, too
• Speaker cables — single-wire or bi-wire runs, since this model supports both
• Audio racks — house the electronics driving a speaker built for real dynamic range

Frequently Asked Questions

Is the price for one speaker or a pair?

One. The RF-7 III is sold each, so order two for a stereo pair, or one to match an existing speaker.

What comes in the box?

The speaker with its magnetic grille and the owner's manual.

What amplifier do I need?

Klipsch rates power handling at 250 watts continuous, 1,000 watts peak. At 100 dB sensitivity, it plays loud from a modest amplifier, but a separate power amp lets it use its full dynamic range.

Can I bi-wire the RF-7 III?

Yes. Dual binding posts support bi-wiring and bi-amping.

Is this a home theater speaker or a music speaker?

Both. The high sensitivity and dynamic headroom that make it a strong home-theater front channel also make it an engaging speaker for music at any volume.

What finishes are available?

Black Ash and Walnut.

See It in Action

Z Reviews reviews the RF-7 III:

Woody's Soundup reviews the RF-7 III:

Why Audio Advisor?

• 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
• 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
• Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
• Free Shipping — On orders over $49, delivered to your door.
• Flexible Payment Options — Financing available so you can start listening now.

Learn More

Want to learn more about speaker placement, bi-wiring, or matching an amplifier to a high-sensitivity speaker? Visit our Learning Center for guides, tips, and expert advice.