Rogue Audio Sphinx v3 Integrated Amplifier - Silver - Silver Metal Remote
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
Rogue Puts the Tubes Where They Matter Most
The Sphinx v3 is a hybrid, and deliberately so. Tubes handle the preamplifier stage, where they shape tone, and a Class D solid-state output stage does the heavy lifting. The preamp runs 12AU7s in a mu-follower circuit. Rogue Audio hand-builds every unit in Pennsylvania.
That arrangement delivers 100 watts per channel into 8 ohms and 200 watts into 4 ohms. The amplifier weighs 25 pounds and measures 15.5 inches wide, with a machined aluminum faceplate in black or silver.
Your Turntable and Your Headphones Both Plug In
Four rear RCA inputs cover an RIAA phono stage plus three line-level sources. The phono section takes moving-magnet cartridges at 44dB of gain and moving-coil at 60dB, with adjustable resistive loading. Headphones get a discrete MOSFET amplifier.
This listing includes Rogue's silver metal remote, which handles volume and mute and is a Rogue option on the standard Sphinx v3. Buffered variable outputs feed a subwoofer or a second amplifier, and fixed outputs serve recording. Rogue covers parts and labor for three years, and the tubes for six months.
Built Around a Power Supply, Not a Spec Sheet
A custom 375VA toroidal transformer feeds a high-capacity linear supply. The circuit sits on a heavy two-ounce copper board. Speaker connections are five-way binding posts that take spade, lug or bare wire.
Frequency response runs 5Hz to 20kHz within 1dB, and distortion stays under 0.1% typically. Input sensitivity is 1.0V RMS, so any normal source will drive it properly. Distortion at rated power stays under 1%.
Two Things Worth Knowing Before You Buy
First, headphones are meant to be used with the amplifier in standby. Leave the tube section powered on and sound also reaches the speakers, so mute the output from the remote.
Second, phono gain and loading are slide switches on the circuit board, not rear-panel controls. Setting them means powering down for 30 minutes and removing ten cover screws, so set it once for your cartridge.
What Reviewers Are Saying
Herb Reichert reviewed the Sphinx v3 for Stereophile on 22 July 2020, calling it "one of the greatest high-value audio products of all time." He concluded it "delivers music with an eager expressive energy."
Marc Smazik reviewed it for pt.AUDIO on 13 May 2022, writing that "The dynamics in this amp are categorically impressive" and that after two years there is "not a single hint of buyer’s remorse."
Who Is This Integrated Amplifier Best For?
- You want tube tone without a tube amp's power ceiling — tube preamp, solid-state output, and 200 watts into 4 ohms
- You play records — a real RIAA phono stage handles both cartridge types, with adjustable loading
- You need one box to do everything — phono, three line inputs, a headphone amplifier and a subwoofer output are built in
- You want the metal remote — it is an option on the Sphinx v3, and this listing includes it
- If you want the upgraded parts, this is the standard build; the Sphinx v3 Magnum adds an upgraded power supply, JJ gold pin tubes and better passives
How Does It Connect to Your System?
Speakers go to the five-way binding posts. A turntable connects to the phono input, and a CD player, streamer or tuner fill Line 1 through 3. After switching off, wait a minute before switching back on so the supply can discharge.
Pairs Well With
Building a system around the Sphinx v3? Start here:
- Turntable: The phono stage is built in for either cartridge type — browse Turntables
- Speakers: 200 watts into 4 ohms suits a wide range — see our Bookshelf Speakers
- Subwoofer: The buffered variable outputs are made for this — browse Subwoofers
- Headphones: A discrete MOSFET headphone stage deserves good ones — see our Headphones
Frequently Asked Questions
Will the phono stage work with my cartridge?
Very likely. It gives 44dB of gain for moving magnet and high-output moving coil, or 60dB for low-output moving coil, with adjustable resistive loading. It ships at 44dB with 47k ohms.
Do the speakers go quiet when I plug in headphones?
The speakers stay live. Headphones are intended for use with the amplifier in standby. Mute the output from the remote if you leave the tube section on.
Is the power amplifier tubes or solid state?
Solid state, specifically Class D. The Sphinx v3 is a hybrid: a tube preamp stage driving a Class D output stage.
Can I add a subwoofer?
Yes. One pair of buffered variable outputs drives a subwoofer or a second amplifier.
What does the warranty cover?
Rogue Audio covers parts and labor for three years from the date of retail purchase, and the tubes for six months.
See It in Action
A walkthrough of the Sphinx v3:
Steve Guttenberg reviews the Sphinx v3 in his own listening room:
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about hybrid amplifiers, phono stages, or matching headphones to an amp? Visit our Learning Center for guides, tips, and expert advice.
- Hybrid integrated amplifier with a 12AU7 tube preamp stage (mu-follower circuit) and a Class D solid-state output stage
- 100 watts per channel into 8 ohms, 200 watts per channel into 4 ohms
- Designed and hand built in Pennsylvania
- Four rear RCA inputs: phono plus three line-level inputs
- RIAA phono stage for MM (44dB) and MC (60dB) cartridges with adjustable resistive loading
- Discrete MOSFET headphone amplifier
- Buffered variable outputs for a subwoofer or second amplifier, plus fixed outputs for recording
- Custom 375VA toroidal transformer and high-capacity linear power supply
- Heavy 2-ounce copper circuit board
- Five-way binding posts accept spade, lug or bare wire
- Machined aluminum faceplate
- Silver metal remote with volume and mute included
- Finish: Silver
- Product Type: Hybrid Tube Preamp / Class D Integrated Amplifier
- Power Output: 100 watts / ch (8 ohms), 200 watts / ch (4 ohms)
- Preamp Tubes: 12AU7 (mu-follower circuit)
- Output Stage: Class D
- Frequency Response: 5Hz - 20kHz, within 1dB
- Distortion: Under 0.1% typical, under 1% at rated power
- Input Sensitivity: 1.0V RMS
- Analog Inputs: 4 x RCA (Phono, Line 1, Line 2, Line 3)
- Phono Gain: 44dB (MM) / 60dB (MC)
- Headphone Amplifier: Discrete MOSFET
- Outputs: Buffered variable and fixed
- Remote Control: Silver metal remote, volume and mute
- DAC / Bluetooth: None
- Width: 15.5"
- Weight: 25 lbs.
- Finish: Silver
- Country of Manufacture: USA
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
