Solidsteel WS5 Turntable Wall Shelf - Black

No-Compromise "11 on a Scale of 10" Wall Shelf Supports the Heaviest Turntables

If you want to put your turntable on a wall shelf, but your 'table is too heavy for wall shelves you've found so far, don't climb the wall in frustration. Give your heavy turntable the wall support it needs with Solidsteel WS-5.

Whether your vinyl playback performance has been suffering from floor-borne vibration or you simply have limited floor space, you and your turntable will benefit from the WS-5.

Reference-Level Isolation

The WS-5 is a rock-solid platform delivering reference-level isolation at an attainable price. Designed for the heaviest turntables, it can support up to 132 pounds. A heavy-gauge steel perimeter and massive wall plate are complemented by graceful touches, adding air and life to what might otherwise have been a monolithic design.

"It Pegs the Value Scale"

"Whether you are having issues with a wiggly floor or would like to accommodate another turntable in your listening room, the Solidsteel WS-5 is a great way to get the job done," reports Jeff Dorgay in TONEAudio magazine. "Allen screws combined with tiny cones under the shelf allow for fine tuning shelf height so that your table is perfectly level."

"I'm thrilled with the result, both functionally and sonically. The fit and finish are superb as well," notes TomS, audiocircle.com. "I feel it pegs the value scale. An 11 on a scale of 10 for me."

Large Shelf and Ridiculously Sturdy Design

With a large shelf measuring 19.5" wide x 16.25" deep x 0.74" thick, the WS-5 works with almost any turntable. Weighing in at a massive 28 pounds and ridiculously sturdy, the WS-5 touts a big 2"-high by 1"-thick steel outer frame welded to an extremely thick 6"-highback plate. The 1"-square crossbars are taken directly from Solidsteel’s own audio racks.

The proprietary Duraluminum isolation cones are inherited from Solidsteel's racks, too. Leveling of the MDF shelf with laminate black finish may be fine-tuned via the four cone cups using an included Allen key.

Mounting Requirements

The WS-5 is capable of truly staggering weight handling capability only when mounted to a proper structure and with proper hardware. Designed for 16" studs, the WS-5 can also be mounted on virtually any other load bearing structure (brick, concrete, etc.) as long as the appropriate connectors are used.

For brick or concrete walls, use the included 1/8" x 2" concrete anchor bolts. For drywall or other types of hollow walls, use toggle bolts (not included), which can hold up to 100 lb.