Monitor Audio Gold 500 6G Floorstanding Speakers - Macassar - Pair

A Ribbon-Derived Tweeter and Hexagonal Cones, Trickled Down From the Flagship

The Monitor Audio Gold 500 6G is a 3-way floorstanding tower and the flagship of the Gold Series, built around an MPD III (Micro Pleated Diaphragm) tweeter — a folded-ribbon design derived from Monitor Audio's flagship Hyphn and Platinum Series — over a 3-inch HDT C-CAM midrange driver and two 8-inch HDT C-CAM bass drivers.

Monitor Audio recommends amplifiers between 130 and 600 watts, with an optimal match around 300 watts, and rates sensitivity at 88.5 dB into a nominal 4 ohms — a genuinely demanding load.

The cabinet is available in High Gloss Black, Satin White, or Macassar — a man-made veneer styled after real ebony, with a lower carbon impact — and sold as a pair, ready for stereo.

Where the Flagship-Derived Technology Earns Its Keep

An MPD III Tweeter and Hexagonal HDT Cones

The MPD III tweeter's folded ribbon extends output beyond 60 kHz, well past what a typical dome or AMT tweeter reaches, crossing over to the midrange driver at 2.6 kHz.

Both the midrange and bass drivers use Monitor Audio's HDT (Hexagonal Diaphragm Technology) cones — a honeycomb core between aluminum and carbon-fiber skins, derived from the flagship Hyphn and Platinum Series, that pushes cone breakup roughly 10 percent higher in frequency than the cones used elsewhere in Monitor Audio's lineup.

The Numbers, and What They Ask of Your Amplifier

Monitor Audio quotes an in-room frequency response of 25 Hz to 60 kHz, and a free-field response of 44 Hz to 60 kHz, both at -6dB. Sensitivity is 88.5 dB, nominal impedance is 4 ohms (4 ohms minimum at 150 Hz), and Monitor Audio recommends amplifiers between 130 and 600 watts.

Crossovers sit at 700 Hz and 2.6 kHz. The cabinet is rear-ported using Monitor Audio's HiVe II port design, tuned to 33 Hz for genuine low-end extension without excess cabinet noise.

What Reviewers Are Saying

Chris Baillie, the-ear.net, wrote that "there proved much to enjoy here, especially in the glorious soundstage that these speakers throw into the room," imaging "well beyond the cabinets and forward of them in a solid and often startlingly believable manner."

Baillie called the Gold 500 6G "a fine addition to this competitive area of the market" that "should be on the must hear list for anyone with this kind of budget."

Who Is This Floorstanding Speaker Best For?

• You want Monitor Audio's flagship, not just their entry floorstander — an MPD III ribbon-derived tweeter and hexagonal HDT cones, both trickled down from the Hyphn and Platinum Series
• You want a soundstage reviewers single out as exceptional — independently praised for imaging that extends well beyond the cabinets themselves
• Your amplifier has real current and headroom to offer — a 4-ohm load and a 130-to-600-watt recommended range reward a genuinely powerful amplifier
• You want a finish that looks the part of a flagship — High Gloss Black, Satin White, or the exclusive Macassar veneer
• You want real floorstanding bass without a separate subwoofer — the Gold 500 6G reaches to 25 Hz on its own. For the deepest home-theater effects, add one of our subwoofers and let the towers do what they do best

How Does It Connect to Your System?

Connect each tower to an amplifier or receiver's speaker outputs using the rear binding posts. A 4-ohm nominal load calls for an amplifier genuinely comfortable driving a demanding load, ideally in the 130-to-600-watt recommended range.

Because the cabinet is rear-ported, give it real breathing room from the wall behind it — moving it closer adds bass warmth, pulling it out tightens the low end.

Two cables, two speakers, and you are listening.

Pairs Well With

What finishes the system around a pair of Gold 500 6G towers:

• Stereo amplifiers — a separate power amp with real current is the natural match for this tower's 4-ohm load
• Integrated amplifiers — a high-current integrated amplifier rated well within the recommended range
• Speaker cables — premium cable for a flagship-tier tower
• Audio racks — house the electronics driving Monitor Audio's flagship

Frequently Asked Questions

Is the price for one speaker or a pair?

The Gold 500 6G is sold as a pair — the listed price is for two towers, ready for stereo.

How much amplifier power do I need?

Monitor Audio recommends amplifiers between 130 and 600 watts, with an optimal match around 300 watts. The 4-ohm nominal load calls for an amplifier genuinely comfortable driving a demanding impedance, not just one rated for the wattage.

What is the MPD III tweeter?

A folded-ribbon Micro Pleated Diaphragm tweeter, derived from Monitor Audio's flagship Hyphn and Platinum Series, extending output beyond 60 kHz.

What finishes are available?

High Gloss Black, Satin White, and Macassar — a man-made veneer styled after real ebony, chosen for a lower carbon impact than the genuine material.

Do I need a subwoofer with these speakers?

Not necessarily. The Gold 500 6G reaches to 25 Hz on its own, though a subwoofer can still add reach for home theater use.

See It in Action

Soundline Audio New Zealand presents the Monitor Audio Gold 500 6G.

My Audio Test demonstrates the Monitor Audio Gold 500 6G.

Why Audio Advisor?

• 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
• 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
• Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
• Free Shipping — On orders over $49, delivered to your door.
• Flexible Payment Options — Financing available so you can start listening now.

Learn More

Want to learn more about speaker placement, amplifier matching, or getting the most from a flagship floorstanding tower? Visit our Learning Center for guides, tips, and expert advice.