MoFi Electronics SourcePoint V10 Loudspeaker - Black - Each

MoFi's Flagship: Five Drivers a Side, Built Around One Point Source

The MoFi Electronics SourcePoint V10 Master Edition is a 3-way floorstanding speaker designed by Andrew Jones, built around a 10-inch concentric point-source driver — a 1.25-inch soft dome tweeter at the acoustic center of the midrange cone — over two active 10-inch woofers and two rear-firing 10-inch passive radiators.

MoFi rates sensitivity at 91 dB into a nominal 6 ohms, and rates power handling at 200 watts — a genuinely flagship-scale cabinet, at 160 pounds each, built to fill a large room without strain.

The cabinet is available in Walnut or Black Ash real wood veneer, and sold each, so a stereo pair is two — order one to match an existing speaker, or a matching pair to start a system from scratch.

Where the Extra Drivers Earn Their Keep

Five Drivers a Side: One Point Source, Four More for Bass

The 10-inch concentric driver, with its 1.25-inch tweeter mounted at the midrange cone's acoustic center, includes a 3-position Tweeter Level switch (Low, Mid, High) built into the crossover, for tuning treble presence to your room without touching signal purity elsewhere.

Two front-mounted 10-inch woofers, crossing over at 130 Hz, use the same dual opposing neodymium magnet motor found elsewhere in MoFi's lineup, while two rear-firing 10-inch passive radiators — unconnected to the crossover — reinforce bass down to 27 Hz without adding their own distortion or turbulence.

The Numbers, and What They Ask of Your Amplifier

MoFi quotes a frequency range of 27 Hz to 30 kHz. Sensitivity is 91 dB, nominal impedance is 6 ohms (4.5 ohms minimum), and MoFi rates power handling at 200 watts. An independent bench measurement from Erin's Audio Corner found sensitivity closer to 89 dB in practice.

Crossover points sit at 130 Hz and 1.4 kHz, with dual binding posts (bi-wire/bi-amp capable) shipping with factory shorting straps in place. Every driver and passive radiator sits in its own isolated internal chamber for cabinet stiffness.

What Reviewers Are Saying

Jason Kennedy, the-ear.net, wrote that "this is a lot of loudspeaker for the money," adding that "if you want to go large with your speakers the MoFi V10 ME is a hard act to beat."

Who Is This Floorstanding Speaker Best For?

• You want MoFi's flagship, not just their entry floorstander — five 10-inch drivers a side built around the same concentric point-source technology, scaled to statement size
• You want genuine deep bass without a separate subwoofer's box — dual passive radiators reinforce output to 27 Hz, working alongside two dedicated active woofers
• You want to fine-tune treble to your room — a 3-position Tweeter Level switch adjusts presence without an equalizer
• You want one speaker per cabinet, priced and shipped that way — the SourcePoint V10 is sold each, so order two for a stereo pair
• You want real floorstanding bass without a separate subwoofer — the SourcePoint V10 reaches to 27 Hz on its own. For the deepest home-theater effects, add one of our subwoofers and let the towers do what they do best

How Does It Connect to Your System?

Set the Tweeter Level switch to Mid to start, moving to Low in a bright, reflective room or High in one heavily damped with furnishings. Dual binding posts accept a single-wire run with the factory shorting straps in place, or a bi-wire/bi-amp connection with them removed.

At 160 pounds each, plan for a firm, level floor and enough clearance to move the cabinet into final position before connecting cables. Keep the rear-firing passive radiators clear of the wall behind them.

Two cables, two speakers, and you are listening.

Pairs Well With

What finishes the system around a pair of SourcePoint V10 towers:

• Stereo amplifiers — a separate power amp gives a flagship-scale cabinet like this real headroom to work with
• Integrated amplifiers — a quality integrated amplifier with real current on tap drives it well
• Speaker cables — single-wire or bi-wire runs, since this model supports both
• Audio racks — house the electronics driving MoFi's flagship tower

Frequently Asked Questions

Is the price for one speaker or a pair?

One. The SourcePoint V10 is sold each, so order two for a stereo pair, or one to match an existing speaker.

What comes in the box?

The speaker with its magnetic grille, convertible cone/flat feet for carpet or hard floors, and the owner's manual.

What amplifier do I need?

MoFi rates power handling at 200 watts into a 6-ohm load (4.5 ohms minimum). At 91 dB sensitivity, most quality amplifiers drive it well, though a genuine power amp lets a cabinet this large show its full dynamic range.

Can I bi-wire the SourcePoint V10?

Yes. Dual binding posts ship with factory shorting straps for single-wire use; remove them to bi-wire or bi-amp.

What does the Tweeter Level switch do?

It's a 3-position control (Low, Mid, High) built into the crossover that adjusts treble presence to suit your room, without an external equalizer.

What finishes are available?

Walnut, a clear-coated real wood veneer with book-matched grain, and Black Ash, a satin-painted real ash veneer.

See It in Action

The Absolute Sound introduces the SourcePoint V10:

Erin's Audio Corner reviews the SourcePoint V10:

Why Audio Advisor?

• 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
• 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
• Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
• Free Shipping — On orders over $49, delivered to your door.
• Flexible Payment Options — Financing available so you can start listening now.

Learn More

Want to learn more about speaker placement, bi-wiring, or matching an amplifier to your speakers? Visit our Learning Center for guides, tips, and expert advice.