Monitor Audio Silver 100 8G Bookshelf Speakers - Pair

A True Three-Way, in a Standmount Cabinet

Most standmounts are two-ways, with one driver covering everything from bass to the crossover. The Silver 100 8G is a true three-way. An 8-inch C-CAM bass driver, a dedicated 3-inch C-CAM midrange driver and a 25 mm C-CAM Gold Dome tweeter each take their own band.

The crossovers sit at 610 Hz and 2.9 kHz. That leaves the bass driver doing only bass and gives the voice range a driver of its own, which is the reason Monitor Audio built the cabinet bigger this generation.

RST III, and Why the Cones Are Dimpled

Both the bass and midrange cones use Rigid Surface Technology III, the third generation of Monitor Audio’s dimpled cone surface. The pattern stiffens the metal so the cone moves as a piston rather than flexing, and Monitor Audio credits it with deeper, more controlled low frequencies.

The Numbers, and What They Ask of You

Monitor Audio quotes an in-room response of 33 Hz to 35 kHz at minus 6 dB. Sensitivity is 87 dB. Nominal impedance is 8 ohms, with a minimum of 3.7 ohms at 140 Hz, so the amplifier needs to be comfortable with a real load.

The recommendation is 50 to 200 watts into 8 ohms, or 100 to 400 watts into 4 ohms. Continuous power handling is 200 watts and peak output is quoted at 114 dB. The rear port is tuned to 37 Hz.

The Port Borrowed From an Owl

Monitor Audio calls it the Silent Flow port. Its flare geometry is modeled on the interlocking wing feathers that let an owl fly without noise, guiding air smoothly through the port and cutting the chuffing sound a plain port can make on deep notes.

What Reviewers Are Saying

Ed Selley reviewed the Silver 100 8G for Sound Advice on August 18, 2026, and found "the result is cleaner, better controlled (but still impressively deep) bass. More than that, it’s bass you can feel as well as hear".

On the handover: "Close your eyes and listen to the Silver 100 8G – there are precious few audible clues that there is more than one driver at work, let alone three." His conclusion: "This is a fascinating, extremely likeable speaker."

Tim Hancock reviewed them on video for AVForums on August 17, 2026; his review is embedded below. Selley’s one caution is size: "this speaker really ought to be seen as an alternative to some floorstanders."

Who Are These Bookshelf Speakers Best For?

• You want three-way clarity without a tower — a dedicated midrange driver is rare in a standmount, and it is what keeps voices clear when the bass is working hard
• Your room is medium to large — an 8-inch driver, a 37 Hz port and 114 dB of headroom are built to fill space, and they will overwhelm a small room
• Your amplifier is a serious one — the load dips to 3.7 ohms, so pick one of our integrated amplifiers with real current behind its 50 to 200 watts, not just a matching number
• You want a system, not just a pair — the Silver 8G range includes matching center, on-wall and Atmos models, so a stereo pair can grow into a home theater with the same voicing
• Budget for heavy stands — at 17.3 inches tall and 26 pounds 11 ounces each, these are not bookshelf speakers in the literal sense, and they need stands with a large top plate rated for the weight

How Do They Connect to Your System?

Speaker cable runs from your amplifier to the binding posts on the back of each cabinet, red to red and black to black, with both runs the same length. Given the 3.7 ohm dip, favor an amplifier with current to spare over one that merely matches the wattage.

Stands are not optional here. Choose a pair rated for the weight with a top plate wide enough for a 9-inch cabinet, bring the tweeter to ear height, and pull the speakers off the rear wall so the port can breathe.

Pairs Well With

What finishes the setup. These are the categories most Silver 100 8G owners shop next.

• Speaker stands — essential, and they need to be substantial
• Integrated amplifiers — 50 to 200 watts into 8 ohms, with current to match
• Speaker cables — a clean, low-loss run, equal lengths
• Subwoofers — optional at 33 Hz, but useful for film

Frequently Asked Questions

Will these fit on a bookshelf?

Realistically, they will not. Each cabinet is 17.3 inches tall, 9.1 wide and 13.9 deep, and weighs 26 pounds 11 ounces. They belong on stands with a large top plate.

How much amplifier power do they need?

Monitor Audio recommends 50 to 200 watts into 8 ohms, or 100 to 400 watts into 4 ohms, with 200 watts of continuous handling. The 3.7 ohm minimum means current matters as much as watts.

Why does a standmount need a separate midrange driver?

Because it frees the bass driver to do only bass. In a two-way, one cone covers everything up to the tweeter, so a big bass note and a voice share the same driver at the same moment. Here they do not.

How low does the bass go?

Monitor Audio specifies 33 Hz in-room at minus 6 dB, with the port tuned to 37 Hz. That is floorstander territory, and it is why a subwoofer is optional for music.

What finishes are there?

High Gloss Black, European Walnut and Satin White. Monitor Audio covers the speakers with a five-year warranty.

What is the next step up?

The Monitor Audio Gold 100 6G, the standmount from Monitor Audio’s Gold range.

See It in Action

Tim Hancock reviews the Silver 100 8G for AVForums:

Monitor Audio unboxes the Silver Series 8G:

Why Audio Advisor?

• 40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
• 60-Day Money-Back Guarantee — Take your time. Listen, enjoy, and make sure it's right for you.
• Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
• Free Shipping — On orders over $49, delivered to your door.
• Flexible Payment Options — Financing available so you can start listening now.

Learn More

Want to learn more about standmount speakers, choosing speaker stands, or matching an amplifier to your speakers? Visit our Learning Center for guides, tips, and expert advice.