Rogue Audio RP-3 Preamplifier - Black
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
Balanced Tube Preamp With Class A Gain Stage
The Rogue Audio RP-3 is a tube preamplifier with true balanced connections. Rogue describes it as pure Class A tube amplification with MOSFET output buffering, assembled by hand. A dedicated home theater input and a processor loop cover surround sources alongside your stereo gear.
Two 12AU7/ECC802 tubes do the work. Three RCA line inputs and two balanced XLR inputs take your sources. A balanced XLR output pair, two variable RCA pairs and a fixed pair go the other way. A power amplifier and a subwoofer both have a home.
Why the XLR Connections Matter
A balanced run rejects the noise a long single-ended cable picks up on the way. That helps most when the power amplifier sits across the room from the rack.
Tubes handle the gain and MOSFETs drive the output. Output impedance is below 10 ohms, so a long cable or a demanding amplifier is no trouble. Frequency response runs 5Hz to 100kHz within 1dB, so the range is wide.
Distortion stays below 0.1 percent. Gain is 10dB through RCA and 16dB through XLR. Maximum output reaches 10V RMS single-ended and 20V RMS balanced, and those figures come straight from Rogue’s published specifications.
A defeatable OLED display shows volume and input, and a mono button helps with setup and with older recordings. A ten-function handheld remote handles most front-panel jobs plus mute.
The chassis is 18.5 inches wide, 17 deep and 4.5 high, and weighs 30 pounds. It carries a tube-based headphone amplifier on a quarter-inch front-panel jack. That stage is built into the preamplifier rather than tapped off the line stage.
Who Is This Preamplifier Best For?
- Your system is balanced end to end — two XLR input pairs and a balanced XLR output keep the noise rejection all the way to the amplifier
- Your power amplifier is across the room — low output impedance and up to 20V RMS of balanced drive suit a long cable run
- You want a hand-built tube line stage — Class A gain and a MOSFET output buffer, with RCA and XLR both fitted
- You listen on demanding headphones — the tube headphone amplifier is built into the chassis, so you skip a separate box
- You play records — the RP-3 has no phono stage, and every input is line level, so add one of our phono preamplifiers to any RCA line input and choose one to match your cartridge
How Does It Connect to Your System?
Balanced sources take the two XLR input pairs, and line sources fill the three RCA pairs. A surround processor uses the unity-gain home theater input, so the front channels pass through untouched when you watch a film.
Run the XLR outputs to your power amplifier, or use the variable RCA pairs and send the second pair to a subwoofer. A processor loop sits alongside. Headphones plug into the front panel. The box includes the remote and a power cord.
Pairs Well With
Building your system? Here are some great companions for the Rogue Audio RP-3:
- Stereo amplifiers to give the preamplifier a power stage
- Phono preamplifiers for the one thing the RP-3 leaves to you
- Interconnect cables including balanced XLR, where this preamplifier works best
- Headphones to use the front-panel headphone amplifier
Frequently Asked Questions
How many sources can I connect?
Five: two balanced XLR pairs and three RCA line pairs. A separate home theater input takes a processor without using one of them.
How do I connect a turntable?
Through an outboard phono preamplifier feeding one of the RCA line inputs. Every input on the RP-3 is line level.
Will it drive a power amplifier down a long cable?
Yes. Output impedance is below 10 ohms and the balanced output reaches 20V RMS, so a long balanced run is what it is built for.
Can it drive difficult headphones?
The headphone amplifier is built into the preamplifier on a quarter-inch jack, not tapped off the line stage.
What tubes does it use?
Two 12AU7/ECC802 tubes, a common type that is straightforward to replace.
What does the warranty cover?
Rogue covers the RP-3 for three years on parts and labor, with six months on the tubes.
See It in Action
A video walkthrough of the RP-3, its balanced connections and its headphone stage:
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we’ve helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it’s right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about balanced connections, tube preamplifiers, or matching a power amplifier? Visit our Learning Center for guides, tips, and expert advice.
- Pure Class A tube amplification with MOSFET output buffering
- Two 12AU7/ECC802 tube mu-follower design
- Built on Rogue Audio’s advanced RP-X hardware and software platform
- Two pairs of fully balanced XLR inputs
- Three pairs of RCA line-level inputs
- One pair of fully balanced XLR outputs
- Two pairs of RCA variable outputs
- One pair of fixed outputs
- Home Theater Bypass / Unity Gain inputs
- Processor loop
- High-power tube-based headphone amplifier
- Multiple linear power supplies
- Defeatable OLED display
- Mono function
- Slow-start turn-on sequencing
- Automatic mute at turn-on and turn-off
- Heavy-duty gold-plated RCA jacks
- Machined aluminum faceplate and controls
- Ten-function remote control
- Detachable IEC power cord
- Fully tested, burned-in, and auditioned before shipment
- Proudly handcrafted in the USA
- Type: Balanced vacuum-tube stereo preamplifier
- Tube Complement: 2 x 12AU7/ECC802
- Frequency Response: 5Hz–100kHz, ±1dB
- Total Harmonic Distortion: <0.1%
- Line Stage Gain: 10dB RCA; 16dB XLR
- Rated Output: 1V
- Maximum Output: 10V RMS RCA; 20V XLR
- Output Impedance: <10 ohms
- RCA Line-Level Inputs: 3 pairs
- Balanced XLR Inputs: 2 pairs
- RCA Variable Outputs: 2 pairs
- Balanced XLR Outputs: 1 pair
- Fixed Outputs: 1 pair
- Home Theater Bypass: Yes
- Processor Loop: Yes
- Headphone Amplifier: High-power tube-based design
- Power Requirements: 120/240V, 50/60Hz
- Dimensions (W x H x D): 18.5" x 4.5" x 17"
- Weight: 30 lbs.
- Shipping Weight: 35 lbs.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.




