Vincent Audio SP-332 Hybrid Stereo Amplifier - Silver

Audio Performance

• Hybrid Design — Tubes Where They Matter Most: Two 6N16 vacuum tubes in the input stage deliver the warmth and natural tone of tube amplification, while eight FET output transistors provide the power, control, and reliability to drive even the most demanding speakers.
• 150 Watts Per Channel (8 ohm) / 250 Watts Per Channel (4 ohm): Serious power backed by a 500-watt toroidal transformer and 80,000 microfarads of filter capacitance — this amplifier delivers effortless dynamics and deep, authoritative bass.
• Tube-Stabilized Power Supply: A dedicated 6N15 tube handles voltage stabilization, keeping the operating conditions steady for the most critical part of the circuit — the kind of detail that separates good amplifiers from great ones.
• Wide Frequency Response: 20 Hz to 20 kHz within +/- 0.5 dB — flat, accurate performance across the entire audible range.
• Low Distortion: Total harmonic distortion under 0.1% at 1 kHz and 1 watt — clean, transparent amplification that lets the music through without coloration.
• Signal-to-Noise Ratio Greater Than 91 dB: A quiet background that reveals subtle details in your recordings.

Connectivity

• Balanced XLR and Single-Ended RCA Inputs: Both connection types are available and switchable from the rear panel — use whichever your preamp supports for the best possible signal path.
• Dual Speaker Outputs: Two sets of high-quality binding posts per channel (four per channel total), individually switchable from the front panel. Run two speaker pairs, switch between rooms, or bi-wire a single pair.
• 12V Power Control Trigger: 3.5mm trigger input and output for automated power on/off with compatible components.

Design & Build

• Serious Build Quality: At 46.3 lbs (21 kg), this is a substantial piece of audio equipment. The massive toroidal transformer, large filter capacitor bank, and heavy-gauge construction all contribute to the SP-332's effortless sound.
• VU Meters with Selectable Backlighting: Front-panel analog VU meters show real-time output levels and add classic visual appeal. Choose from red, blue, green, or white backlighting via a rear-panel switch.
• Speaker Selection Buttons: Front-panel illuminated buttons let you switch between speaker pairs A and B without reaching around the back.
• German-Engineered: Designed by Vincent's engineering team in Germany and built with premium components throughout.

• Type: Hybrid Stereo Power Amplifier (tube input / FET output)
• Power Output: 2 x 150W RMS (8 ohm) / 2 x 250W RMS (4 ohm)
• Frequency Response: 20 Hz – 20 kHz (+/- 0.5 dB)
• THD: < 0.1% (1 kHz, 1W)
• Signal-to-Noise Ratio: > 91 dB
• Input Sensitivity: 1.35V
• Input Impedance: 47 kOhm
• Tubes: 2x 6N16, 1x 6N15
• Output Transistors: 8x FET (4 per channel)
• Power Supply: 500W toroidal transformer, 80,000 µF capacitance
• Inputs: 1x Stereo RCA, 1x Stereo XLR, 1x 3.5mm Power Control
• Outputs: 2 pairs speaker terminals per channel (4 total per channel), 1x 3.5mm Power Control
• Max Power Consumption: 531W
• Dimensions (W x H x D): 16.9 x 6.5 x 16.9 in (430 x 165 x 430 mm)
• Weight: 46.3 lbs (21 kg)
• Finish Options: Black or Silver

What's in the Box

• Vincent Audio SP-332 Hybrid Stereo Power Amplifier
• Power cable
• User manual
• (Verify with manufacturer: remote control, if applicable)