Free Shipping on US orders above $49
What You Need to Know
Your Vinyl Collection Outgrew the Shelf
You bought the Vulcan TT Turntable Stand thinking 100+ records was plenty. Then a year went by. Now you've got 150, maybe 175 albums — and the bottom shelf is full. The new ones are stacking up on the floor next to the stand.
This add-on shelf solves it. One kit gives you another full LP storage shelf, designed to slide right onto your existing Vulcan TT or Vulcan Audio Rack. Another 100+ records, all in the same piece of furniture.
Each LP shelf holds up to 80 pounds of vinyl — roughly 200 records depending on the thickness. So if your collection is on the smaller side or you've got a lot of single LPs vs. boxed sets, you may even fit more than 100 on the new shelf.
The X-Brace Trick — Strength That Grows With Your Collection
200 vinyl records can weigh up to 80 pounds. That's a lot of weight on one shelf. So how does Pangea keep the stand rigid even when the new shelf is loaded?
Two steel X-braces — one on each side of the shelf level. They lock the four 13" posts together, locking the new shelf into a stiff unit.
The clever part: as you add more records, the X-braces tighten. Weight makes the frame stronger, not weaker. So your stand grows tougher as your collection grows bigger.
Tool-Less Install — Same Easy Vulcan Method
Like every Vulcan accessory, this kit needs zero tools to install. No screwdriver. No wrench. Just your hands.
To add it: flip your stand upside down, slide the new posts onto the existing threaded rods, attach the two X-braces, set the new shelf in place, and hand-tighten the side tubes. About 5 to 10 minutes of work.
One Pangea owner said adding a Vulcan shelf was "as easy as changing a light bulb." This one's a couple extra steps for the bracing — still simple, still no tools.
What's in the Box
- One Vulcan LP storage shelf (23.75" × 18" × 0.625"), vinyl-wrapped MDF in your chosen finish
- Four 13" steel support posts (black sand powder-coated)
- Two steel X-braces (one for each side)
- Threaded rods and hardware
For full carton contents, please refer to the manufacturer's assembly instructions.
Will This Fit My Stand?
This LP storage add-on shelf fits the following Pangea Vulcan products:
A few notes on planning your build:
- Total stand height should stay under 42" for best rigidity. Plan accordingly if you're stacking shelves.
- Total recommended stand storage capacity is 240 lbs. total. Plenty for a generous record collection.
- You can mix LP storage shelves with regular component shelves on the same stand any way you like.
Not sure if this will work with your setup? Call us at 800-942-0220 — we'll help you plan it out.
Pairs Well With
- Need a Component Shelf Too? — Add a regular component shelf for a phono preamp, DAC, or amp: Pangea Vulcan Add-On Shelf with 7.25" Posts.
- Bigger Vinyl Footprint? — If your collection has way outgrown the original stand, consider the Pangea Vulcan TTx2 Turntable Stand — built from the start for 200+ records.
- Storage Drawer — Stash record brushes, stylus cleaners, and clamps under your turntable shelf. Pangea Vulcan Duo 2" Storage Drawer.
- Floor Protectors — Adding 80+ lbs of vinyl to your stand? Make sure your floor is protected. Sonic Saucers Isolation Discs (Set of 4).
- Turntable Accessories — Browse our full selection of Turntable Accessories — record brushes, stylus cleaners, alignment tools, and more.
- Record Cleaning Gear — Keep your collection sounding its best. Browse Record Cleaning Machines and Accessories.
Features & Specifications
Features
- Add-On LP Storage Shelf — Adds capacity for 100+ vinyl records to your existing Vulcan TT or Vulcan Audio Rack.
- Tall 13" Posts — Designed for upright LP storage with full jacket clearance.
- Steel X-Braces (Two) — Side-mounted bracing locks the new shelf into a rigid unit. Tighter as you load more records.
- 80 lb. Weight Capacity — Strong enough for 100+ records (vinyl is heavier than it looks).
- Open-Air Design — Easy to flip through records and reach behind for cable runs.
- Tough Vinyl-Wrapped MDF — Resists scratches, scuffs, and most spills. Easy to wipe clean.
- Tool-Less Install — About 5 to 10 minutes by hand.
- Modular — Mix LP storage shelves with regular component shelves any way you like, up to 42" total stand height.
Specifications
| Shelf Size (W × D × Thickness) | 23.75" × 18" × 0.625" (603 × 457 × 16 mm) |
| Steel Support Tube Height | 13" (330 mm) |
| LP Capacity | 100+ vinyl records |
| Shelf Weight Capacity | 80 lbs. (36 kg) |
| Total Recommended Stand Capacity | 240 lbs. (110 kg) |
| Max Recommended Stand Height | 42" total |
| Shelf Material | Premium MDF, vinyl-wrapped |
| X-Bracing | Two steel side X-braces |
| Post Material & Finish | Steel, black sand powder coat |
| Compatible Stands | Vulcan TT Turntable Stand, Vulcan Audio Rack |
| Installation | Tool-less; hand-tighten |
Frequently Asked Questions
How many records will it really hold?
100+ standard LPs. Vinyl weight varies — single LPs are about 0.25 lbs each, while boxed sets and 180-gram audiophile pressings can be heavier. The shelf is rated for 80 lbs total. So depending on your collection, you might fit 100 to 200+ records on the new shelf.
How tall is the LP storage section?
About 13" of usable clearance — plenty for any standard 12" LP jacket with room above for easy access. You can flip through records without bending down.
Do I really not need any tools to install this?
That's right — no tools needed. The kit slides onto the existing threaded rods of your stand and uses the same hand-tightened side tubes. Most folks finish in 5 to 10 minutes.
What's the X-brace, and why does it matter?
It's two steel cross-supports — one on each side of the new shelf level. Vinyl is heavy. The X-braces lock the four posts together and keep the stand rigid under load. The clever part: as you add more records, the braces tighten. So a fully-loaded shelf is actually stronger than an empty one.
Will this fit my Vulcan Audio Rack — the regular shelf rack?
Yes. Pangea's compatibility list includes both the Vulcan TT Turntable Stand and the standard Vulcan Audio Rack. So if you've got a 4-shelf or 5-shelf Vulcan and want to dedicate one level to vinyl storage, this kit will work.
Can I add more than one LP storage shelf to my stand?
Yes, as long as you stay under the 42" total stand height limit and the 240 lb total weight capacity. Most folks add one or two LP shelves to their existing stand. If your collection is well past 200 records, consider the Vulcan TTx2 Turntable Stand, which was built from the start for 200+ records.
Where does the new shelf go on my stand?
Most folks add it to the bottom — flip the stand upside down and bolt the new shelf onto the bottom. To add it in the middle, you'll need to partially disassemble the upper section, slide the new shelf in, and rebuild. Bottom is always easier.
Will the new shelf change how my turntable plays?
No. The X-braces actually make the whole stand more rigid, which is good for turntable performance — less vibration travels up to your gear. The top platform stays exactly where it was, just with more records below it.
Are returns easy if it doesn't fit?
Yes. Audio Advisor offers a 60-day money-back guarantee. If it's not right for your setup, send it back. Just keep the original packaging.
Why Audio Advisor?
40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
60-Day Money-Back Guarantee — Try it, listen, and make sure it's right for you.
Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
Free Shipping — This product may also qualify for free shipping to your door.
