Free Shipping on US orders above $49
What You Need to Know
Make Room for Taller Gear
Your Vulcan rack came with 7-inch posts. That's perfect for slim DACs, streamers, and most modern amps. But what if you've got something bigger — a chunky tube amp, a tall power amp, or a turntable that needs more headroom?
That's where these come in. Swap the 7-inch posts on any one shelf for these 10-inch posts. You instantly gain 3 inches of clearance on that shelf — enough room for almost any tall component.
Each set includes four 10-inch steel posts and four matching steel X-Brace side crossmembers. They install in minutes — no tools needed, just like the rest of your Vulcan rack.
An Upgrade for Standard Vulcan Racks Too
Here's something cool: these aren't just for X-Brace racks. They fit the standard Vulcan Audio Rack too — the regular 3-shelf, 4-shelf, and 5-shelf models. They also fit the Vulcan TT Turntable Stand.
If you've got a standard Vulcan and install these, you get two upgrades at once: extra height on that shelf AND the rigidity boost that X-braces bring. The X-braces lock that shelf level into a stiffer unit, which can help reduce vibration and tighten up the rack's feel.
Some owners use a single set on the bottom shelf for floor-standing amps. Others mix posts to get just the right spacing for each piece of gear.
What's in the Box
- Four 10-inch steel support posts (black sand powder-coated)
- Four steel X-Brace side crossmembers
Will These Fit My Rack?
These posts fit the following Pangea Vulcan products:
Not sure if these will work with your setup? Call us at 800-942-0220 — we'll help you figure it out.
Pairs Well With
- Standard 7" Add-On Shelf — Need a complete extra shelf instead of just taller posts? Pangea Vulcan Add-On Shelf with 7.25" Posts.
- Storage Drawer — Make better use of that extra clearance with a slide-out drawer for accessories. Pangea Vulcan Duo 2" Storage Drawer.
- Floor Protectors — If you're rebuilding your rack anyway, a fresh set of floor discs is a smart add. Sonic Saucers Isolation Discs (Set of 4).
- More Pangea Add-Ons — Browse extra shelves, casters, and other Vulcan accessories on our Pangea Audio Racks page.
Features & Specifications
Features
- 10-Inch Post Height — Swap your 7" posts for these to gain 3 extra inches of clearance for tall gear.
- Includes X-Braces — Four steel side crossmembers add rigidity wherever you install them — even on standard (non-X-Brace) Vulcan racks.
- Tool-Less Install — Same hand-tightened design as the rest of your Vulcan rack. Takes minutes.
- Resonance-Resistant Finish — Black sand powder coat fights both scratches and metal ringing.
- Universal Vulcan Fit — Works with the Vulcan Audio Rack, X-Brace Rack, and TT Turntable Stand.
Specifications
| Post Height | 10" (254 mm) |
| Quantity | 4 posts + 4 X-Brace crossmembers |
| Material | Steel |
| Finish | Black sand powder coat (scratch- and resonance-resistant) |
| Compatible Racks | Vulcan Audio Rack, Vulcan X-Brace Rack, Vulcan TT Turntable Stand |
| Replaces | Standard 7" Vulcan posts (sold with rack) |
| Installation | Tool-less; hand-tighten |
Frequently Asked Questions
How much extra clearance will I gain?
About 3 inches per shelf you upgrade. The standard Vulcan posts are 7 inches; these are 10 inches. So if your tube amp needs 9 inches of headroom, swap one set of posts and you've got room.
Do I need to upgrade every shelf?
No. Most folks just swap one set on the shelf where they need more space. You can mix 7-inch and 10-inch posts on the same rack however you like.
I have a standard (non-X-Brace) Vulcan rack. Will these still work?
Yes. They fit the standard Vulcan Audio Rack just fine. As a bonus, you'll also gain the X-brace rigidity on whichever shelf you install them. It's a nice two-for-one upgrade.
What's the difference between this and the regular 10-inch Vulcan posts?
Pangea makes a non-X-Brace version (just plain 10" posts). This X-Brace version adds the side crossmembers for extra rigidity. We recommend the X-Brace set unless you specifically need the non-X-Brace version for clearance reasons.
Are these the same diameter as my existing posts?
Yes. They use the same threaded-bolt connection as every Vulcan post, so they swap in place of your existing 7-inch posts with no other changes needed.
Do I need any tools to install them?
No. Just unscrew your existing 7-inch posts by hand, and screw the new 10-inch posts in. The whole swap takes about 5 minutes per shelf.
Do these come in finishes other than black?
The posts only come in black — the same scratch- and resonance-resistant black sand powder coat used on every Vulcan rack. The black posts work with all four Vulcan shelf finishes (Black, Carbon Fiber, Rosenut, and Espresso).
Will these affect the rack's weight capacity?
No. The X-Brace posts add rigidity, if anything. Your shelves still hold their rated weight (75 lbs. for standard Vulcan, 90 lbs. for the X-Brace version).
Are they returnable if they don't fit?
Yes. Audio Advisor offers a 60-day money-back guarantee. If they don't work for your setup, send them back. Just keep the original packaging.
Why Audio Advisor?
40+ Years of Expertise — Since 1981, we've helped over a million music lovers find the right gear.
60-Day Money-Back Guarantee — Try them, listen, and make sure they're right for you.
Real Experts, Real Help — Our team is here to answer your questions at 800-942-0220, weekdays 9am–6pm EST.
Free Shipping — On orders over $49, delivered to your door.
