Rega PL10 Turntable - Black - Aphelion 2 Cartridge
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
- Editor's Choice Award – Hi-fi Choice Magazine
- Editor's Choice Award – the-ear.net
- Recommended Component 2023 – Stereophile
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
Rega's Reference Turntable, Paired with a Reference Cartridge
The Rega PL10 (Planar 10) is Rega's flagship turntable, inspired by the no-compromise Naiad reference project. This version ships with the Aphelion 2 moving-coil cartridge, factory-mounted on its hand-built RB3000 tonearm.
An ultra-light skeletal plinth, diamond-cut ceramic platter, and ceramic double-brace system form the core of the design. The included PL10 outboard power supply is hand-matched to its own 24-volt motor. It adds electronic 33⅓/45 rpm switching and fine speed adjustment.
The PL10 is fully manual, with no built-in phono preamp. The Aphelion 2 is a low-output moving-coil design, so it pairs with a high-gain MC phono stage. Connect one and you are ready to play.
Where the Aphelion 2 Cartridge Earns Its Keep
A Reference Cartridge, Factory-Aligned
Rega calls the Aphelion 2 its fourth-generation handmade moving-coil cartridge. It has a boron rod cantilever and a Fine Line nude diamond stylus. The aluminum body is machined from one piece. Rega uses no tie wire and no foam damper.
A moving-coil design trades the higher output of a moving-magnet cartridge for lower moving mass. That is why it needs a dedicated high-gain MC phono stage to run properly. Rega mounts it with its three-point system and aligns it at the factory.
An RB3000 Tonearm, Built Without Compromise
The hand-built RB3000 uses preloaded, zero-tolerance bearings adjusted to less than one-thousandth of a millimeter. That gives it nearly friction-free movement with no play for the Aphelion 2 to fight against.
Its one-piece aluminum arm tube is hand-polished and assembled with very few mechanical joints and no adhesive. The signal path between cartridge and bearing stays as stiff and direct as Rega can make it.
What Reviewers Are Saying
SoundStage! Ultra's Jonathan Gorse called the Planar 10/Aphelion 2 pairing "a superb flagship vinyl spinner that competes closely with the very finest at its price point," adding it's "incredibly simple to set up, beautifully made, and aesthetically pleasing."
Who Is the Rega PL10 Best For?
- You want Rega's reference cartridge on its reference turntable — the Aphelion 2 arrives mounted and aligned on the RB3000, so there is nothing to buy or fit
- You want a reviewed flagship pairing — a reviewer has already heard this exact pairing
- You already own a high-gain MC phono stage — you connect it and start playing
- You want Rega's most refined chassis engineering — the skeletal plinth, ceramic double-brace and RB3000 tonearm carry ideas from Rega's Naiad project
- You run an MM-only phono input — the Aphelion 2 needs an MC phono stage, which you can add from our phono preamplifiers
How Does It Connect to Your System?
The attached RCA cable runs to an MC phono preamp set for the Aphelion 2's low output. Use the input on the phono stage, not a line input.
The Aphelion 2 arrives already mounted and aligned. Balance the tonearm and set tracking force and bias to Rega's specification during setup, then place the turntable on a firm, level surface.
Pairs Well With
What finishes the system around a Rega PL10:
- Phono preamplifiers — look for high-gain MC support to match the Aphelion 2
- Integrated amplifiers — look for one with a built-in MC-capable phono stage to skip a separate box
- Audio racks — a firm, level shelf a reference turntable needs
- Record cleaning machines — a clean groove matters even more with a reference cartridge
Frequently Asked Questions
Is the Aphelion 2 cartridge already installed?
Yes. Rega mounts and aligns it at the factory. You still balance the tonearm and set tracking force and bias to Rega's specification during setup.
Does the PL10 have a built-in phono preamp?
It needs an outboard one. Use a high-gain MC phono preamp, or an amplifier with one built in.
What settings does the Aphelion 2 need?
Rega recommends a 100 ohm load, 1000 pF capacitance and high gain on an adjustable MC phono stage. Tracking force is 1.9 g, and nominal output is 350 µV.
Can I use a standard MM phono input?
