Parasound NewClassic 2250 v.2 Two Channel Power Amplifier - Black
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
- AVForums Highly Recommended 2023
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
Two Hundred and Seventy-Five Watts, Into Almost Anything
The 2250 v.2 is the bigger NewClassic, and the numbers say why. It makes 275 watts per channel into 8 ohms and 400 into 4, with 45 amps of peak current per channel behind it.
Like its smaller sibling it has a load switch. Set to the 2 to 3 ohm position, it holds 400 watts per channel into 2 ohms, which is the point where most amplifiers of this size start protecting themselves instead of playing music.
Bridged to mono it makes 750 watts into 8 ohms. So a pair of these is a genuinely serious monoblock rig, built from parts you can buy one at a time.
Inside the Chassis
It is a Class-AB design. Signal-to-noise is 114dB A-weighted at rated output and 106dB unweighted. Distortion measures 0.20% at full rated output and 0.015% at average listening levels, which is the figure that matters day to day.
Response runs 20Hz to 50kHz at −3dB. Input impedance is 33k ohms, with sensitivity of 1 volt in for 28.28 volts out, the THX standard, so it drops into a processor-based system without gain-matching surprises.
The chassis is 3U: 17-1/4 inches wide, 18-1/2 deep and 6 high, weighing 43 pounds. Parasound covers it with a 2-year parts and labor warranty for the original purchaser from an authorized dealer.
Who Is This Amplifier Best For?
- Your speakers are genuinely hard to drive — 400 watts per channel held into a 2 ohm load is the specification that separates this from amplifiers that merely quote a big 8 ohm number.
- You are running a processor-based system — input sensitivity follows the THX standard at 1 volt in for 28.28 out, so levels match a surround processor without a gain hunt.
- You want monoblocks eventually — bridged to mono it makes 750 watts into 8 ohms, so two of these build a serious rig one purchase at a time.
- You need rack height planned — a 3U chassis at 43 pounds, 18-1/2 inches deep, so the shelf and the depth both need checking before it arrives.
- You want separates — volume and input switching live in the preamp or streamer/DAC ahead of it. Halo P6 is the natural partner
How Does It Connect to Your System?
Feed it from a preamplifier or processor by RCA, and connect speakers to the binding posts. If your speakers dip toward 2 ohms, set the load switch to the 2 to 3 ohm position first.
Use the 12V trigger with its looping output to bring the rack up together, or let audio-signal sensing handle it. Allow for 18-1/2 inches of depth plus cables.
Pairs Well With
Here are some great companions:
- Preamplifier: Required, and the natural next decision — see our Preamplifiers.
- Speaker Cables: Carry the current properly — see our Speaker Cables.
- Interconnects: Balanced XLR is the better run from preamp to amp — see our Interconnect Cables.
- Audio Rack: Give a Class A/AB amplifier air around it — see our Audio Racks.
Frequently Asked Questions
How much power does it make?
275 watts per channel into 8 ohms and 400 into 4 ohms. With the load switch set to 2 to 3 ohms it holds 400 watts per channel into 2 ohms.
Can I bridge it to mono?
Yes. Bridged it makes 750 watts into 8 ohms, or 750 into 4 ohms with the load switch set.
Will it match my surround processor?
Yes. Input sensitivity follows the THX standard, 1 volt in for 28.28 volts out, with 33k ohms input impedance.
What distortion should I expect in normal use?
0.015% at average listening levels. The 0.20% figure applies only at full rated output.
How much rack space does it need?
A 3U chassis, 17-1/4 inches wide, 18-1/2 deep and 6 high, weighing 43 pounds.
What warranty does it carry?
Parasound covers it with a 2-year parts and labor warranty for the original purchaser from an authorized dealer.
See It in Action
AVForums reviews the 2250 v.2:
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about power amplifiers, matching an amp to your speakers, or building a separates system? Visit our Learning Center for guides, tips, and expert advice.
- THX Ultra2-certified two-channel Class AB power amplifier
- 275 watts per channel into 8 ohms
- 400 watts per channel into 4 or 2 ohms
- 750-watt bridged-mono operation into 8 or 4 ohms
- 45-amp peak current capability per channel
- Stable operation with 2-ohm speaker loads
- Two pairs of speaker outputs with front-panel A/B selection
- Rear-panel speaker-selector lockout
- Switchable 20Hz or 40Hz high-pass filter
- 12V trigger and audio-sensing automatic turn-on
- Fully discrete circuitry with high-current toroidal transformer
- Rear-panel left and right gain controls
- Gold-plated RCA inputs and heavy-duty five-way binding posts
- Optional RMK33 three-rack-space mounting kit
- Type: Two-channel Class AB power amplifier
- Stereo Output, 8 Ohms: 275 watts × 2
- Stereo Output, 4 or 2 Ohms: 400 watts × 2
- Bridged-Mono Output: 750 watts × 1 into 8 or 4 ohms
- Peak Current: 45 amps per channel
- Frequency Response: 20Hz–50kHz, +0/−3dB at 1 watt
- Dynamic Headroom: 1.6dB
- Total Harmonic Distortion: 0.20% at rated output; 0.015% at average listening levels
- Signal-to-Noise Ratio: 114dB at rated output, IHF A-weighted
- Input Impedance: 33 kilohms
- Input Sensitivity: 1V for 28.28V output
- Damping Factor: Greater than 150 at 20Hz
- Power Requirement: 110–120V or 220–240V, 50/60Hz
- Dimensions: 17.25 × 6 × 18.5 inches with feet and connected cables
- Net Weight: 43 lb. (19.5kg)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.










