Vincent Audio SA-T7MK Tube Stereo Preamplifier - Black
✔ 60-Day Money-Back Guarantee — Try it risk-free for 60 days
✔ Free Shipping on orders over $49
✔ Financing Available — Pay over time | Learn more
✔ Price Guarantee — We match authorized dealer pricing | Details
✔ Expert Help — Call us at 800-942-0220 weekdays 9am–6pm EST
Delivery and Shipping
Delivery and Shipping
- Audio Advisor will ship products anywhere in the United States, including Alaska, Hawaii, and U.S. Territories.
- For more information, visit our Delivery & Shipping Policies.
Nine Tubes, and a Bluetooth Receiver
Vincent's SA-T7 MK is a tube preamplifier with nine valves inside: four 6SCH9P, four 6SCH51P, and an 85A2 regulator holding the supply steady. All of them are new old stock, sourced from telecommunications supplies.
A DAC Beside the Glass
What makes it unusual is what sits alongside the tubes. Optical and coaxial digital inputs feed a PCM5100-based converter running to 24-bit/192kHz. Bluetooth 5.0 handles a phone. A TV, a CD transport and a tablet all reach a tube preamp without a separate DAC on the shelf.
Analog connections are generous too. Six RCA line inputs take the rest of your system. Two RCA pre-output pairs go out to amplifiers, with a record output alongside them and two 3.5mm jacks to switch a compatible power amplifier in step.
What the Bench Says About the Glass
Tubes are usually a trade. Here the numbers do not read that way. Frequency response covers 10Hz to 100kHz within a tenth of a decibel. Distortion stays below 0.001% at 1kHz, and signal-to-noise is typically better than 100dB A-weighted.
Gain That Suits Your Power Amp
Gain is 13.3dB at the volume control's maximum, from an input sensitivity of 430mV for two volts out. That is a comfortable match for most power amplifiers, and it keeps the volume useful across more of its travel.
The chassis measures 16.9 by 5.3 by 14.6 inches and weighs 18.7 pounds, in black or silver. Power draw peaks at 58 watts, so nine tubes do not turn your rack into a radiator. The VRC-13 remote handles mute, volume and direct input selection.
What Reviewers Are Saying
Anthony Kershaw reviewed the SA-T7 MK for Audiophilia on August 1, 2024. He found that "the SA-T7 packs an audiophile wallop." On the tubes he noted: "Vincent has taken great pains to implement their tubes (all NOS used in telecommunications)."
One quirk is worth knowing before it arrives. Kershaw notes there is "no on/off on the remote". You switch the preamp on at the front panel, and the handset then covers mute, volume and input select.
Who Is This Preamplifier Best For?
- You want tubes without a separate DAC — optical, coaxial and Bluetooth are built in, so a TV and a disc player join a valve preamp with no converter to buy
- Your system is mostly analog — six RCA line inputs let a tuner, a CD player and a streamer all stay connected at once
- You run two amplifiers or a subwoofer — two pre-output pairs feed both from the same volume control, with no splitter or second preamp to buy
- You keep gear a long time — the valves are new old stock types built for telecom duty, so a tube preamp stops feeling like a maintenance project
- You play records — the SA-T7 MK takes line and digital sources, so choose one of our phono preamplifiers to match your cartridge and feed it into any RCA input
How Does It Connect to Your System?
Run one RCA pre-output pair to your power amplifier and keep the second for a subwoofer. Analog sources fill the six line inputs. The record output sends a fixed level to a recorder.
A TV or disc player connects by optical or coaxial, and a phone pairs over Bluetooth. Wire the 3.5mm power-control jacks to a compatible amplifier and the two switch together. Power up at the front panel, then use the remote.
Pairs Well With
Building around the SA-T7 MK? Here are some great companions:
- Stereo power amplifiers — the power-control jacks are ready for one
- Phono preamplifiers — to bring a turntable into the system
- CD players and transports — for the coaxial or optical input
- Interconnect cables — good RCA cable suits a tube front end
Frequently Asked Questions
What tubes does it use?
Nine in total: four 6SCH9P, four 6SCH51P, and one 85A2 regulator tube in the power supply.
Does it have a built-in DAC?
Yes. The optical and coaxial inputs feed an onboard converter that handles up to 24-bit/192kHz.
Can I stream from my phone?
Yes. Bluetooth 5.0 is built in and appears as its own input, so a phone or tablet connects without extra hardware.
How many inputs and outputs are there?
In: six RCA line pairs, one optical, one coaxial and Bluetooth. Out: two RCA pre-output pairs, a record output, and two 3.5mm power-control jacks.
How warm does it run?
Power consumption peaks at 58 watts. Give it ventilation above and behind, as you would any valve component, and it will happily stay on all evening.
What finishes and warranty are available?
Black or silver. Vincent covers the SA-T7 MK for two years on parts and labor, and the tubes for 90 days.
See It in Action
AV Atmos introduces the SA-T7 MK:
Why Audio Advisor?
- 40+ Years of Expertise — Since 1981, we’ve helped over a million music lovers find the right gear.
- 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it’s right for you.
- Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
- Free Shipping — On orders over $49, delivered to your door.
- Flexible Payment Options — Financing available so you can start listening now.
Learn More
Want to learn more about tube preamplifiers, Bluetooth streaming, or matching a preamp to a power amplifier? Visit our Learning Center for guides, tips, and expert advice.
- Hybrid tube stereo preamplifier with patented BestPentode circuitry
- Low-noise tube gain stage engineered for linearity and speed
- Vimala power-supply coupling module isolates the audio circuit
- Built-in 24-bit/192kHz DAC
- Bluetooth 5.0 wireless playback
- Optical and coaxial digital inputs
- Six stereo RCA analog inputs
- Two stereo RCA variable outputs and one record output
- Selectable 50-ohm or 600-ohm output impedance
- Bass and treble controls with bypass
- Motorized volume control
- Dimmable tube-viewing window illumination
- Metal system remote controls input, volume and mute
- NOS tube complement selected for long operating life
- Power-control outputs for compatible Vincent components
- Available in black or silver
- Type: Hybrid vacuum-tube stereo preamplifier
- Frequency Response: 10Hz–100kHz, ±0.1dB
- THD: Less than 0.001% at 1kHz, 2V output into 10 kilohms
- Signal-to-Noise Ratio: Greater than 100dB, A-weighted
- Gain: 13.3dB
- Input Sensitivity: 430mV for 2V output
- Maximum Output Voltage: 3V
- Input Impedance: Greater than 22 kilohms
- Selectable Output Impedance: 50 ohms or 600 ohms
- DAC: PCM5100, up to 24-bit/192kHz
- Bluetooth: Version 5.0
- Analog Inputs: Six stereo RCA pairs
- Digital Inputs: One optical, one coaxial and Bluetooth
- Outputs: Two stereo RCA pre-outs; one stereo RCA record output
- Tube Complement: Four 6SCH9P, four 6SCH51P and one 85A2 NOS tubes
- Maximum Power Consumption: 58W
- Dimensions: 16.9" W x 5.3" H x 14.5" D
- Weight: 18.7 lb. (8.5kg)
- Finish: Black or silver
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.