Add an MC stage first. The Aphelion 2's low-output moving-coil design needs a high-gain MC phono input.
Can it play 45 rpm records?
Yes. The included PL10 power supply switches electronically between 33⅓ and 45 rpm, with fine speed adjustment built in.
See It in Action
Russian Neuro Audiophile conducts a full test of the Rega Planar 10:
Audio Advice provides a first look at the Rega Planar 10:
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we’ve helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it’s right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about turntable setup, phono preamps, or getting the most from a moving-coil cartridge? Visit our Learning Center for guides, tips, and expert advice.
- Available in Black or White finishes
- Factory-fitted Rega Aphelion 2 moving coil cartridge
- Fine Line nude diamond stylus
- Lightweight, rigid boron-rod cantilever
- Ultra-low-mass iron micro-cross and coil assembly
- Hand-wound coil made with 0.018mm fine wire
- Powerful miniaturized neodymium magnet
- Undamped generator without a conventional tie wire
- Zero-tolerance, one-piece anodized aluminum cartridge body
- Rega three-point cartridge mounting system
- Hand-built RB3000 reference tonearm
- Preloaded, zero-tolerance tonearm bearings
- Ultra-light Tancast 8 foam-core skeletal plinth
- High-pressure laminate plinth skins
- Double-brace technology with ceramic top brace
- Diamond-cut ceramic oxide platter
- Low-mass central bearing assembly
- Twin Reference EBLT drive belts
- Hand-tuned 24-volt synchronous motor
- Custom-matched PL10 outboard power supply
- Electronic 33⅓ and 45 rpm speed selection
- User-adjustable electronic fine-speed control
- Advanced anti-vibration motor circuit
- Low-capacitance phono cable
- Removable single-piece dustcover
- Manual operation
- Drive System: Belt drive
- Operation: Manual
- Speeds: 33⅓ and 45 rpm
- Speed Selection: Electronic through PL10 power supply
- Motor: Hand-tuned 24-volt low-vibration synchronous motor
- Plinth: Tancast 8 polyurethane foam core with high-pressure laminate skins
- Bracing: Double-brace technology with ceramic top brace
- Platter: Diamond-cut ceramic oxide
- Drive Belts: Twin Rega Reference EBLT belts
- Central Bearing: Aluminum sub-platter, hardened tool-steel spindle, and custom brass housing
- Tonearm: Rega RB3000
- Tonearm Effective Mass: 11g
- Tonearm Effective Length: 236.5mm
- Tonearm Mounting Distance: 222mm
- Tonearm Overhang: 14.5mm
- Tonearm Offset Angle: 21.55 degrees
- Included Power Supply: Custom-matched Rega PL10 PSU
- Turntable Dimensions with Dustcover: 16.5" W x 4.5" H x 13.8" D
- Turntable Dimensions with Dustcover: 420 x 115 x 350mm
- Turntable Weight: 10.4 lbs. / 4.7kg
- PL10 PSU Dimensions: 8.6" W x 3.1" H x 12.6" D
- PL10 PSU Dimensions: 218 x 80 x 320mm
- PL10 PSU Weight: 6.6 lbs. / 3kg
- Cartridge: Rega Aphelion 2 moving coil
- Stylus: Fine Line nude diamond mounted at 90 degrees
- Cantilever: Boron rod
- Generator: Undamped, ultra-low-mass moving coil design
- Generator Assembly: Hand-wound coil on an iron micro cross
- Coil Wire: 0.018mm fine wire
- Magnet: High-power miniaturized neodymium
- Cartridge Body: Graded, zero-tolerance, black-anodized aluminum
- Cartridge Mounting: Rega three-point fixing
- Nominal Output: 350µV
- Output Impedance: 10 ohms
- Recommended Input Load: 100 ohms
- Recommended Capacitive Load: 1,000pF
- Recommended Gain: High MC gain
- Recommended Tracking Force: 1.9g
- Channel Balance: ≥10µV
- Channel Separation: ≥-29dB
- Cartridge Weight: 6g
- Built-In Phono Preamp: No
- Required Phono Input: Low-output moving coil
- Dustcover: Smoked with Black model; clear with White model
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.








