PSB Imagine T65 Tower Loudspeaker - Satin White - Each
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
A Larger Midrange Driver, a Deeper Reach
The PSB Imagine T65 is a 3-way floorstanding tower and the larger sibling of the Imagine line, built around a 1-inch titanium dome tweeter, a dedicated 5.25-inch woven carbon fiber midrange driver, and two 6.5-inch woven carbon fiber woofers.
PSB rates sensitivity at 88 dB anechoic (90 dB in a real listening room), and recommends amplifiers between 20 and 200 watts into an 8-ohm nominal load (4 ohms minimum).
The cabinet is available in Satin White or Satin Black, and each tower is sold on its own, so a stereo pair means ordering two, one for each channel of a stereo system.
Where the Larger Midrange Driver Earns Its Keep
A Titanium Dome Tweeter Above a Larger Midrange Driver
The same 1-inch titanium dome tweeter used throughout the Imagine line crosses over to a dedicated 5.25-inch woven carbon fiber midrange driver at 2,000 Hz — a full size larger than the entry Imagine tower's midrange, for a smoother handoff to the tweeter above it.
Below 600 Hz, two 6.5-inch woven carbon fiber woofers take over, moving noticeably more air than the entry Imagine tower's woofers for deeper, more effortless bass with real low-end authority.
The Numbers, and What They Ask of Your Amplifier
PSB quotes a frequency response of 28 Hz to 23 kHz at ±3dB, extending to 19 Hz at -10dB. Sensitivity is 88 dB anechoic, nominal impedance is 8 ohms (4 ohms minimum), and recommended amplifier power is 20 to 200 watts.
Two pairs of binding posts ship for bi-wire or bi-amp use. At just over 44 pounds each, plan for a firm, level floor to support this larger, more substantial tower.
Who Is This Floorstanding Speaker Best For?
- You want the larger Imagine tower, not just the entry model — a bigger midrange driver and larger woofers move more air for deeper, more effortless bass
- You want a genuine 3-way tower, not a 2.5-way — a dedicated midrange driver handles vocals on its own, separate from the bass
- You want a real choice of finishes — Satin White or Satin Black, both ready to match a real room
- Your amplifier has real headroom to offer — 88 dB sensitivity into an 8-ohm load suits amplifiers between 20 and 200 watts
- You want real floorstanding bass without a separate subwoofer — the T65 reaches to 28 Hz on its own. For the deepest home-theater effects, add one of our subwoofers and let the towers do what they do best
How Does It Connect to Your System?
Connect each tower to an amplifier or receiver's speaker outputs using the rear binding posts. An 8-ohm nominal load (4 ohms minimum) suits amplifiers rated between 20 and 200 watts.
Two pairs of binding posts accept a single-wire run, or a bi-wire/bi-amp connection for more control over the signal.
At just over 44 pounds each, plan for a firm, level floor and enough clearance to move each tower into final position before connecting cables.
Pairs Well With
What finishes the system around a pair of Imagine T65 towers:
- Stereo amplifiers — a separate power amp gives this tower's wider 20-to-200-watt range real headroom to work with
- Integrated amplifiers — a quality integrated amplifier drives it well within its recommended range
- Speaker cables — single-wire or bi-wire runs, since this model supports both
- Audio racks — house the electronics driving the larger Imagine tower
Frequently Asked Questions
How much amplifier power do I need?
PSB recommends amplifiers between 20 and 200 watts. At 88 dB sensitivity into an 8-ohm load, most quality amplifiers in that range drive it well.
Can I bi-wire the T65?
Yes. Two pairs of binding posts ship for single-wire use with the factory jumpers in place; remove them to bi-wire or bi-amp.
What finishes are available?
Satin White or Satin Black, both ready to match a real room.
How is this different from the entry Imagine tower?
The T65 uses a larger 5.25-inch midrange driver and two 6.5-inch woofers, for deeper bass extension in a taller cabinet built for bigger rooms.
Do I need a subwoofer with these speakers?
Not necessarily. The T65 reaches to 28 Hz on its own, though a subwoofer can still add reach for home theater use.
See It in Action
Erin's Audio Corner reviews and measures the PSB Imagine T65.
The Listening Post unboxes the PSB Imagine T65.
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about speaker placement, amplifier matching, or getting the most from a floorstanding tower? Visit our Learning Center for guides, tips, and expert advice.
- Floorstanding Tower Speaker
- 3-Way, Dual Bass Reflex System with Individual Woofer Chambers and Two Rear Slot Ports
- Tweeter: 1" Titanium Dome with Ferrofluid Neodymium Magnet
- Midrange Driver: 5.25" Woven Carbon Fiber Cone with Rubber Surround
- Bass Driver: 2 x 6.5" Woven Carbon Fiber Cone with Rubber Surround
- Acoustically Transparent Cloth Grille
- Dual, 5-way Gold-plated Binding Posts, Bi-Wireable / Bi-Ampable
- Rear facing Slot Ports
- Aluminum Outrigger Bars and Spikes
- Gold-plated Jumpers
- Finish: Satin Black or Satin White
Frequency Response
- On Axis @ 0°±3dB: 28-23,000Hz
- On Axis @ 0°±1 1/2dB: 37-20,000Hz
- Off Axis @ 30°±1 1/2dB: 37-10,000Hz
- LF Cutoff -10dB: 19Hz
Sensitivity
- Anechoic Chamber: 88dB
- Typical Listening Room: 90dB
Impedance
- Nominal: 8 ohms
- Minimum: 4 ohms
Input Power
- Recommended: 20-200 watts
- Program: 200 watts
Crossover
- 2000Hz, LR4
- 600Hz, LR4
Dimensions
- Width: 8.375"
- Height: 38.8125"
- Depth: 13.5"
Weight
- 44 lb.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.











